SMM Analysis: The Latest Aluminum Operation Status and Subsequent Forecast in Yunnan Province

เผยแพร่แล้ว: Nov 29, 2023 13:37
แหล่งที่มา: SMM
As Yunnan Province entered the dry season in early November, the power supply became tense, and local industrial electricity users reduced production to varying degrees, among which local aluminum smelters were subject to energy consumption management and production cuts during the dry season in the winter of 2023. As of now, four local aluminum smelters have basically completed the production reduction.

SHANGHAI, November 29 (SMM) –
As Yunnan Province entered the dry season in early November, the power supply became tense, and local industrial electricity users reduced production to varying degrees, among which local aluminum smelters were subject to energy consumption management and production cuts during the dry season in the winter of 2023. As of now, four local aluminum smelters have basically completed the production reduction.
A total production capacity of about 1.17 million mt has been cut, which is basically in line with the requirements at the beginning of the month, without major adjustments. The determination of aluminum production reduction in Yunnan Province this winter is slightly different from previous years. In the past, smelters were basically required to reduce the same amount of capacity. However, considering smelters’ aluminum alloying ratio, the local government and the power department tried to ensure the supply of aluminum liquid to downstream aluminium processing companies this winter. Hence, smelters with a higher proportion of ingots are subject to bigger production cuts, with reduction ranging from 10% to 40%. This new approach of production reduction will undoubtedly promote the extension of the local aluminum industry chain in Yunnan Province. According to SMM, in Yunnan Province, aluminum’s total operating capacity in October was about 5.65 million mt, and the aluminum-liquid alloying ratio was about 61%. After completing the production reduction, companies’ aluminum-liquid alloying ratio is expected to increase to about 77%, and the monthly aluminum ingot production affected is about 97,500 mt.
SMM brief review: In recent years, aluminum production reduction caused by tight power supply in Yunnan Province during the dry season have occurred repeatedly. Moreover, in the transition period from the dry season to the wet season in the past two years, aluminum companies experienced two rounds of production reduction. Given tight power supply, there are many rumors in the market that aluminum companies may once again face a second round of production cuts this winter. SMM surveyed many local aluminum smelters, who reported that they have not received notice on the second round of production reduction. In the short term, they may mainly maintain the current operation. Let’s make a bold prediction based on power supply and demand. Currently, Yunnan’s aluminum operating production capacity has dropped to around 4.48 million mt, an increase of about 11% YoY. In the winter of 2021-2022, electricity consumption by aluminium industry in Yunnan Province accounted for about 18% of the province's total power generation. According to the proportion above, during the transition period from the dry season to the sub-wet season (from December 2023 to May 2024), in order to maintain the current aluminum operating production capacity of 4.48 million mt in Yunnan Province, power generation needs to increase over 15% YoY. Whether such a high growth rate can be achieved is in great doubt. According to the latest data released by Yunnan Province, in October, Yunnan's industrial power generation above designated size was 40.191 billion kWh, an increase of 17.2%. However, no industrial power cuts occurred in Yunnan in October thanks to improved water supply. The current water level in Yunnan's mainstream water stations is slightly higher YoY. Hydropower generation may maintain YoY growth in the short term, while since the dry season spans a large period, and from January to February each year is the peak and valley time period of hydropower generation in Yunnan Province. The conditions above make power supply unpredictable in the future. However, wind, photovoltaic and thermal power generation in Yunnan Province significantly increased YoY in 2023. It is expected that the power supply may increase by over 10% during the transition period from dry to wet season this year and next, thereby easing expectation for local industrial power shortages. SMM will follow up on the power supply and demand in Yunnan.

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
อุปทานบิลเล็ตอะลูมิเนียมของจีน: เดือนกรกฎาคมขยายแนวโน้มขาขึ้นที่ขับเคลื่อนด้วยแรงเฉื่อย; คาดว่าจะย่อตัวลงจากระดับสูงในเดือนสิงหาคม
2 ชั่วโมงที่แล้ว
อุปทานบิลเล็ตอะลูมิเนียมของจีน: เดือนกรกฎาคมขยายแนวโน้มขาขึ้นที่ขับเคลื่อนด้วยแรงเฉื่อย; คาดว่าจะย่อตัวลงจากระดับสูงในเดือนสิงหาคม
อ่านเพิ่มเติม
อุปทานบิลเล็ตอะลูมิเนียมของจีน: เดือนกรกฎาคมขยายแนวโน้มขาขึ้นที่ขับเคลื่อนด้วยแรงเฉื่อย; คาดว่าจะย่อตัวลงจากระดับสูงในเดือนสิงหาคม
อุปทานบิลเล็ตอะลูมิเนียมของจีน: เดือนกรกฎาคมขยายแนวโน้มขาขึ้นที่ขับเคลื่อนด้วยแรงเฉื่อย; คาดว่าจะย่อตัวลงจากระดับสูงในเดือนสิงหาคม
ตลาดบิลเล็ตอะลูมิเนียม SMM: ในเดือนกรกฎาคม อัตราการเดินเครื่องของบิลเล็ตอะลูมิเนียมเพิ่มขึ้น 1.1 จุดเปอร์เซ็นต์จากเดือนก่อนหน้าเป็น 58.3% และเพิ่มขึ้นอย่างมาก 5.2 จุดเปอร์เซ็นต์เมื่อเทียบกับปีก่อนหน้า โดยได้รับแรงหนุนจากผลการดำเนินงานที่แข็งแกร่งของค่าธรรมเนียมการแปรรูปบิลเล็ตอะลูมิเนียมในไตรมาส 2...
2 ชั่วโมงที่แล้ว
แผ่นดินไหวขนาด 7.7 ในอินโดนีเซียส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างน้อย โดยแรงสั่นสะเทือนแทบเป็นศูนย์
10 ชั่วโมงที่แล้ว
แผ่นดินไหวขนาด 7.7 ในอินโดนีเซียส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างน้อย โดยแรงสั่นสะเทือนแทบเป็นศูนย์
อ่านเพิ่มเติม
แผ่นดินไหวขนาด 7.7 ในอินโดนีเซียส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างน้อย โดยแรงสั่นสะเทือนแทบเป็นศูนย์
แผ่นดินไหวขนาด 7.7 ในอินโดนีเซียส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างน้อย โดยแรงสั่นสะเทือนแทบเป็นศูนย์
ข้อเสนอแนะการติดตาม SMM: แผ่นดินไหวขนาด 7.7 บนเกาะฟลอเรส ประเทศอินโดนีเซีย ส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างจำกัด ในด้านการกระจายกำลังการผลิต บอกไซต์ อะลูมินา และกำลังการผลิตอะลูมิเนียมส่วนใหญ่กระจุกตัวอยู่ทางตะวันตกของอินโดนีเซีย โดยทั่วไปอยู่ห่างจากศูนย์กลางแผ่นดินไหวมากกว่า 1,400 กม.; แม้แต่โรงถลุงอะลูมิเนียมที่ใกล้ที่สุด—Sulawesi Morowali Huachin Aluminum—ก็อยู่ห่างราว 624 กม. ซึ่งยังอยู่นอกระยะความเสียหาย 300 กม. เมื่อประกอบกับความสูงคลื่นสึนามิต่ำกว่า 0.4 เมตร แรงกระแทกด้านอุปทานจริงแทบเป็นศูนย์ ด้านราคา อาจสะท้อนแรงกระเพื่อมเชิงอารมณ์ระยะสั้นเพียง 0–1% มากที่สุด ซึ่งคาดว่าจะคลี่คลายภายใน 1–3 วัน โดยไม่เปลี่ยนแนวโน้มระยะกลาง
10 ชั่วโมงที่แล้ว
ดีทีไอฟิลิปปินส์วางแผนบังคับรับรองผลิตภัณฑ์อะลูมิเนียม เพื่อการันตีมาตรฐานคุณภาพและความปลอดภัย
22 ชั่วโมงที่แล้ว
ดีทีไอฟิลิปปินส์วางแผนบังคับรับรองผลิตภัณฑ์อะลูมิเนียม เพื่อการันตีมาตรฐานคุณภาพและความปลอดภัย
อ่านเพิ่มเติม
ดีทีไอฟิลิปปินส์วางแผนบังคับรับรองผลิตภัณฑ์อะลูมิเนียม เพื่อการันตีมาตรฐานคุณภาพและความปลอดภัย
ดีทีไอฟิลิปปินส์วางแผนบังคับรับรองผลิตภัณฑ์อะลูมิเนียม เพื่อการันตีมาตรฐานคุณภาพและความปลอดภัย
ตามรายงานของสื่อฟิลิปปินส์เมื่อวันที่ 12 กระทรวงการค้าและอุตสาหกรรมฟิลิปปินส์ (DTI) มีแผนผลักดันการจัดตั้งโครงการรับรองภาคบังคับสำหรับผลิตภัณฑ์อะลูมิเนียม ซึ่งกำหนดให้ผู้ประกอบการผลิตในฟิลิปปินส์ทั้งในประเทศและต่างชาติต้องขอใบอนุญาตด้านคุณภาพและความปลอดภัยอย่างเป็นทางการของฟิลิปปินส์ล่วงหน้า และใช้แนวทางการรับรองแบบ “หนึ่งโรงงาน หนึ่งใบรับรอง”
22 ชั่วโมงที่แล้ว