Aluminium Prices Supported by Potential Production Cuts and Rising Cost

เผยแพร่แล้ว: Sep 20, 2022 10:33 (GMT+8)
Though the rumoured production cuts on aluminium production in Yunnan province is casting a greater impact on the supply side, the actual scale of production restrictions is still undetermined, while the demand side has not shown signs of improvement either.

SHANGHAI, Sep 20 (SMM) - Though the rumoured production cuts on aluminium production in Yunnan province is casting a greater impact on the supply side, the actual scale of production restrictions is still undetermined, while the demand side has not shown signs of improvement either. The most-traded aluminium contract kept falling yesterday September 19, closing the day session with a loss of 1.14% at 18,710 yuan/mt.

At present, news of production cuts as a result of power rationing in Yunnan has fermented with a 10% reduction nailed in the first stage, while it is rumoured that the production curtailment could expand in the future. Nonetheless, the follow-up decisions have not been heard yet, while the sentiment experienced greater shock.

Meanwhile, the pandemic situation in Sichuan province has eased, and closed smelters are resuming the production in an orderly manner. According to SMM research, Sichuan Qixingxing Aluminium Plant started to resume the production on September 5, and is planned to power on by September 20, with the production fully resumed by November 5. Resuming production in Sichuan slightly weighed on aluminium prices, but the pressure is insignificant in light of the slow progress in production resumption.

Though the supply pressure is not great, the demand side is sluggish as well. Real estate housing completions rebounded in August, but the overall performance is still muted. The average weekly operating rate of top-tier downstream fabricators rose merely 0.4 percentage point from a week ago to 66.4% as of September 15.  The traditional seasonal high expected in September and October is yet to pay off.

In addition, domestic aluminium ingot inventory has remained low. According to SMM statistics, as of September 19, the domestic social inventory of aluminium was 685,000 mt, an increase of 10,000 mt from the previous Thursday and a decrease of 11,000 mt from the first trading day post the Mid-Autumn Festival. The reading recorded a loss of 104,000 mt from the same period last year, but a gain of 8,000 mt compared with the end of August. The overall inventory has remained low at around 680,000 mt.

The spot price of SMM A00 aluminium ingot stood at 18,750-18,790 yuan/mt as of September 19, with an average of 18,770 yuan/mt, down 100 yuan/mt from the previous Monday.

Transactions in the spot market weakened. SMM aluminium price in Foshan showed a discount of 50 yuan/mt over the SHFE 2210 contract, and the average spot price recorded 18,770 yuan/mt, down 100 yuan/mt from the previous trading day. The spread between prices in Guangdong and Shanghai narrowed to 0 yuan/mt. In the second trading session, the cargo holders were more active in selling as aluminium futures prices fell, and the spot discounts expanded. The traded prices were in premiums of (100) - 50 yuan/mt over SMM aluminium price in Foshan, or in the range of 18,650-18,780 yuan/mt.

Though both futures and spot prices fell and cost support still existed. 

Also according to SMM, the weighted full average cost of domestic aluminium in August was about 17,576 yuan/mt, up 228 yuan/mt MoM due to rising electricity cost.

In general, aluminium prices are still supported by the expected production cuts and rising cost, and will edge higher if the demand picks up. However, it is necessary to stay alert to the macro risks brought about by overseas interest rate hikes.

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
สต๊อกบอกไซต์ในท่าเรือภายในประเทศลดลง 30,000 เมตริกตันเมื่อสัปดาห์ที่แล้ว
22 ชั่วโมงที่แล้ว
สต๊อกบอกไซต์ในท่าเรือภายในประเทศลดลง 30,000 เมตริกตันเมื่อสัปดาห์ที่แล้ว
อ่านเพิ่มเติม
สต๊อกบอกไซต์ในท่าเรือภายในประเทศลดลง 30,000 เมตริกตันเมื่อสัปดาห์ที่แล้ว
สต๊อกบอกไซต์ในท่าเรือภายในประเทศลดลง 30,000 เมตริกตันเมื่อสัปดาห์ที่แล้ว
【SMM สต็อกบอกไซต์นำเข้าที่ท่าเรือ】ตามสถิติของ SMM ณ วันที่ 23 ตุลาคม สต็อกบอกไซต์รวมที่ท่าเรือในประเทศสิบแห่งลดลง 30,000 ตันจากสัปดาห์ก่อน
22 ชั่วโมงที่แล้ว
30,000 เมตริกตัน อลูมินา ซื้อขายที่ 361 ดอลลาร์สหรัฐ/เมตริกตัน FOB อินเดีย สำหรับการขนส่งเดือนพฤศจิกายน
22 ชั่วโมงที่แล้ว
30,000 เมตริกตัน อลูมินา ซื้อขายที่ 361 ดอลลาร์สหรัฐ/เมตริกตัน FOB อินเดีย สำหรับการขนส่งเดือนพฤศจิกายน
อ่านเพิ่มเติม
30,000 เมตริกตัน อลูมินา ซื้อขายที่ 361 ดอลลาร์สหรัฐ/เมตริกตัน FOB อินเดีย สำหรับการขนส่งเดือนพฤศจิกายน
30,000 เมตริกตัน อลูมินา ซื้อขายที่ 361 ดอลลาร์สหรัฐ/เมตริกตัน FOB อินเดีย สำหรับการขนส่งเดือนพฤศจิกายน
ธุรกรรมอะลูมินา: เมื่อวันที่ 23 ตุลาคม 2569 มีการซื้อขายอะลูมินา 30,000 เมตริกตัน ที่ราคา 361 ดอลลาร์สหรัฐต่อเมตริกตัน FOB อินเดีย สำหรับการขนส่งเดือนพฤศจิกายน
22 ชั่วโมงที่แล้ว
【SMM ข่าวด่วนอลูมิเนียม】ความต้องการอลูมิเนียม FRP ซีรีส์ 5 ในอเมริกาขยายตัว การบริโภคในอเมริกาเหนือจะแตะ 2.23 ล้านตัน
23 Oct 2026 18:39 (GMT+8)
【SMM ข่าวด่วนอลูมิเนียม】ความต้องการอลูมิเนียม FRP ซีรีส์ 5 ในอเมริกาขยายตัว การบริโภคในอเมริกาเหนือจะแตะ 2.23 ล้านตัน
อ่านเพิ่มเติม
【SMM ข่าวด่วนอลูมิเนียม】ความต้องการอลูมิเนียม FRP ซีรีส์ 5 ในอเมริกาขยายตัว การบริโภคในอเมริกาเหนือจะแตะ 2.23 ล้านตัน
【SMM ข่าวด่วนอลูมิเนียม】ความต้องการอลูมิเนียม FRP ซีรีส์ 5 ในอเมริกาขยายตัว การบริโภคในอเมริกาเหนือจะแตะ 2.23 ล้านตัน
ความต้องการผลิตภัณฑ์อะลูมิเนียมรีดแบนซีรีส์ 5xxx ทั่วทั้งทวีปอเมริกาคาดว่าจะเติบโต โดยได้แรงหนุนจากการลดน้ำหนักยานยนต์ การต่อเรือ และการลงทุนด้านโครงสร้างพื้นฐาน การบริโภคในอเมริกาเหนือคาดว่าจะเพิ่มขึ้นจาก 1.79 ล้านตันในปี 2025 เป็น 2.23 ล้านตันภายในปี 2032 คิดเป็นการเติบโตประมาณ 24.6% โดยความต้องการจะแตะระดับประมาณ 2.10 ล้านตันภายในปี 2030 การเติบโตจะขับเคลื่อนโดยการใช้งานในภาคยานยนต์และการเดินเรือของสหรัฐฯ ควบคู่กับอุตสาหกรรมอะลูมิเนียมคาร์บอนต่ำของแคนาดา และฐานการผลิตยานยนต์ที่ขยายตัวของเม็กซิโก ขณะเดียวกัน การบริโภคในอเมริกาใต้คาดว่าจะเพิ่มขึ้นจาก 502,710 ตันในปี 2025 เป็น 602,020 ตันภายในปี 2032 เพิ่มขึ้นประมาณ 19.8% โดยบราซิลยังคงเป็นตลาดที่ใหญ่ที่สุดของภูมิภาค การผลิตยานยนต์ การขนส่ง และการลงทุนด้านโครงสร้างพื้นฐานคาดว่าจะหนุนความต้องการ แม้ว่านโยบายการค้า ต้นทุนวัตถุดิบ และกำลังการผลิตขั้นปลายอาจส่งผลต่อจังหวะการเติบโต
23 Oct 2026 18:39 (GMT+8)
Aluminium Prices Supported by Potential Production Cuts and Rising Cost - Shanghai Metals Market (SMM)