Monthly operating rate at China galvanising plants

เผยแพร่แล้ว: Apr 16, 2024 18:24
According to the new SMM survey sample with a total capacity of 39.02 million mt/year, the average operating rate at galvanising plants stood at 55.47% in March, up 30.8 percentage points from the previous month and down 8.05 percentage points from the same period last year. Output was 1.80 million mt.

According to the new SMM survey sample with a total capacity of 39.02 million mt/year, the average operating rate at galvanising plants stood at 55.47% in March, up 30.8 percentage points from the previous month and down 8.05 percentage points from the same period last year. Output was 1.80 million mt.

According to the old sample, the average operating rate was 55.03% in March, up 30.52 percentage points month on month but down 19.3 percentage points year on year (involving a capacity of 10.81 million mt and the output was 495,900 mt).

In February most companies stopped production for the Chinese New Year holiday. In addition, traders and some companies replenished their inventories after the holiday. Therefore, operating rates increased significantly. Orders in March were lower than expected. Most galvanising enterprises purchased on demand, and the inventory of zinc ingots decreased. Most galvanising enterprises resumed normal production in early March, but orders were weak due to the impact of the Two Sessions and environmentally-driven production restrictions as well as the weakening of ferrous metals prices. As such, the average operating rate decreased year-on-year.

The average operating rate of large producers with an annual capacity above 500,000 mt jumped 34.34 percentage points month-on-month to 59.73%. According to SMM survey, companies basically resumed work in March, and the number of working days increased. Most of the large galvanising factories are galvanised pipe factories. Although they were affected by the Two Sessions and environmental protection control, the impact was insignificant. Most companies were producing normally, but the prices of ferrous metals were weak in March and orders were lower than expected, resulting in a large inventory of finished products at large galvanised pipe factories. The production of large galvanised structural parts factories gradually got back on track, but due to industry competition, their profits were low.

The average operating rate of mid-sized producers with annual capacity between 100,000-500,000 mt rose 25.40 percentage points on the month to 46.50%. Most medium-sized enterprises were galvanised structural parts plants, and they resumed production in March. Orders from steel tower companies were stable and the delivery was urgent, ensuring full production; but other sectors did not see any new orders after the CNY holiday.

The average operating rate at small enterprises with an annual capacity of and below 10,000 mt rose by 17.08 percentage points from the previous month to 44.62%. The production time in March increased significantly compared with February, and production basically recovered in March. However, small enterprises were mainly galvanised structural parts enterprises whose new orders were poor, and their operating rates underperformed those of medium and large enterprises.

The average operating rate is estimated at 57.74% in April, up 2.27 percentage points month on month, according to the production plans. In April, the prices of ferrous metals rebounded. Currently, traders need to replenish stocks, and orders are expected to increase significantly. The silent period of the photovoltaic sector has basically ended, and orders are expected to recover in April. The tower sector remains stable.

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
บังเกอร์ฮิลล์เดินหน้าเปิดเหมืองตะกั่ว-สังกะสีอีกครั้ง ตั้งเป้าเริ่มการผลิตเชิงพาณิชย์ภายในสิ้นปี 2569
6 ชั่วโมงที่แล้ว
บังเกอร์ฮิลล์เดินหน้าเปิดเหมืองตะกั่ว-สังกะสีอีกครั้ง ตั้งเป้าเริ่มการผลิตเชิงพาณิชย์ภายในสิ้นปี 2569
อ่านเพิ่มเติม
บังเกอร์ฮิลล์เดินหน้าเปิดเหมืองตะกั่ว-สังกะสีอีกครั้ง ตั้งเป้าเริ่มการผลิตเชิงพาณิชย์ภายในสิ้นปี 2569
บังเกอร์ฮิลล์เดินหน้าเปิดเหมืองตะกั่ว-สังกะสีอีกครั้ง ตั้งเป้าเริ่มการผลิตเชิงพาณิชย์ภายในสิ้นปี 2569
Bunker Hill Mining ประกาศเมื่อวันที่ 1 กันยายนว่าเหมืองตะกั่ว-สังกะสี Bunker Hill ในรัฐไอดาโฮ สหรัฐอเมริกา ผลิตหัวแร่ตะกั่วและสังกะสีชุดแรกได้เมื่อปลายเดือนมิถุนายน 2026 ปัจจุบันการดำเนินงานอยู่ระหว่างการเพิ่มกำลังการผลิต พร้อมกับการปรับปรุงประสิทธิภาพการทำเหมืองใต้ดินและการแปรรูปอย่างต่อเนื่อง โรงแต่งแร่มีกำลังการผลิตออกแบบ 1,800 ตันต่อวัน โดยมีแผนผลผลิตรวมต่อปีประมาณ 85,000 ตันของหัวแร่สังกะสีและหัวแร่ตะกั่วที่มีแร่เงินเป็นส่วนประกอบ บริษัทมีแผนเสริมเงินทุนหมุนเวียนผ่านวงเงินสินเชื่อสำรองและข้อตกลงการรับชำระล่วงหน้าสำหรับหัวแร่ โดยตั้งเป้าเข้าสู่การผลิตเชิงพาณิชย์เต็มรูปแบบภายในสิ้นปี 2026 SMM คาดการณ์ผลผลิตของเหมืองในปี 2026 ไว้ที่ประมาณ 25,000 ตันของสังกะสีในหัวแร่ และ 10,000–15,000 ตันของตะกั่วในหัวแร่ โดยคิดบนฐานปริมาณโลหะ ในขณะเดียวกัน การเจาะสำรวจใต้ดินล่าสุดที่เขตแร่ Cate-8 ให้เกรดตัวอย่างสูงสุดที่ตะกั่ว 41.1% และสังกะสี 7.41% บริษัทกำลังประเมินความเป็นไปได้ในการนำเขตแร่นี้เข้าสู่แผนการทำเหมืองระยะใกล้ เมื่อการผลิตเพิ่มขึ้น คาดว่าเหมืองจะช่วยเพิ่มอุปทานตะกั่วและสังกะสีให้กับอเมริกาเหนือ
6 ชั่วโมงที่แล้ว
ACG ขยายโครงการเกดิคเทเปซัลไฟด์ผลิตคอปเปอร์และซิงก์คอนเซนเทรตครั้งแรก ตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2569
10 ชั่วโมงที่แล้ว
ACG ขยายโครงการเกดิคเทเปซัลไฟด์ผลิตคอปเปอร์และซิงก์คอนเซนเทรตครั้งแรก ตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2569
อ่านเพิ่มเติม
ACG ขยายโครงการเกดิคเทเปซัลไฟด์ผลิตคอปเปอร์และซิงก์คอนเซนเทรตครั้งแรก ตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2569
ACG ขยายโครงการเกดิคเทเปซัลไฟด์ผลิตคอปเปอร์และซิงก์คอนเซนเทรตครั้งแรก ตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2569
ACG Metals ประกาศเมื่อวันที่ 1 กันยายนว่าเหมือง Gediktepe ในตุรกีผลิตคอปเปอร์คอนเซนเทรตชุดแรกได้เมื่อวันที่ 31 สิงหาคม นับเป็นจุดเริ่มต้นของช่วงเพิ่มกำลังการผลิต บริษัทจะค่อย ๆ เพิ่มปริมาณการป้อนแร่และปรับปรุงประสิทธิภาพโรงงาน โดยตั้งเป้าเดินเครื่องเต็มกำลังภายในสิ้นปี 2026 เป้าหมายการผลิตต่อปีในสภาวะคงที่ของ Gediktepe อยู่ที่ 20,000–25,000 ตันทองแดงเทียบเท่า ประกาศฉบับเต็มยังยืนยันว่าเหมืองผลิตซิงก์คอนเซนเทรตชุดแรกได้ในเดือนสิงหาคม 2026 แม้จะไม่เปิดเผยวันที่แน่ชัดและปริมาณ SMM ประเมินว่าการผลิตซิงก์ในคอนเซนเทรตของเหมืองอยู่ที่ประมาณ 10,000–15,000 ตันของปริมาณโลหะสังกะสีในปี 2026
10 ชั่วโมงที่แล้ว
ข้อมูล: ความเคลื่อนไหวตลาด SHFE, DCE (2 ก.ย.)
13 ชั่วโมงที่แล้ว
ข้อมูล: ความเคลื่อนไหวตลาด SHFE, DCE (2 ก.ย.)
อ่านเพิ่มเติม
ข้อมูล: ความเคลื่อนไหวตลาด SHFE, DCE (2 ก.ย.)
ข้อมูล: ความเคลื่อนไหวตลาด SHFE, DCE (2 ก.ย.)
ตารางต่อไปนี้แสดงความเคลื่อนไหวของราคาโลหะกลุ่มเหล็กและอโลหะในตลาด SHFE และ DCE ณ วันที่ 2 กันยายน 2569
13 ชั่วโมงที่แล้ว
Monthly operating rate at China galvanising plants - Shanghai Metals Market (SMM)