Status quo and Prospect of China Lithium-Battery Aluminium Foil Supply and Demand

เผยแพร่แล้ว: Aug 3, 2022 13:53
According to SMM statistics, China lithium-battery aluminium foil (“battery foil”) output stood at about 128,000 mt in 2021, accounting for about 2.8% of the country's total aluminium foil output. A year-on-year growth of battery foil recorded a high of 83%, far higher than other aluminium foil products.

SHANGHAI, Aug 3 (SMM) - According to SMM statistics, China lithium-battery aluminium foil (“battery foil”) output stood at about 128,000 mt in 2021, accounting for about 2.8% of the country's total aluminium foil output. A year-on-year growth of battery foil recorded a high of 83%, far higher than other aluminium foil products.

Meanwhile, the new capacity of battery foil is also put into production at a fast pace According to SMM statistics, there are currently 15 disclosed battery foil projects under construction, which will be put into operation from 2022 to 2025, with a total capacity of 592,000 mt. In addition, some companies may convert the existing light gauge foil capacity into battery foil production capacity. China's battery oil capacity is expected to reach one million mt by 2025.

In terms of the downstream, battery foil is used in three major terminal fields, including new energy vehicle power battery, energy storage battery, and electronics battery, with power battery taking the lion’s share. And the structure is expected to remain so in the next few years. As an important part of China's power system reform and new energy power construction, energy storage batteries have been quick in ramping up the production, but it is unlikely to take over power battery in terms of total foil consumption in recent years.

In recent years, China's new energy vehicle industry has developed rapidly. In 2021, the power battery output stood at 220GWH, with a year-on-year increase of 165%. The year-on-year growth rate in the first five months of 2022 is also above 100%. The output of new energy vehicles power batteries has been growing rapidly, and the exports of lithium batteries continue to rise as well, supporting the long-term improvement in the demand for battery foil.

SMM believes that in recent years, the battery foil will maintain a tight balance between supply and demand based on the data available. Although the output of power batteries is growing rapidly and the growth rate is higher than that of battery foil, it is expected that the battery foil capacity will still be higher than the demand by 2025, which can meet the development demands in the new energy industry.

At the same time, although there is the problem of excess battery foil capacity, some aluminium foil companies still focus on the high-end light gauge foil due to the low yield and long account period of battery foil, and will not expand foil capacity blindly. At present, the light gauge foil and battery foil production lines can be easily transformed both ways. In recent years, as China's economy has been improving steadily, the disposable income of residents and the consumer confidence index have grown steadily, including the retail industry of consumer goods. The output of milk, cigarettes and other products has increased accordingly, heightening the demand for light gauge foil, which can offset the excess battery foil capacity. Therefore, the tight balance between supply and demand in the battery foil industry will be maintained.

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
อุปทานบิลเล็ตอะลูมิเนียมของจีน: เดือนกรกฎาคมขยายแนวโน้มขาขึ้นที่ขับเคลื่อนด้วยแรงเฉื่อย; คาดว่าจะย่อตัวลงจากระดับสูงในเดือนสิงหาคม
3 ชั่วโมงที่แล้ว
อุปทานบิลเล็ตอะลูมิเนียมของจีน: เดือนกรกฎาคมขยายแนวโน้มขาขึ้นที่ขับเคลื่อนด้วยแรงเฉื่อย; คาดว่าจะย่อตัวลงจากระดับสูงในเดือนสิงหาคม
อ่านเพิ่มเติม
อุปทานบิลเล็ตอะลูมิเนียมของจีน: เดือนกรกฎาคมขยายแนวโน้มขาขึ้นที่ขับเคลื่อนด้วยแรงเฉื่อย; คาดว่าจะย่อตัวลงจากระดับสูงในเดือนสิงหาคม
อุปทานบิลเล็ตอะลูมิเนียมของจีน: เดือนกรกฎาคมขยายแนวโน้มขาขึ้นที่ขับเคลื่อนด้วยแรงเฉื่อย; คาดว่าจะย่อตัวลงจากระดับสูงในเดือนสิงหาคม
ตลาดบิลเล็ตอะลูมิเนียม SMM: ในเดือนกรกฎาคม อัตราการเดินเครื่องของบิลเล็ตอะลูมิเนียมเพิ่มขึ้น 1.1 จุดเปอร์เซ็นต์จากเดือนก่อนหน้าเป็น 58.3% และเพิ่มขึ้นอย่างมาก 5.2 จุดเปอร์เซ็นต์เมื่อเทียบกับปีก่อนหน้า โดยได้รับแรงหนุนจากผลการดำเนินงานที่แข็งแกร่งของค่าธรรมเนียมการแปรรูปบิลเล็ตอะลูมิเนียมในไตรมาส 2...
3 ชั่วโมงที่แล้ว
แผ่นดินไหวขนาด 7.7 ในอินโดนีเซียส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างน้อย โดยแรงสั่นสะเทือนแทบเป็นศูนย์
12 ชั่วโมงที่แล้ว
แผ่นดินไหวขนาด 7.7 ในอินโดนีเซียส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างน้อย โดยแรงสั่นสะเทือนแทบเป็นศูนย์
อ่านเพิ่มเติม
แผ่นดินไหวขนาด 7.7 ในอินโดนีเซียส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างน้อย โดยแรงสั่นสะเทือนแทบเป็นศูนย์
แผ่นดินไหวขนาด 7.7 ในอินโดนีเซียส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างน้อย โดยแรงสั่นสะเทือนแทบเป็นศูนย์
ข้อเสนอแนะการติดตาม SMM: แผ่นดินไหวขนาด 7.7 บนเกาะฟลอเรส ประเทศอินโดนีเซีย ส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างจำกัด ในด้านการกระจายกำลังการผลิต บอกไซต์ อะลูมินา และกำลังการผลิตอะลูมิเนียมส่วนใหญ่กระจุกตัวอยู่ทางตะวันตกของอินโดนีเซีย โดยทั่วไปอยู่ห่างจากศูนย์กลางแผ่นดินไหวมากกว่า 1,400 กม.; แม้แต่โรงถลุงอะลูมิเนียมที่ใกล้ที่สุด—Sulawesi Morowali Huachin Aluminum—ก็อยู่ห่างราว 624 กม. ซึ่งยังอยู่นอกระยะความเสียหาย 300 กม. เมื่อประกอบกับความสูงคลื่นสึนามิต่ำกว่า 0.4 เมตร แรงกระแทกด้านอุปทานจริงแทบเป็นศูนย์ ด้านราคา อาจสะท้อนแรงกระเพื่อมเชิงอารมณ์ระยะสั้นเพียง 0–1% มากที่สุด ซึ่งคาดว่าจะคลี่คลายภายใน 1–3 วัน โดยไม่เปลี่ยนแนวโน้มระยะกลาง
12 ชั่วโมงที่แล้ว
ดีทีไอฟิลิปปินส์วางแผนบังคับรับรองผลิตภัณฑ์อะลูมิเนียม เพื่อการันตีมาตรฐานคุณภาพและความปลอดภัย
14 Aug 2026 22:40
ดีทีไอฟิลิปปินส์วางแผนบังคับรับรองผลิตภัณฑ์อะลูมิเนียม เพื่อการันตีมาตรฐานคุณภาพและความปลอดภัย
อ่านเพิ่มเติม
ดีทีไอฟิลิปปินส์วางแผนบังคับรับรองผลิตภัณฑ์อะลูมิเนียม เพื่อการันตีมาตรฐานคุณภาพและความปลอดภัย
ดีทีไอฟิลิปปินส์วางแผนบังคับรับรองผลิตภัณฑ์อะลูมิเนียม เพื่อการันตีมาตรฐานคุณภาพและความปลอดภัย
ตามรายงานของสื่อฟิลิปปินส์เมื่อวันที่ 12 กระทรวงการค้าและอุตสาหกรรมฟิลิปปินส์ (DTI) มีแผนผลักดันการจัดตั้งโครงการรับรองภาคบังคับสำหรับผลิตภัณฑ์อะลูมิเนียม ซึ่งกำหนดให้ผู้ประกอบการผลิตในฟิลิปปินส์ทั้งในประเทศและต่างชาติต้องขอใบอนุญาตด้านคุณภาพและความปลอดภัยอย่างเป็นทางการของฟิลิปปินส์ล่วงหน้า และใช้แนวทางการรับรองแบบ “หนึ่งโรงงาน หนึ่งใบรับรอง”
14 Aug 2026 22:40
Status quo and Prospect of China Lithium-Battery Aluminium Foil Supply and Demand - Shanghai Metals Market (SMM)