Divergent Downstream Consumption Coupled with Destocking, SHFE Aluminum Short-Term Oscillation and Adjustment [SMM Aluminum Morning Meeting Minutes]

Published: Jun 5, 2026 09:12
[Divergence in Downstream Consumption Combined with Destocking: SHFE Aluminum Expected to Fluctuate in the Short Term] The tug-of-war between longs and shorts on the macro front has intensified. Amid geopolitical risks in the Middle East, wait-and-see sentiment in the market is expected to persist. The supply gap outside China is expected to provide strong floor support for aluminum prices, and expectations of rising energy costs are also expected to drive aluminum prices higher. However, high inventory pressure in China remains relatively pronounced and is expected to limit the upside room for domestic aluminum prices. In the short term, domestic aluminum prices are expected to mainly fluctuate and adjust.

SMM Morning Meeting Minutes, Jun 5

Futures:The most-traded SHFE aluminum 2607 contract closed at 24,310 yuan/mt, down 0.29%. The price was running below the MA5 (24,466.00), MA10 (24,440.50), MA30 (24,582.83), and MA60 (24,674.17) moving averages. Short- and medium-term moving averages were gradually turning downward, with the overall structure in the doldrums, and the upper moving averages forming resistance. The MACD indicator DIF (-77.3342) was below the DEA (-73.8095), with the MACD green bar at -7.0494. Bearish green bars slightly emerged, and bullish momentum was gradually weakening. The suggested core trading range for SHFE aluminum is 24,000-24,800 yuan/mt. The LME aluminum 3M contract closed at $3,663/mt, down 0.22%, edging down slightly. The price was running below the MA5 (3,704.90) and MA10 (3,683.75), while holding above the MA30 (3,605.63) and MA60 (3,522.65). Long-term moving averages remained in a bullish alignment, with short-term slight pressure but a stable medium-term upward trend. The MACD indicator DIF (44.0187) was below the DEA (45.4665), with the MACD green bar at -2.8956. The indicator turned from red to green, with short-term bullish momentum slightly weakening while the medium-term bullish pattern remained intact. The suggested core trading range for LME aluminum is $3,650-3,800/mt.

Macro Front:China side, the PBOC conducted 500 billion yuan in outright reverse repo operations on June 5, with a tenor of 3 months. In June, 800 billion yuan in 3-month outright reverse repos will mature. After the June 5 operation, a net 300 billion yuan will be drained, marking the fourth consecutive month of reduced rollovers for 3-month outright reverse repos. Ex-China side, US President Trump said he would not rule out meeting with Iran's new supreme leader if the US and Iran ultimately reach a deal. Trump reiterated that the US would never allow Iran to possess nuclear weapons, and that the US had "completely destroyed" Iran's nuclear facilities in a previous strike. US Fed side, with the June 17 rate decision approaching, CME FedWatch data showed a 96.2% probability of rates remaining unchanged in June and an 84.3% probability in July. The market even began discussing the possibility of a rate hike, with CME data showing a 12.3% probability of a 25-basis-point rate raise in July. Russian President Putin said Russia was fully prepared and willing to hold peace talks with Ukraine at a US military base in Anchorage, Alaska. Putin also said that controlling the Donbas region and reaching a peace agreement with Ukraine were not contradictory.

Fundamentals:Supply side, according to SMM data, China's aluminum production edged down this week. The proportion of liquid aluminum rebounded 0.12 percentage points WoW. Downstream demand for liquid aluminum was moderate, and the key focus remained on aluminum semis exports. Inventory side, as of Thursday, China's aluminum ingot social inventory destocked by 26,000 mt WoW from Thursday and by 11,000 mt from Monday, with the destocking pace accelerating. Downstream processing sectors showed divergence. Although it was the off-season, strong export demand in some sectors partially offset weak domestic demand. Operating rates for secondary alloy, aluminum plate/sheet and strip, and aluminum foil declined on a weekly basis, while primary alloy operating performance recovered. Aluminum wire and cable and aluminum extrusion sectors remained generally stable. Overall, the weekly operating rate of leading downstream enterprises edged down 0.1 percentage points WoW.

Primary aluminum market:In early trading, the SHFE aluminum 2606 contract fluctuated downward, with the overall price center rising significantly from the previous trading day. Affected by the sharp rise in aluminum prices, downstream buying sentiment weakened notably. The east China market was relatively soft yesterday, with transaction prices continuing to weaken. Mainstream spot quotes in the market ranged from SMMA00 minus 20 yuan/mt to minus 10 yuan/mt. Yesterday, the east China market shipment sentiment index was 3.01, flat WoW; the purchase sentiment index was 2.7, down 0.13 WoW. Yesterday, SHFE aluminum futures prices continued to rise from the early session, coupled with weak off-season orders from downstream processing enterprises in central China, overall buying sentiment in the market remained subdued. Enterprises mainly focused on digesting inventories and purchasing as needed in small quantities, with only some traders purchasing in large volumes for term arbitrage when premiums were low. The actual transaction price range in the central China market ultimately centered around a discount of 230-270 yuan/mt against the SHFE aluminum 06 contract. Yesterday, the central China market shipment sentiment index was 2.89, flat WoW; the purchase sentiment index was 2.17, down 0.01 WoW.

Aluminum scrap:Yesterday, the SMM A00 price fell 250 yuan/mt from the previous trading day, and the aluminum scrap market followed the decline overall. Supply side, regulatory enforcement of the "reverse invoicing" policy continued to tighten. Tax rebate cancellations and stricter tax audits in some provinces led to rising costs of invoiced raw materials, with some enterprises in Anhui, Jiangxi and other regions already experiencing production cuts or suspensions. Warehouse inflows at aluminum scrap distribution hubs declined YoY, and aluminum tense scrap inventory decreased due to reduced inflows. Currently, compliance costs in the raw material recycling process remained elevated, available invoiced supplies continued to be tight, and invoice scarcity became a core price support. Meanwhile, amid disruptions from the US-Iran conflict, the price spread between domestic and overseas markets was inverted, making imported low-priced quality supplies scarce and weakening supplementation to the domestic market. Demand side, off-season effects emerged, with operating rates of downstream scrap utilization enterprises running at low levels. End-user order follow-through was sluggish, and enterprises maintained strategies of purchasing as needed with low inventory, creating a cautious purchasing atmosphere. Aluminum scrap market prices are expected to continue holding up well at elevated levels. The persistent tightness of compliant invoiced supplies will provide bottom support for aluminum scrap prices. The lagged contraction effect of imported aluminum scrap has not been fully released, and subsequent port arrivals will remain at low levels. Under the pattern where the overseas market outperforms the domestic market, import supplementation will remain limited. Meanwhile, as the off-season deepens, downstream scrap utilization enterprises face concerns over order sustainability. These enterprises maintain strategies of purchasing as needed and keeping low inventory, making it difficult for the purchasing atmosphere to improve significantly. Currently, the industry faces elevated invoicing risks, with strengthening expectations of supply-side contraction, while weak downstream demand exerts downward pressure, presenting an overall pattern of weak supply-demand dynamics.

Secondary Aluminum Alloy:Spot market: Yesterday, SMM's ADC12 quote was lowered by 100 yuan/mt to 23,900 yuan/mt, with the market showing some resistance to decline. The price pullback was mainly driven by the weakening of SHFE aluminum and aluminum alloy futures; however, tight supply of compliant aluminum scrap and high raw material and compliance costs for enterprises provided some price support. In addition, production cuts by some enterprises tightened spot cargo circulation, with shortages even occurring in certain regions, supporting some manufacturers in holding firm on their quotes. In the short term, prices are expected to move sideways, and if the tight situation regarding invoice sources and raw material supply remains unresolved, the downside room for ADC12 will be relatively limited.

Aluminum Market Summary:The tug-of-war between longs and shorts on the macro front is intensifying. Amid risks from Middle Eastern geopolitical tensions, wait-and-see sentiment is expected to persist in the market. The ex-China supply gap is expected to provide strong floor support for aluminum prices, and expectations of rising energy costs are also providing a bullish driver for aluminum prices. However, high inventory pressure in China remains relatively evident and is expected to limit the upside room for domestic aluminum prices. In the short term, domestic aluminum prices are expected to mainly undergo range-bound adjustments.

[The information provided is for reference only. This article does not constitute direct advice for investment research decisions. Clients should make prudent decisions and not replace independent judgment with this information. Any decisions made by clients are not related to SMM.]

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM‘s internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or to learn more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
Zhongqing Robotics Launches T800 Humanoid Robots, Marking New Era of Mass Production
35 mins ago
Zhongqing Robotics Launches T800 Humanoid Robots, Marking New Era of Mass Production
Read More
Zhongqing Robotics Launches T800 Humanoid Robots, Marking New Era of Mass Production
Zhongqing Robotics Launches T800 Humanoid Robots, Marking New Era of Mass Production
[SMM Flash News] According to reports, the Zhongqing Shenzhen Honghualing Intelligent Manufacturing Base has officially been put into operation, and the first batch of T800 humanoid robots successfully rolled off the production line, marking Zhongqing Robotics’ official entry into a new stage of large-scale delivery at the ten-thousand-unit level. This production site integrates intelligent manufacturing, R&D, and testing functions, boasts industry-leading production efficiency, and can achieve the production of one humanoid robot every 15 minutes. Its T800 humanoid robot stands 1.73 meters tall and weighs 75 kg, and adopts an integrated die-casting process using aerospace-grade high-strength aluminum alloy, balancing lightweight characteristics with overall structural stability.
35 mins ago
Jinhua Daya Auto Parts' Phase 2 Project Nears Completion, Set to Boost NEV Component Output
36 mins ago
Jinhua Daya Auto Parts' Phase 2 Project Nears Completion, Set to Boost NEV Component Output
Read More
Jinhua Daya Auto Parts' Phase 2 Project Nears Completion, Set to Boost NEV Component Output
Jinhua Daya Auto Parts' Phase 2 Project Nears Completion, Set to Boost NEV Component Output
[SMM Snapshot] According to reports, the second-phase construction project of Jinhua Daya Auto Parts Co., Ltd., with an annual output of 500,000 auto parts, in the NEV Town of Jinhua Development Zone, has recently entered the acceptance stage. Production lines for processes such as stamping and die-casting are being rapidly advanced and are about to start trial production. Daya Auto is a core supporting enterprise in the NEV industry chain, primarily supplying auto body and chassis metal sheet welding parts to automakers like Leap Motor. The company's first-phase factory has been smoothly put into operation, mainly providing the right front compartment longitudinal beam assembly for Leap Motor's Jinhua production site. The second-phase project adds perfected process systems including stam
36 mins ago
Shanghai Jingzhi Invests in Communication and Automotive Parts Project via Subsidiary
38 mins ago
Shanghai Jingzhi Invests in Communication and Automotive Parts Project via Subsidiary
Read More
Shanghai Jingzhi Invests in Communication and Automotive Parts Project via Subsidiary
Shanghai Jingzhi Invests in Communication and Automotive Parts Project via Subsidiary
[SMM Flash] According to reports, Shanghai Jingzhi Industrial Co., Ltd. recently announced that the company plans to invest through its wholly-owned subsidiary Anhui Jingzhi Intelligent Manufacturing Co., Ltd. in the construction of the “Communication Structural Parts and Precision Automotive Parts Production Project,” to further optimize the layout of its precision manufacturing capacity and build integrated delivery capabilities.
38 mins ago
Register to Continue Reading
Gain access to the latest insights in metals and new energy
Already have an account?sign in here
Divergent Downstream Consumption Coupled with Destocking, SHFE Aluminum Short-Term Oscillation and Adjustment [SMM Aluminum Morning Meeting Minutes] - Shanghai Metals Market (SMM)