Downstream Stocking in Aluminium Market Was Modest before the National Day Holiday, Post-Holiday Aluminium Ingot to Accumulate Significantly due to Longer Break by Small and Medium-Sized Downstream Enterprises

เผยแพร่แล้ว: Sep 30, 2022 10:56 (GMT+8)
แหล่งที่มา: SMM
SHANGHAI, Sep 30 (SMM) - According to SMM survey on the domestic major aluminium processing enterprises, their operating rates will vary during the National Day holiday, depending on their orders.

SHANGHAI, Sep 30 (SMM) - According to SMM survey on the domestic major aluminium processing enterprises, their operating rates will vary during the National Day holiday, depending on their orders. Most of the small and medium-sized enterprises will close for 3-7 days for the holiday, while larger ones will take a shorter or even no break.   In terms of sectors, enterprises in the aluminium plate/sheet, strip, foil and primary aluminium alloy sectors will maintain stable operations during the holiday, while those in the aluminium extrusion and secondary aluminium alloy sectors will generally take a break. Lower aluminium prices drove downstream enterprises to stock up ahead of the holiday, but most restocked only as needed. The aluminium ingot social inventories across China’s eight major markets totalled 619,000 mt as of September 29, a drop of 47,000 mt from a week ago and 33,000 mt from this Monday September 26. The figure was also 198,000 mt lower than a year ago and 57,000 mt less than that at the end of August. The domestic aluminium billet inventory dropped 26,000 mt from a week ago to 80,100 mt as of September 29.

Aluminium extrusion: Aluminium extruders will generally take a longer break during this year's National Day holiday than in previous years. Most of the non-production staff will have 5-7 days off, while production staff have 3-5 days off. Even several large aluminium extruders will be shut down completely during the week-long holiday. The main reason is falling orders from downstream customers. It’s worth noting that extruders whose customers are new energy vehicle manufacturers will maintain normal production during the holiday due to the booming NEV market. The pre-holiday stocking was limited and driven primarily by rigid demand. As a result, the shipments of aluminium billets recovered only slightly. 

Aluminium plate/sheet, strip and foil: The downstream demand has improved when compared with July-August due to the arrival of the peak season, but was much less strong than in the same period of previous years. Large enterprises will be able to produce normally during the holiday on the back of sufficient orders, while some small and medium-sized enterprises will take a 3-7 day break due to poor orders. Aluminium prices once fell below 18,000 yuan/mt, but then rebounded. Upcoming holiday and bullish sentiment on aluminium prices drove some enterprises to ramp up their purchases.  

Primary aluminium alloy: Affected by the pandemic, chip shortages, and economic downturn, primary aluminium alloy factories generally reported sluggish production and sales. However, the fact that most primary aluminium alloy enterprises are located adjacent to aluminium smelters or have self-supplied aluminium liquid for production means that shutting down for the holiday will cost them tremendously. Therefore, they would rather build up their inventory of finished products than stop their production during the holiday. 

Aluminium wire and cable: Most of the large aluminium wire and cable enterprises will maintain normal production during the holiday, except for a break by non-production stuff, hence they stocked up ahead of the holiday. In contrast, small and medium-sized enterprises will generally take 3-5 days of break due to insufficient orders. Small and medium-sized enterprises restocked only as needed due to bearish sentiment on post-holiday aluminium prices. 

Secondary aluminium alloy: Most of the secondary aluminium alloy plants will take a 3-4 day break, while the rest will be shut down for 0-7 days. Those who will produce non-stop during the holiday will slow down their production. Downstream die-casting enterprises mostly took a wait-and-see stance in response to limited orders and volatile aluminium prices. Secondary aluminium alloy plants did not stockpile too much due to significant market fluctuations and aluminium scrap shortages.  

As the demand in this year’s peak season is less strong than in previous years, the aluminium ingot and billet markets are likely to see greater accumulation of social inventory after this year’s National Day holiday. Due to expanding output cuts in Yunnan, the operating aluminium capacity in China had dropped to around 40.4 million mt at the end of September and the domestic daily average aluminium output is estimated to have fallen to around 110,000 mt. Considering the conversion rate of aluminium liquid and the transportation cycle, it is expected that the domestic aluminium ingot social inventory may reach around 700,000 mt after the holiday. Given the stable production of aluminium smelters and shorter production period of downstream enterprises, the aluminium ingot social inventory will accumulate. SMM data showed that the social inventory climbed to 862,000 mt after last year’s National Day holiday and saw a cumulative increase of 185,000 mt in October last year.   

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
กรีนแลนด์ไมนส์เพิ่มสัดส่วนการถือหุ้นใน AnorTech เสริมความอิสระของห่วงโซ่อุปทานอะลูมินาในสหรัฐฯ
19 นาทีที่แล้ว
กรีนแลนด์ไมนส์เพิ่มสัดส่วนการถือหุ้นใน AnorTech เสริมความอิสระของห่วงโซ่อุปทานอะลูมินาในสหรัฐฯ
อ่านเพิ่มเติม
กรีนแลนด์ไมนส์เพิ่มสัดส่วนการถือหุ้นใน AnorTech เสริมความอิสระของห่วงโซ่อุปทานอะลูมินาในสหรัฐฯ
กรีนแลนด์ไมนส์เพิ่มสัดส่วนการถือหุ้นใน AnorTech เสริมความอิสระของห่วงโซ่อุปทานอะลูมินาในสหรัฐฯ
บริษัทจดทะเบียน Greenland Mines ประกาศว่าได้ใช้สิทธิเต็มจำนวนในการเข้าซื้อหุ้นเพิ่มอีก 9.9% ใน AnorTech ผู้ผลิตอะนอร์โทไซต์ของแคนาดา ส่งผลให้สัดส่วนการถือหุ้นเพิ่มขึ้นเป็น 19.9% AnorTech เป็นเจ้าของโครงการ Gronne Bjerg ในกรีนแลนด์ และถือครองกรรมสิทธิ์กระบวนการที่อยู่ระหว่างการจดสิทธิบัตร ซึ่งสามารถผลิตอะลูมินาเกรดหลอมและอะลูมินาความบริสุทธิ์สูงจากอะนอร์โทไซต์ได้อย่างยั่งยืน โดยไม่ก่อให้เกิดกากแร่บอกไซต์ กระบวนการดังกล่าวยังให้ผลพลอยได้ที่จำหน่ายได้หลายชนิด เช่น ซิลิกาอสัณฐาน แคลเซียมซิลิเกต ซีเมนต์ทนไฟปลอด CO2 ซีเมนต์พิมพ์สามมิติ และตัวเร่งปฏิกิริยาจากอะลูมินา Greenland เชื่อว่าโครงการ Gronne Bjerg มีศักยภาพที่จะเป็นแหล่งวัตถุดิบสำหรับการผลิตอะลูมินาเกรดหลอมและอะลูมินาความบริสุทธิ์สูงของสหรัฐฯ ขณะที่การนำเข้าสุทธิของสหรัฐฯ ในปี 2025 คาดว่าตอบสนองการบริโภคอะลูมินาประมาณ 71% ประธาน Greenland นาย Bo Møller Stensgaard กล่าวว่าบริษัทมุ่งสร้างห่วงโซ่อุปทานจากกรีนแลนด์สู่สหรัฐฯ ที่สามารถดำเนินการได้โดยอิสระจากการกลั่นของจีน ช่วยให้เกิดการแปรรูป การผลิต และการสร้างมูลค่าในสหรัฐฯ มากขึ้น การเพิ่มสัดส่วนการถือหุ้นครั้งนี้ยังขยายฐานของ “ระเบียงโลหะสำคัญแอตแลนติกเหนือ” ให้กว้างขึ้น เป็นแหล่งทางเลือกที่มีศักยภาพสำหรับห่วงโซ่อุปทานอะลูมินาของสหรัฐฯ และสนับสนุนเป้าหมายการพึ่งพาตนเองด้านอุตสาหกรรมของสหรัฐฯ
19 นาทีที่แล้ว
โครงการวัสดุแบตเตอรี่ไฮเทคมูลค่า 400 ล้านดอลลาร์ของ Sichuan Jiuda Aluminum เริ่มก่อสร้างในก่วงหยวน
35 นาทีที่แล้ว
โครงการวัสดุแบตเตอรี่ไฮเทคมูลค่า 400 ล้านดอลลาร์ของ Sichuan Jiuda Aluminum เริ่มก่อสร้างในก่วงหยวน
อ่านเพิ่มเติม
โครงการวัสดุแบตเตอรี่ไฮเทคมูลค่า 400 ล้านดอลลาร์ของ Sichuan Jiuda Aluminum เริ่มก่อสร้างในก่วงหยวน
โครงการวัสดุแบตเตอรี่ไฮเทคมูลค่า 400 ล้านดอลลาร์ของ Sichuan Jiuda Aluminum เริ่มก่อสร้างในก่วงหยวน
เมื่อเร็วๆ นี้ โครงการวัสดุแบตเตอรี่ไฮเทคกำลังการผลิตปีละ 50,000 เมตริกตัน ซึ่งลงทุนโดยบริษัท Sichuan Jiuda Aluminum Co., Ltd. และก่อสร้างโดยบริษัท Gongyi Xingrui Construction Engineering Co., Ltd. ได้เริ่มก่อสร้างอย่างเป็นทางการในนิคมอุตสาหกรรมอะลูมิเนียมหยวนเจียป้า เขตพัฒนาเศรษฐกิจและเทคโนโลยีกว่างหยวน โครงการนี้มีมูลค่าการลงทุนรวม 400 ล้านหยวน ก่อสร้างบนที่ดินอุตสาหกรรมขององค์กรเอง ครอบคลุมพื้นที่ 25,073.89 ตร.ม. (รวมโรงงานหมายเลข 1 เดิม 7,873.89 ตร.ม. และที่ดินที่ขอเพิ่มใหม่ 17,200 ตร.ม.) ขอบเขตการก่อสร้างประกอบด้วย การก่อสร้างอาคารผลิตในโรงงานหมายเลข 1 ฝั่งตะวันตกตามแผน (ประเภท E สูง 1 ชั้น H=15 ม.) และพื้นที่โรงงานใหม่ ติดตั้งสายการผลิตฟอยล์อะลูมิเนียมแบตเตอรี่ความแม่นยำสูง 5 สาย (แต่ละสายมีกำลังการผลิตฟอยล์อะลูมิเนียมแบตเตอรี่ความแม่นยำสูงปีละ 10,000 เมตริกตัน) พร้อมทั้งสร้างกำลังการผลิตแผ่นคอมโพสิตอะลูมิเนียม-ทองแดงปีละ 6,000 เมตริกตัน และฟอยล์คอมโพสิตอะลูมิเนียม-ทองแดงปีละ 2,400 เมตริกตัน รวมถึงสิ่งอำนวยความสะดวกการผลิตเสริม เช่น การตัดม้วน การตัดละเอียด และการอบอ่อน ตลอดจนระบบสาธารณูปโภค เช่น การตรวจสอบคุณภาพ ระบบน้ำหมุนเวียน และสถานีเครื่องอัดอากาศ โครงการมีแผนแล้วเสร็จและเริ่มเดินเครื่องผลิตในเดือนตุลาคม 2569 เมื่อเดินเครื่องเต็มกำลังการผลิต คาดว่าจะสร้างมูลค่าผลผลิตปีละ 1.3 พันล้านหยวน นำส่งภาษี 90.328 ล้านหยวน และสร้างการจ้างงานกว่า 90 อัตรา หลังแล้วเสร็จและเริ่มเดินเครื่อง โครงการนี้จะช่วยปรับปรุงผังห่วงโซ่อุตสาหกรรมวัสดุใหม่สำหรับแบตเตอรี่ลิเทียมให้สมบูรณ์ยิ่งขึ้น เพิ่มขีดความสามารถของอุตสาหกรรมพลังงานใหม่ในภูมิภาค และสนับสนุนการพัฒนาคุณภาพสูงของอุตสาหกรรมสีเขียวในท้องถิ่น
35 นาทีที่แล้ว
INALUM ตั้งเป้า FID สำหรับ SGAR เฟส 2 และโรงถลุงอะลูมิเนียมในเมมปาวาห์ เงินลงทุนกว่า 3.5 พันล้านดอลลาร์สหรัฐ
50 นาทีที่แล้ว
INALUM ตั้งเป้า FID สำหรับ SGAR เฟส 2 และโรงถลุงอะลูมิเนียมในเมมปาวาห์ เงินลงทุนกว่า 3.5 พันล้านดอลลาร์สหรัฐ
อ่านเพิ่มเติม
INALUM ตั้งเป้า FID สำหรับ SGAR เฟส 2 และโรงถลุงอะลูมิเนียมในเมมปาวาห์ เงินลงทุนกว่า 3.5 พันล้านดอลลาร์สหรัฐ
INALUM ตั้งเป้า FID สำหรับ SGAR เฟส 2 และโรงถลุงอะลูมิเนียมในเมมปาวาห์ เงินลงทุนกว่า 3.5 พันล้านดอลลาร์สหรัฐ
[ข่าวด่วน SMM อะลูมิเนียม] INALUM ตั้งเป้าการตัดสินใจลงทุนขั้นสุดท้ายสำหรับ SGAR ระยะที่ 2 และโรงถลุงอะลูมิเนียมกำลังการผลิต 600,000 ตันต่อปีในเมมปาวาห์ PT INALUM ผู้ผลิตอะลูมิเนียมรัฐวิสาหกิจของอินโดนีเซีย ตั้งเป้าการตัดสินใจลงทุนขั้นสุดท้าย (FID) สำหรับโรงกลั่นอะลูมินาเกรดถลุง (SGAR) แห่งที่สองและโรงถลุงอะลูมิเนียมปฐมภูมิแบบครบวงจรในเมมปาวาห์ กาลีมันตันตะวันตก ระหว่างสัปดาห์วันที่ 5–11 ตุลาคม Arif Haendra ผู้อำนวยการฝ่ายกลยุทธ์องค์กร การพัฒนาธุรกิจ และพาณิชย์ของ INALUM ระบุเมื่อวันที่ 6 ตุลาคมว่าการศึกษาความเป็นไปได้ระดับแบงก์ได้เสร็จสิ้นแล้ว มูลค่าการลงทุนรวมประมาณการไว้มากกว่า 60 ล้านล้านรูเปียห์ (ประมาณ 3.5–3.7 พันล้านดอลลาร์สหรัฐ) ประกอบด้วย 15–18 ล้านล้านรูเปียห์สำหรับ SGAR ระยะที่ 2 และ 2.7 พันล้านดอลลาร์สหรัฐสำหรับโรงถลุงอะลูมิเนียม
50 นาทีที่แล้ว