Some Aluminium Capacity in Europe May Be Gone Forever amid Ongoing Energy Crisis

เผยแพร่แล้ว: Sep 5, 2022 14:57
In the aluminium industry, closing a smelter is a painful decision. Because once the power goes out and the production facility cools to room temperature, it will take months and tens of millions of dollars to restore.

In the aluminium industry, closing a smelter is a painful decision. Because once the power goes out and the production facility cools to room temperature, it will take months and tens of millions of dollars to restore.

However, with the cut-off of Gazprom supply and the intensifying energy crisis, the European aluminium industry seems to be facing an unprecedented "crisis of survival".

Norsk Hydro, one of the world's largest aluminium companies, is seeing its large plant in Slovakia face a potential shutdown. Not only that, but aluminium production in Europe has fallen to its lowest level since the 1970s.

In fact, the reason can be seen in aluminium's nickname - condensed electricity. The metal is used in almost everything from car frames and soda cans to ballistic missiles, but its production requires enormous amounts of energy. Data show that it takes about 15 megawatt-hours of electricity to produce one tonne of aluminium, enough to power five German households for a year.

Shutting down and restarting is expensive

Based on the recent market prices, the Slovakian smelter's annual electricity bill will be around 2 billion euros, said Milan Vesely, chief executive of Hydro. The company decided to close the smelter in Slovakia due to soaring energy prices and a lack of emissions offsets for smelters in some parts of the European Union.

Restarting the plant could take up to a year, Vesely said in an interview at the plant this week, and could only be achieved through a combination of lower electricity prices, a sharp rise in aluminium prices and additional government support.

“If we don't want to disrupt aluminium production in Europe, we have to act. If Europe considers aluminium to be a strategic metal, then aluminium smelters should have (preferential) electricity prices. " he added.

“This is a real survival crisis," said Paul Voss, director general of European Aluminium, an industry group.

Mark Hansen, chief executive of metals trading firm Concord Resources Ltd., said, "History has shown that once aluminium smelting capacity is gone, it's not coming back."

Uday Patel, senior research manager at research firm Wood Mackenzie, said: “Whenever economic growth slows and smelters’ profit margins come under pressure, we see European smelters shut down quite a bit of capacity. When the situation improves, some smelters never resumes the production. "

Patel said that he expects about 25% of that capacity could be permanently cut.

Wood Mackenzie estimates that European aluminium production has already fallen by about 1 million mt a year, with an additional 500,000 mt of capacity "highly likely" to be shut down.

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
การส่งออกลวดอลูมิเนียมของจีนลดลง 8.53% เมื่อเทียบกับเดือนก่อนหน้าในเดือนกรกฎาคม 2026 เพิ่มขึ้น 481.79% เมื่อเทียบกับปีก่อน [SMM Analysis]
11 ชั่วโมงที่แล้ว
การส่งออกลวดอลูมิเนียมของจีนลดลง 8.53% เมื่อเทียบกับเดือนก่อนหน้าในเดือนกรกฎาคม 2026 เพิ่มขึ้น 481.79% เมื่อเทียบกับปีก่อน [SMM Analysis]
อ่านเพิ่มเติม
การส่งออกลวดอลูมิเนียมของจีนลดลง 8.53% เมื่อเทียบกับเดือนก่อนหน้าในเดือนกรกฎาคม 2026 เพิ่มขึ้น 481.79% เมื่อเทียบกับปีก่อน [SMM Analysis]
การส่งออกลวดอลูมิเนียมของจีนลดลง 8.53% เมื่อเทียบกับเดือนก่อนหน้าในเดือนกรกฎาคม 2026 เพิ่มขึ้น 481.79% เมื่อเทียบกับปีก่อน [SMM Analysis]
ข้อมูลแสดงให้เห็นว่าในเดือนกรกฎาคม 2569 การส่งออกลวดอลูมิเนียมของจีนรวม 102,800 เมตริกตัน ลดลง 8.53% จากเดือนก่อนหน้า และเพิ่มขึ้น 481.79% จากปีก่อนหน้า ตั้งแต่เดือนมกราคมถึงกรกฎาคม 2569 การส่งออกลวดอลูมิเนียมของจีนถึง 386,300 เมตริกตัน เพิ่มขึ้น 152.78 จุดร้อยละจากปีก่อนหน้า
11 ชั่วโมงที่แล้ว
[การประชุมสุดยอดยานยนต์] เสฉวน ซัมซุง นิวแมททีเรียล ขอเชิญคุณเข้าร่วมการประชุมโซ่อุปทานยานยนต์ SMM ASCC2026 (ครั้งที่ 8)
11 ชั่วโมงที่แล้ว
[การประชุมสุดยอดยานยนต์] เสฉวน ซัมซุง นิวแมททีเรียล ขอเชิญคุณเข้าร่วมการประชุมโซ่อุปทานยานยนต์ SMM ASCC2026 (ครั้งที่ 8)
อ่านเพิ่มเติม
[การประชุมสุดยอดยานยนต์] เสฉวน ซัมซุง นิวแมททีเรียล ขอเชิญคุณเข้าร่วมการประชุมโซ่อุปทานยานยนต์ SMM ASCC2026 (ครั้งที่ 8)
[การประชุมสุดยอดยานยนต์] เสฉวน ซัมซุง นิวแมททีเรียล ขอเชิญคุณเข้าร่วมการประชุมโซ่อุปทานยานยนต์ SMM ASCC2026 (ครั้งที่ 8)
11 ชั่วโมงที่แล้ว
Daya Cloud Commerce ขอเชิญคุณเข้าร่วมการประชุมประจำปี SMM (ครั้งที่ 3) ว่าด้วยโลหะนอกกลุ่มเหล็กแห่งเซาท์ไชน่า ประจำปี 2026
12 ชั่วโมงที่แล้ว
Daya Cloud Commerce ขอเชิญคุณเข้าร่วมการประชุมประจำปี SMM (ครั้งที่ 3) ว่าด้วยโลหะนอกกลุ่มเหล็กแห่งเซาท์ไชน่า ประจำปี 2026
อ่านเพิ่มเติม
Daya Cloud Commerce ขอเชิญคุณเข้าร่วมการประชุมประจำปี SMM (ครั้งที่ 3) ว่าด้วยโลหะนอกกลุ่มเหล็กแห่งเซาท์ไชน่า ประจำปี 2026
Daya Cloud Commerce ขอเชิญคุณเข้าร่วมการประชุมประจำปี SMM (ครั้งที่ 3) ว่าด้วยโลหะนอกกลุ่มเหล็กแห่งเซาท์ไชน่า ประจำปี 2026
กลุ่มบริษัทต้าเย่เป็นผู้ผลิตมืออาชีพด้านวัสดุขัดโลหะ เครื่องพ่นทรายอัจฉริยะ อุปกรณ์รักษาสิ่งแวดล้อม และอะไหล่ชิ้นส่วนอุปกรณ์ โดยบูรณาการงานวิจัย พัฒนา ผลิต จัดจำหน่าย และให้บริการ เป็นผู้ให้บริการบำบัดพื้นผิวอย่างครบวงจรที่มุ่งมั่นนำเสนอโซลูชันพ่นทรายและพ่นกรวดแบบครอบคลุมทุกด้านแก่ลูกค้า
12 ชั่วโมงที่แล้ว