Imports of Unwrought Aluminium Alloy Fell MoM, while Exports Increased Nearly 50% MoM

เผยแพร่แล้ว: Aug 24, 2022 10:36 (GMT+8)
แหล่งที่มา: SMM
Traders are bullish on the market outlook, so the new orders have been rising recently. It is expected that the imported arrivals of aluminium alloy ingots after September will be more than those in July and August.

SHANGHAI, Aug 24 (SMM) - Customs data showed that China imported 102,900 mt of unwrought aluminium alloy in July 2022, a year-on-year increase of 17% and a month-on-month decline of 13%. The imports totalled 770,700 mt from January to July, up 34.5% on the year. In terms of export, China exported 25,500 mt of unwrought aluminium alloy in July, up 179% from the previous year and 49.9% from the previous month. From January to July, the total exports stood at 126,300 mt, a year-on-year growth of 35.7%.

The top three suppliers of unwrought aluminium alloy imports in July were Malaysia, South Korea and Thailand, the imports of which accounted for nearly half of the total volume. Among them, the import volume from Malaysia remained the largest, which was 30,600 mt, down 10,000 mt from June; imports from South Korea amounted to 10,700 mt, an increase of 2,000 mt from June. It should be pointed out that the imports from South Korean returned to more than 10,000 mt, but was still lower than the normal level; imports from Thailand increased slightly from June by 1,300 mt to 10,200 mt.. In addition, July marked the third consecutive month when the imports from Russian Federation hovered around 10,000 mt. Import volume from other countries such as Vietnam and India declined to varying degrees compared the the month before. As for exports, China exported 7,700 mt of unwrought aluminium alloy to Japan in July, which was flat from that in June, and the exports to South Korea increased to 6,300 mt

China’s top three importing provinces of unwrought aluminium alloys in July were Zhejiang, Guangdong, and Jiangsu, accounting for more than 70% of the total, though the ratio was slightly lower than that in June. Specifically, the imports of Zhejiang, Guangdong, and Jiangsu provinces stood at 43,900 mt, 23,700 mt, 7,000 mt respectively, accounting for 43%, 23%, and 7% respectively. Overall, the domestic imports of unwrought aluminium alloy in July dipped month-on-month but rose year-on-year. At the same time, the exports climbed year-on-year and month-on-month. In terms of imports, most of the aluminium alloy ingots that arrived at ports in July were under the orders placed after April. Considering that new orders have shrunk after April due to sustained import losses, the arrivals in July and August are expected to dwindle. Since mid-July, the aluminium prices, which had been falling for nearly two months, finally rallied, and the domestic prices of ADC12 secondary aluminium alloy also began to rise. The import losses gradually eased and the profits emerged. Meanwhile the import window was also opened since early August for half a month. As of August 23, imported ADC12 secondary aluminium alloy from Malaysia was quoted at $2,400/mt, up from $2,100/mt in July, and the import losses were once again expanded to 300-400 yuan/mt. However, traders are bullish on the market outlook, so the new orders have been rising recently. It is expected that the imported arrivals of aluminium alloy ingots after September will be more than those in July and August.

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
5 ชั่วโมงที่แล้ว
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
อ่านเพิ่มเติม
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
เมื่อวันที่ 20 กันยายน โรงรีดหยาบแผ่นหนาของโครงการผลิตอัจฉริยะวัสดุใหม่ฐานอะลูมิเนียมกำลังการผลิต 720,000 ตันต่อปี ของบริษัท เหอหนาน อี้รุ่ย นิวแมทีเรียลส์ เทคโนโลยี จำกัด ได้เริ่มเดินเครื่องผลิตอย่างเป็นทางการ โครงการนี้มีมูลค่าการลงทุนรวม 1.5 พันล้านหยวน โดยใช้พื้นที่โรงงานเดิมในการสร้างสายการรีดร้อนต่อเนื่อง “1+4” ระดับแนวหน้าของโลก พร้อมอุปกรณ์แปรรูปอะลูมิเนียมชั้นนำในอุตสาหกรรม เช่น เตาเผาแบบผลัก โครงการยังได้สร้างระบบอินเทอร์เน็ตอุตสาหกรรมที่สามารถตรวจสอบแบบเรียลไทม์และควบคุมแบบพลวัตของพารามิเตอร์การผลิตหลัก เช่น แรงรีดและอุณหภูมิ ซึ่งช่วยรับประกันคุณภาพที่เสถียรของผลิตภัณฑ์อะลูมิเนียมระดับไฮเอนด์ และเพิ่มส่วนแบ่งตลาดของผลิตภัณฑ์มูลค่าเพิ่มสูงอย่างต่อเนื่อง
5 ชั่วโมงที่แล้ว
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
5 ชั่วโมงที่แล้ว
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
อ่านเพิ่มเติม
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
กินีมีแผนขยายความร่วมมือกับเกลนคอร์ไปสู่การกลั่นอะลูมินา พลังงาน ทองคำ และโลหะพื้นฐาน โดยมุ่งเพิ่มรายได้จากเหมืองแร่ ส่งเสริมการแปรรูปในประเทศและการพัฒนาอุตสาหกรรมจากทรัพยากรแร่ และเสริมสร้างความร่วมมือกับตลาดและบริษัทเหมืองแร่ระหว่างประเทศในจีน ตะวันออกกลาง และภูมิภาคอื่น ๆ
5 ชั่วโมงที่แล้ว
ติงเฟิง อลูมิเนียม เริ่มก่อสร้างเฟส 2 ตั้งเป้ากำลังการผลิตปีละ 200,000 ตันในกัมพูชา
5 ชั่วโมงที่แล้ว
ติงเฟิง อลูมิเนียม เริ่มก่อสร้างเฟส 2 ตั้งเป้ากำลังการผลิตปีละ 200,000 ตันในกัมพูชา
อ่านเพิ่มเติม
ติงเฟิง อลูมิเนียม เริ่มก่อสร้างเฟส 2 ตั้งเป้ากำลังการผลิตปีละ 200,000 ตันในกัมพูชา
ติงเฟิง อลูมิเนียม เริ่มก่อสร้างเฟส 2 ตั้งเป้ากำลังการผลิตปีละ 200,000 ตันในกัมพูชา
เมื่อวันที่ 21 กันยายน พิธีวางศิลาฤกษ์เฟส 2 (โครงการ A3) ของบริษัท Dingfeng Aluminum Manufacturing (Cambodia) Co., Ltd. ซึ่งเป็นบริษัทในเครือ Dihang Group ได้จัดขึ้น ตั้งอยู่ในเขตเศรษฐกิจพิเศษถนนหมายเลข 6 จังหวัดกำปงจาม ประเทศกัมพูชา Dingfeng Aluminum ดำเนินธุรกิจหลักด้านการวิจัยและพัฒนาการผลิตแท่งอะลูมิเนียมอัลลอยด์ระดับไฮเอนด์ โพรไฟล์อะลูมิเนียมระดับไฮเอนด์ และผลิตภัณฑ์สนับสนุนยานยนต์พลังงานใหม่ พร้อมด้วยกระบวนการผลิตและอุปกรณ์ครบวงจรครอบคลุมการหลอมและการหล่อ การรีดขึ้นรูป การชุบอโนไดซ์ การแปรรูปเชิงลึก การกลึงความละเอียดสูง และการปรับสภาพพื้นผิว เมื่อเฟส 2 เดินเครื่องเต็มกำลัง กำลังการผลิตต่อปีจะสูงถึง 200,000 ตัน มูลค่าผลผลิตต่อปีสูงถึง 700 ล้านดอลลาร์สหรัฐ เฟส 2 (โครงการ A3) มีแผนประกอบด้วยโรงงานแปรรูปยานยนต์พลังงานใหม่ขนาด 24,340 ตร.ม. (อาคารโครงสร้างเหล็กชั้นเดียว) โรงงานรีดขึ้นรูปขนาด 15,291 ตร.ม. และสิ่งอำนวยความสะดวกสนับสนุน เช่น อาคารสำนักงาน ป้อมยาม และห้องจ่ายไฟฟ้า
5 ชั่วโมงที่แล้ว