Alumina, primary aluminium output grows in Oct

Đã xuất bản: Nov 09, 2018 10:28 (GMT+8)
China produced 6.039 million mt of alumina in Oct, up 0.3% from a year ago, with average daily output at 195,000 mt

SHANGHAI, Nov 8 (SMM) – China produced 6.039 million mt of alumina in October, up 0.3% from a year ago, with average daily output at 195,000 mt, 1.7% lower than September. In January-October, China’s alumina output totaled 58.144 million mt, standing 1.7% higher than the same period last year.

Alumina output in October grew on the month as new capacity at Shanxi Xinfa Chemical and East Hope'sJinzhong Chemical generated more output.

Last month, Xinfa Group reduced output at its Shanxi Jiaokou alumina refinery due to maintenance at its power plant. Environmental probes impacted production at some alumina refineries in Lvliang in Shanxi, and bauxite shortages forced some alumina refineries in Guizhou to cut output. These factors capped gains in overall alumina output in October.

SMM expects average daily output alumina in November to increase to 201,000 mt in November as refineries in Shanxi recovered their output. This is estimated to generate 6.025 million mt of alumina output for the month of November.

The alert for heavy-pollution alert issued by Henan during November 1-5 impacted operation at two alumina refineries in Zhengzhou.

China produced 3.114 million mt of primary aluminium in October, up 3.5% compared to a year earlier. This grew overall output in January-October to 30.166 million mt, standing 0.8% lower than the corresponding period last year.

As of the end of October, there is about 37.48 million mt of primary aluminium capacity in operation across China and about 4.82 million mt of idle capacity. Operating rates dipped 0.3 percentage point from a month ago to 88.6%.

New capacity continues to be commissioned while older, inefficient capacity continues to be cut. Operating capacity expanded since September after a steep contraction in July-August. SMM data showed over 1.5 million mt of primary aluminium capacity has been cut thus far this year.

Newly-commissioned capacity did not significantly grow output of aluminium ingot as the process of starting primary aluminium production would deplete some molten aluminium.

In November, aluminium producers who run in losses are likely to deepen their output cuts as they face higher costs in Gansu, Qinghai and Henan. New capacity will come online in Inner Mongolia, Guangxi and Yunnan.

SMM expects output of primary aluminium to come in at 3.03 million mt in November, 4.3% higher from a year ago, but the year-over-year growth in year-to-date output would remain in contraction territory, of 0.4%.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Phí gia công phôi nhôm Nam Xương tăng vào ngày 15 tháng 10
47 phút trước
Phí gia công phôi nhôm Nam Xương tăng vào ngày 15 tháng 10
Đọc thêm
Phí gia công phôi nhôm Nam Xương tăng vào ngày 15 tháng 10
Phí gia công phôi nhôm Nam Xương tăng vào ngày 15 tháng 10
Ngày 15 tháng 10, phôi nhôm Nam Xương Φ90 được báo giá 23.860 nhân dân tệ/tấn, phí gia công 600 nhân dân tệ/tấn (tăng 150 nhân dân tệ so với ngày giao dịch trước); Φ120 ở mức 23.810 nhân dân tệ/tấn, phí gia công 550 nhân dân tệ/tấn (tăng 150 nhân dân tệ); Φ178 ở mức 23.810 nhân dân tệ/tấn, phí gia công 550 nhân dân tệ/tấn (tăng 150 nhân dân tệ). Giá nhôm giao ngay SMM A00 ở mức 23.260 nhân dân tệ/tấn.
47 phút trước
Phí gia công phôi nhôm Vô Tích tăng vào ngày 15 tháng 10
47 phút trước
Phí gia công phôi nhôm Vô Tích tăng vào ngày 15 tháng 10
Đọc thêm
Phí gia công phôi nhôm Vô Tích tăng vào ngày 15 tháng 10
Phí gia công phôi nhôm Vô Tích tăng vào ngày 15 tháng 10
Ngày 15/10, phôi nhôm Vô Tích Φ90 được báo giá 23.800 NDT/tấn, phí gia công 540 NDT/tấn (tăng 100 NDT so với phiên trước); Φ120 giá 23.700 NDT/tấn, phí gia công 440 NDT/tấn (tăng 100 NDT); Φ178 giá 23.680 NDT/tấn, phí gia công 420 NDT/tấn (tăng 100 NDT). Giá giao ngay nhôm A00 SMM ở mức 23.260 NDT/tấn.
47 phút trước
Phí gia công phôi nhôm Phật Sơn tăng vào ngày 15 tháng 10
47 phút trước
Phí gia công phôi nhôm Phật Sơn tăng vào ngày 15 tháng 10
Đọc thêm
Phí gia công phôi nhôm Phật Sơn tăng vào ngày 15 tháng 10
Phí gia công phôi nhôm Phật Sơn tăng vào ngày 15 tháng 10
Ngày 15 tháng 10, phôi nhôm Phật Sơn Φ90 được báo giá ở mức 23.710 NDT/tấn, phí gia công ở mức 410 NDT/tấn (tăng 110 NDT so với ngày giao dịch trước đó); Φ120 ở mức 23.660 NDT/tấn, phí gia công ở mức 360 NDT/tấn (tăng 110 NDT); Φ178 ở mức 23.660 NDT/tấn, phí gia công ở mức 360 NDT/tấn (tăng 110 NDT). Giá nhôm giao ngay SMM A00 (Phật Sơn) ở mức 23.300 NDT/tấn.
47 phút trước
Alumina, primary aluminium output grows in Oct - Shanghai Metals Market (SMM)