[SMM Analysis] in March, the operating rate of the aluminum profile industry rebounded sharply and may remain stable in April.

Đã xuất bản: Apr 14, 2020 19:39
According to SMM statistics, the operating rate of the aluminum profile industry was 54.92% in March, up 26.30% from the previous month, down 5.49% from the same period last year.

According to SMM statistics, the operating rate of the aluminum profile industry was 54.92% in March, up 26.30% from the previous month, down 5.49% from the same period last year.

In March, the domestic epidemic situation was basically controlled, the progress of enterprise start-up production accelerated, and profile enterprises in Hubei also resumed production one after another, so the operating rate of the aluminum profile industry rebounded sharply from the previous month; however, the overseas epidemic has a greater impact on export-oriented profile enterprises, so it has declined from the same period last year.

In terms of scale, the month-on-month increase in the operating rate of large, small and medium-sized enterprises is more than 20%, among which large enterprises have the largest month-on-month increase, and large enterprises have obvious advantages in personnel, orders, anti-risk ability, etc.; according to categories, the operating rate of industrial profile enterprises is more than 60%, and the operating rate of construction profiles is slightly lower, but it has also reached 53.73%. From the specific feedback, some serious epidemic areas and small enterprises have just returned to work in early March, and only a small number of large-scale enterprises have just returned to work at full capacity; after the problem of employee isolation basically ended in mid-March, the opening rate of enterprises has continued to rise; domestic demand orders began to break out in the latter ten days, but the impact of export orders also affected the production of some profiles. In terms of terminals, there is strong demand in real estate, infrastructure and other industries, with some enterprises with abundant orders scheduled for more than a month, while demand in automobile, photovoltaic and other industries has shown a downward trend, and new orders have been reduced to varying degrees.

Raw materials and finished products, affected by price factors, profile enterprises mostly purchase raw materials according to orders, but also a small number of low-price hoarding, and due to the sharp drop in aluminum prices led to a reduction in shipments of aluminum bar holders, some areas of profile enterprises have a difficult to find difficulties; for end customers in low aluminum prices in advance orders also have strict pick-up cycle requirements, as far as possible to avoid the accumulation of finished goods inventory. In addition, some customers under the impact of the epidemic force majeure breach of contract, which also makes profile enterprises in the signing and implementation of new orders more strict and cautious.

The expectations of enterprises for April are also divided, industrial profile enterprises are slightly pessimistic compared with construction profile enterprises, or directly or indirectly affected by exports, but the relatively exuberant domestic demand can make up for some of the export losses in the short to medium term. The overall operating rate of the aluminum profile industry in April may be stable.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Giá nguyên liệu tăng hỗ trợ chi phí tăng trong khi áp lực nguồn cung tích tụ [Đánh giá tuần Anode nung sơ bộ SMM]
7 giờ trước
Giá nguyên liệu tăng hỗ trợ chi phí tăng trong khi áp lực nguồn cung tích tụ [Đánh giá tuần Anode nung sơ bộ SMM]
Đọc thêm
Giá nguyên liệu tăng hỗ trợ chi phí tăng trong khi áp lực nguồn cung tích tụ [Đánh giá tuần Anode nung sơ bộ SMM]
Giá nguyên liệu tăng hỗ trợ chi phí tăng trong khi áp lực nguồn cung tích tụ [Đánh giá tuần Anode nung sơ bộ SMM]
7 giờ trước
Giá Nhôm Florua Tăng do Hỗ Trợ Chi Phí; Chênh Lệch Giá Nguồn Cung Cao Cấp Mở Rộng [Đánh Giá Hàng Tuần Muối Florua SMM]
7 giờ trước
Giá Nhôm Florua Tăng do Hỗ Trợ Chi Phí; Chênh Lệch Giá Nguồn Cung Cao Cấp Mở Rộng [Đánh Giá Hàng Tuần Muối Florua SMM]
Đọc thêm
Giá Nhôm Florua Tăng do Hỗ Trợ Chi Phí; Chênh Lệch Giá Nguồn Cung Cao Cấp Mở Rộng [Đánh Giá Hàng Tuần Muối Florua SMM]
Giá Nhôm Florua Tăng do Hỗ Trợ Chi Phí; Chênh Lệch Giá Nguồn Cung Cao Cấp Mở Rộng [Đánh Giá Hàng Tuần Muối Florua SMM]
7 giờ trước
ADC12 củng cố đà tăng khi chi phí tăng và đơn hàng cải thiện nhẹ [Đánh giá tuần về nhôm phế liệu và nhôm thứ cấp]
7 giờ trước
ADC12 củng cố đà tăng khi chi phí tăng và đơn hàng cải thiện nhẹ [Đánh giá tuần về nhôm phế liệu và nhôm thứ cấp]
Đọc thêm
ADC12 củng cố đà tăng khi chi phí tăng và đơn hàng cải thiện nhẹ [Đánh giá tuần về nhôm phế liệu và nhôm thứ cấp]
ADC12 củng cố đà tăng khi chi phí tăng và đơn hàng cải thiện nhẹ [Đánh giá tuần về nhôm phế liệu và nhôm thứ cấp]
[Bản tin hàng tuần nhôm phế liệu và nhôm thứ cấp: ADC12 củng cố ở mức cao do chi phí tăng và đơn hàng cải thiện nhẹ] Về chênh lệch giá, ngày 10/9, chênh lệch giữa nhôm A00 và phế liệu nhôm định hình trộn không sơn tại Phật Sơn khoảng 2.436 nhân dân tệ/tấn, chênh lệch giữa nhôm A00 và phế liệu nhôm vụn căng khoảng 1.415 nhân dân tệ/tấn, đều nới rộng nhẹ so với tuần trước. Về nguồn cung, tình trạng khan hiếm nguyên liệu thô vẫn chưa thay đổi, và sự khan hiếm phế liệu nhôm có hóa đơn hợp quy tiếp tục gia tăng, hạn chế hoạt động và thu mua của các doanh nghiệp sử dụng phế liệu. Trong bối cảnh đó, một số bãi phế liệu nhôm...
7 giờ trước