SMM Analysis And Forecast Of Impact Of The 2023-2024 Heating Season On Alumina Industry

เผยแพร่แล้ว: Oct 18, 2023 09:43 (GMT+8)
แหล่งที่มา: SMM
According to SMM research, in Shandong, affected by emission reduction measures against an orange alert for heavy air pollution, some alumina refineries planned to reduce the operation of roasters by about 50% from October 14 to October 22.

According to SMM research, in Shandong, affected by emission reduction measures against an orange alert for heavy air pollution, some alumina refineries planned to reduce the operation of roasters by about 50% from October 14 to October 22. With forthcoming heating season, impact of emission reduction and production restrictions on alumina industry for Q4 will be closely watched.

According to SMM statistics, there are a total of 22 alumina refineries who are located within the "2+26" cities of Beijing-Tianjin-Hebei and surrounding areas plus Fenwei Plain, involving three major alumina production provinces, namely Shanxi, Henan, and Shandong. Installed alumina capacity aggregated 58.45 million mt/year, accounting for 58.5% of China's total installed annual capacity, and capacity in operation was 47.72 million mt/year, accounting for 58.3% of China's total annual capacity in operation.

(1) Shanxi Province: Installed alumina capacity of 18.6 million mt/year mainly spread over Luliang, Yuncheng and Jinzhong. At present, Shanxin province boasted two alumina refineries rated A-level performance enterprises in Xiaoyi City and Yuncheng City, and an alumina refinery rated B-level enterprise in Xinzhou City.

(2) Henan Province: Installed alumina capacity of 11.85 million mt/year, mainly concentrated in Sanmenxia, Jiaozuo, Luoyang and Zhengzhou. The current operating rate of the capacity involved was a paltry 76.1%. If it is still calculated based on the installed production lines, production halts are expected to be similar to last year. According to SMM research, no alumina refineries in Henan province entered the list of performance companies in the province's key industries with heavy pollution weather in 2022.

(3) Shandong Province: Installed alumina capacity of 28 million mt/year, mainly concentrated in Binzhou, Liaocheng and Zibo. Currently, Shandong province boasted only one alumina refinery rated A-level performance enterprises in Liaocheng City. Documents from cities had specific requirements for production cuts and halts, which mainly involved alumina roasting process, in response to different weather warnings (red, orange, yellow), and made restrictions on transportations.

Overall, current domestic alumina market firmed up. Tight ore supply kept operating rate of alumina in Shanxi and Henan low. In October, liquid caustic soda prices at alumina refineries in Shanxi and Henan hiked, putting a lid on alumina production expansion to a certain extent. Under such circumstance, alumina spot supply stayed tight. SMM predicts that alumina market in Shanxi and Henan may further tighten amid heating season fallout. For Shandong-based alumina refineries with stable operating rates, most of them completed environmental protection transformation, and many policies made requirements for roasting process. Therefore, the impact on actual output was relatively limited. Overall, production restriction policy in autumn and winter heating season will linger. And actual implementation of the policy will still need to be monitored. SMM will keep monitoring the situation.

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
6 ชั่วโมงที่แล้ว
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
อ่านเพิ่มเติม
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
เมื่อวันที่ 20 กันยายน โรงรีดหยาบแผ่นหนาของโครงการผลิตอัจฉริยะวัสดุใหม่ฐานอะลูมิเนียมกำลังการผลิต 720,000 ตันต่อปี ของบริษัท เหอหนาน อี้รุ่ย นิวแมทีเรียลส์ เทคโนโลยี จำกัด ได้เริ่มเดินเครื่องผลิตอย่างเป็นทางการ โครงการนี้มีมูลค่าการลงทุนรวม 1.5 พันล้านหยวน โดยใช้พื้นที่โรงงานเดิมในการสร้างสายการรีดร้อนต่อเนื่อง “1+4” ระดับแนวหน้าของโลก พร้อมอุปกรณ์แปรรูปอะลูมิเนียมชั้นนำในอุตสาหกรรม เช่น เตาเผาแบบผลัก โครงการยังได้สร้างระบบอินเทอร์เน็ตอุตสาหกรรมที่สามารถตรวจสอบแบบเรียลไทม์และควบคุมแบบพลวัตของพารามิเตอร์การผลิตหลัก เช่น แรงรีดและอุณหภูมิ ซึ่งช่วยรับประกันคุณภาพที่เสถียรของผลิตภัณฑ์อะลูมิเนียมระดับไฮเอนด์ และเพิ่มส่วนแบ่งตลาดของผลิตภัณฑ์มูลค่าเพิ่มสูงอย่างต่อเนื่อง
6 ชั่วโมงที่แล้ว
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
6 ชั่วโมงที่แล้ว
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
อ่านเพิ่มเติม
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
กินีมีแผนขยายความร่วมมือกับเกลนคอร์ไปสู่การกลั่นอะลูมินา พลังงาน ทองคำ และโลหะพื้นฐาน โดยมุ่งเพิ่มรายได้จากเหมืองแร่ ส่งเสริมการแปรรูปในประเทศและการพัฒนาอุตสาหกรรมจากทรัพยากรแร่ และเสริมสร้างความร่วมมือกับตลาดและบริษัทเหมืองแร่ระหว่างประเทศในจีน ตะวันออกกลาง และภูมิภาคอื่น ๆ
6 ชั่วโมงที่แล้ว
ติงเฟิง อลูมิเนียม เริ่มก่อสร้างเฟส 2 ตั้งเป้ากำลังการผลิตปีละ 200,000 ตันในกัมพูชา
6 ชั่วโมงที่แล้ว
ติงเฟิง อลูมิเนียม เริ่มก่อสร้างเฟส 2 ตั้งเป้ากำลังการผลิตปีละ 200,000 ตันในกัมพูชา
อ่านเพิ่มเติม
ติงเฟิง อลูมิเนียม เริ่มก่อสร้างเฟส 2 ตั้งเป้ากำลังการผลิตปีละ 200,000 ตันในกัมพูชา
ติงเฟิง อลูมิเนียม เริ่มก่อสร้างเฟส 2 ตั้งเป้ากำลังการผลิตปีละ 200,000 ตันในกัมพูชา
เมื่อวันที่ 21 กันยายน พิธีวางศิลาฤกษ์เฟส 2 (โครงการ A3) ของบริษัท Dingfeng Aluminum Manufacturing (Cambodia) Co., Ltd. ซึ่งเป็นบริษัทในเครือ Dihang Group ได้จัดขึ้น ตั้งอยู่ในเขตเศรษฐกิจพิเศษถนนหมายเลข 6 จังหวัดกำปงจาม ประเทศกัมพูชา Dingfeng Aluminum ดำเนินธุรกิจหลักด้านการวิจัยและพัฒนาการผลิตแท่งอะลูมิเนียมอัลลอยด์ระดับไฮเอนด์ โพรไฟล์อะลูมิเนียมระดับไฮเอนด์ และผลิตภัณฑ์สนับสนุนยานยนต์พลังงานใหม่ พร้อมด้วยกระบวนการผลิตและอุปกรณ์ครบวงจรครอบคลุมการหลอมและการหล่อ การรีดขึ้นรูป การชุบอโนไดซ์ การแปรรูปเชิงลึก การกลึงความละเอียดสูง และการปรับสภาพพื้นผิว เมื่อเฟส 2 เดินเครื่องเต็มกำลัง กำลังการผลิตต่อปีจะสูงถึง 200,000 ตัน มูลค่าผลผลิตต่อปีสูงถึง 700 ล้านดอลลาร์สหรัฐ เฟส 2 (โครงการ A3) มีแผนประกอบด้วยโรงงานแปรรูปยานยนต์พลังงานใหม่ขนาด 24,340 ตร.ม. (อาคารโครงสร้างเหล็กชั้นเดียว) โรงงานรีดขึ้นรูปขนาด 15,291 ตร.ม. และสิ่งอำนวยความสะดวกสนับสนุน เช่น อาคารสำนักงาน ป้อมยาม และห้องจ่ายไฟฟ้า
6 ชั่วโมงที่แล้ว