SMM Aluminium Ingot and Billet Social Inventories in China as of January 12

เผยแพร่แล้ว: Jan 12, 2023 16:30 (GMT+8)
แหล่งที่มา: SMM
SHANGHAI, Jan 12 (SMM) - Aluminium ingots: The aluminium ingot social inventories across China’s eight major markets stood at 642,000 mt as of January 12, up 66,000 mt from a week ago and 149,000 mt from the end of December.

SHANGHAI, Jan 12 (SMM) - Aluminium ingots: The aluminium ingot social inventories across China’s eight major markets stood at 642,000 mt as of January 12, up 66,000 mt from a week ago and 149,000 mt from the end of December. The figure was 83,000 mt less than the same period last year, though. Th inventories were still in a seasonal accumulation cycle, mostly contributed by Wuxi, Foshan, and Gongyi. Inventories in the three regions added 55,000 mt on a weekly basis. It is expected that the total inventories will grow further next week as more cargoes will arrive. Downstream consumption in Gongyi was muted as the CNY holiday is around the corner, keeping the spot discounts at highs. Transactions in east and south China were relatively brisk as optimism over the post-holiday market outlook drove traders to stock up, even though some downstream producers were already shut down for the CNY holiday. On the whole, trading activities in the spot market will dwindle with more downstream producers taking the CNY holiday in advance. The magnitude of inventory accumulation during the holiday deserves close attention. 

Aluminium billet: The domestic aluminium billet social inventory extended the increase this week and stood at 95,000 mt as of January 12, up 15,100 mt from week ago. Except for Changzhou, all the other regions saw inventory accumulation. The inventory in Foshan added 10,900 mt to 45,400 mt, driven by high shipments from south-west China and rapidly cooling demand after downstream producers took an early CNY break. The inventories in east China maintained a seasonal upward trend, and lower prices barely attracted buyers. Aluminium billet output cuts are expected to expand in January. Most of the small and medium-sized aluminium extruders were shut down before January 10 for the CNY holiday, leaving only a small number of large extruders still in operation to digest their orders. The inventories in east and south China are both expected to climb further. And the inventories of billet plants and downstream enterprises will also gradually pile up.


 

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
ข้อเสนอพรีเมียม MJP CIF ไตรมาส 4 ปี 26 ฉบับปรับปรุงโดย RTA ที่ 280 ดอลลาร์สหรัฐฯ ต่อเมตริกตัน
3 ชั่วโมงที่แล้ว
ข้อเสนอพรีเมียม MJP CIF ไตรมาส 4 ปี 26 ฉบับปรับปรุงโดย RTA ที่ 280 ดอลลาร์สหรัฐฯ ต่อเมตริกตัน
อ่านเพิ่มเติม
ข้อเสนอพรีเมียม MJP CIF ไตรมาส 4 ปี 26 ฉบับปรับปรุงโดย RTA ที่ 280 ดอลลาร์สหรัฐฯ ต่อเมตริกตัน
ข้อเสนอพรีเมียม MJP CIF ไตรมาส 4 ปี 26 ฉบับปรับปรุงโดย RTA ที่ 280 ดอลลาร์สหรัฐฯ ต่อเมตริกตัน
ข้อเสนอพรีเมียม MJP CIF ไตรมาส 4 ปี 26 ฉบับปรับปรุงโดย RTA ที่ 280 ดอลลาร์สหรัฐ/ตัน (ลดลงจาก 310 ดอลลาร์สหรัฐ/ตัน) มีผลถึงวันที่ 28 ก.ย. 2026
3 ชั่วโมงที่แล้ว
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
15 ชั่วโมงที่แล้ว
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
อ่านเพิ่มเติม
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
เมื่อวันที่ 20 กันยายน โรงรีดหยาบแผ่นหนาของโครงการผลิตอัจฉริยะวัสดุใหม่ฐานอะลูมิเนียมกำลังการผลิต 720,000 ตันต่อปี ของบริษัท เหอหนาน อี้รุ่ย นิวแมทีเรียลส์ เทคโนโลยี จำกัด ได้เริ่มเดินเครื่องผลิตอย่างเป็นทางการ โครงการนี้มีมูลค่าการลงทุนรวม 1.5 พันล้านหยวน โดยใช้พื้นที่โรงงานเดิมในการสร้างสายการรีดร้อนต่อเนื่อง “1+4” ระดับแนวหน้าของโลก พร้อมอุปกรณ์แปรรูปอะลูมิเนียมชั้นนำในอุตสาหกรรม เช่น เตาเผาแบบผลัก โครงการยังได้สร้างระบบอินเทอร์เน็ตอุตสาหกรรมที่สามารถตรวจสอบแบบเรียลไทม์และควบคุมแบบพลวัตของพารามิเตอร์การผลิตหลัก เช่น แรงรีดและอุณหภูมิ ซึ่งช่วยรับประกันคุณภาพที่เสถียรของผลิตภัณฑ์อะลูมิเนียมระดับไฮเอนด์ และเพิ่มส่วนแบ่งตลาดของผลิตภัณฑ์มูลค่าเพิ่มสูงอย่างต่อเนื่อง
15 ชั่วโมงที่แล้ว
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
15 ชั่วโมงที่แล้ว
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
อ่านเพิ่มเติม
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
กินีมีแผนขยายความร่วมมือกับเกลนคอร์ไปสู่การกลั่นอะลูมินา พลังงาน ทองคำ และโลหะพื้นฐาน โดยมุ่งเพิ่มรายได้จากเหมืองแร่ ส่งเสริมการแปรรูปในประเทศและการพัฒนาอุตสาหกรรมจากทรัพยากรแร่ และเสริมสร้างความร่วมมือกับตลาดและบริษัทเหมืองแร่ระหว่างประเทศในจีน ตะวันออกกลาง และภูมิภาคอื่น ๆ
15 ชั่วโมงที่แล้ว