Macro Roundup (Jul 2)

Đã xuất bản: Jul 02, 2019 09:36 (GMT+8)
A roundup of global macroeconomic news last night and what is expected today

SHANGHAI, Jul 2 (SMM) – This is a roundup of global macroeconomic news last night and what is expected today.

Last night

The US dollar rose to two-week highs as US-China trade tensions eased after the world’s two largest economies agreed to restart trade talks. 

Base metals ended mostly lower as LME zinc lost 1.24%, lead slid 0.85%, copper fell 1%, aluminium dipped 0.14%, nickel declined 2.76%, while tin nudged up. SHFE zinc eased 1.58%, copper slipped 1.29%, tin fell 0.31%, aluminium went down 0.83%, nickel closed 2.26% lower, while lead advanced 0.03%.  

China’s manufacturing shrank unexpectedly in June, notching its worst reading since January, according to the Caixin/Markit survey results.

The Caixin/Markit factory purchasing managers’ index (PMI) for June stood at 49.4, compared with the expected 50.1. PMI readings above 50 indicate expansion, while those below that signal contraction.

The lacklustre reading was due to new orders falling into contractionary territory, pointing to shrinking domestic demand, said Zhengsheng Zhong, director of macroeconomic analysis at CEBM Group, a subsidiary of Caixin. 

“The gauge for new export orders also returned to contractionary territory, but was better than the levels seen from last April to last December. Front-loading by exporters was likely to support this gauge as the China-US trade relationship was under great uncertainty,” Zhong wrote in a report. 

“Overall, China’s economy came under further pressure in June. It’s crucial for policymakers to step up countercyclical policies. New types of infrastructure, high-tech manufacturing and consumption are likely to be the main policy focuses,” he added.

Manufacturing in the eurozone was weaker than forecast, as the manufacturing PMI fell for the fifth consecutive month, analysts at IHS Markit said on Monday.

The final eurozone manufacturing PMI was assessed at 47.6 for June, falling from the flash assessment of 47.8 for manufacturing released earlier in the month.

Despite reaching a four-month high, Germany remained the weakest performing nation at 45, with Austria, Spain, Ireland and Italy also recording PMI readings below 50, and only marginal growth recorded for the Netherlands.

Unemployment in Germany fell slightly in June compared to the previous month, data from the Federal Labour Office showed on Monday, but underemployment grew, pointing to a weakening in the economy.

Seasonally adjusted unemployment fell by 1,000 to 2.281 million compared to the month before. The unemployment rate remained at 5%.

According to the US manufacturing PMI report published by the IHS Markit, the business activity in the manufacturing sector in June expanded with the headline PMI ticking up to 50.6 from 50.5 in May.

"US manufacturers reported business conditions to have remained the toughest for nearly a decade in June. The past two months have seen the lowest readings since the height of the global financial crisis in 2009," commented by Chris Williamson, chief business economist at IHS Markit.

Separately, the US manufacturing PMI for June surveyed by the Institute for Supply Management (ISM) also beat market expectations. The index dipped to 51.7 from the prior reading of 52.1, but above the expected 51.

Day ahead

Germany will release data on its actual retail sales for May. The sixth OPEC and non-OPEC ministerial meeting will take place today in Vienna, Austria.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
[SMM Tin nhanh Kim loại quý]
13 giờ trước
[SMM Tin nhanh Kim loại quý]
Đọc thêm
[SMM Tin nhanh Kim loại quý]
[SMM Tin nhanh Kim loại quý]
Thị trường kim loại nhóm bạch kim của Trung Quốc tiến một bước lớn tới quốc tế hóa. Từ ngày 28 tháng 9, các hợp đồng tương lai và quyền chọn bạch kim và palladi trên Sở Giao dịch Tương lai Quảng Châu (GFEX) mở cửa cho các nhà đầu tư nước ngoài đủ điều kiện. Ra mắt vào tháng 11 năm 2025, các hợp đồng này đã chứng kiến sự mở rộng ổn định về khối lượng giao dịch trong nước. Sự tham gia của các tổ chức nước ngoài được kỳ vọng sẽ tiếp tục tăng cường thanh khoản thị trường và củng cố ảnh hưởng của Trung Quốc trong việc hình thành giá bạch kim và palladi toàn cầu.
13 giờ trước
[SMM Tin nhanh Kim loại Quý]
13 giờ trước
[SMM Tin nhanh Kim loại Quý]
Đọc thêm
[SMM Tin nhanh Kim loại Quý]
[SMM Tin nhanh Kim loại Quý]
Valterra Platinum cho biết việc triển khai các ngăn tuyển nổi Jameson tại mỏ PGM Mogalakwena đã mang lại khoản tiết kiệm đáng kể về chi phí, năng lượng và carbon. Việc lắp đặt này giúp cắt giảm khoảng 3.000 lượt xe tải mỗi năm, giảm 70,5 MWh điện năng tiêu thụ cho luyện kim và giảm khoảng 70.000 tấn khí thải CO₂, với mức tiết kiệm chi phí hằng năm là 203 triệu ZAR. Những lợi ích này chưa bao gồm các khoản lợi ích bổ sung từ tỷ lệ thu hồi kim loại được cải thiện.
13 giờ trước
Tharisa Ký Quỹ Tiền Trái Phiếu Karo
15 giờ trước
Tharisa Ký Quỹ Tiền Trái Phiếu Karo
Đọc thêm
Tharisa Ký Quỹ Tiền Trái Phiếu Karo
Tharisa Ký Quỹ Tiền Trái Phiếu Karo
[SMM PGM Flash] Tharisa ngày 25/9 cho biết số tiền thuần thu được từ trái phiếu có bảo đảm kỳ hạn 5 năm trị giá 300 triệu USD đã được ký quỹ sau khi một điều kiện thanh toán quan trọng được đáp ứng. Được phát hành thông qua Arxo Finance với giá bằng 98% mệnh giá, trái phiếu có lãi suất coupon 11%. Tharisa dự định dùng số tiền thu được để hoàn tất dự án Karo Platinum tại Zimbabwe, tùy thuộc vào các điều kiện còn lại để giải ngân. Bước ký quỹ thúc đẩy việc cấp vốn cho một nguồn kim loại nhóm bạch kim tiềm năng trên dải Great Dyke của Zimbabwe. Số tiền này vẫn chưa được giải ngân cho Tharisa và Karo chưa phải là một mỏ đã hoàn thiện. Công ty đặt mục tiêu đưa quặng đầu tiên vào nhà máy của Karo trong quý IV/2027; cả việc giải ngân lẫn cột mốc vận hành đó đều vẫn còn ở phía trước.
15 giờ trước