How Will SHFE Nickel Perform in Second Half of 2022 after Recording a Gain of 26% in the First Half?

เผยแพร่แล้ว: Jun 23, 2022 10:17 (GMT+8)
With the expected rising supply of NPI, which will contain the demand for pure nickel, nickel prices are likely to maintain a downward trajectory in the long run, coupled with rising output of high-grade nickel matte.

SHANGHAI, Jun 23 (SMM) - Affected by extreme moves of LME nickel in March 2022, SHEF nickel surged as well, and then stabilised after LME nickel restored its normal trading. SHFE nickel showed an inverted V-shaped move since the beginning of the year until June 22.

Spot market

SMM #1 refined nickel spot price set an all-time high at 292,700 yuan/mt on March 9 since its recording with SMM, and kept dropping since then, with a combined fall of 27.74% as of June 21, while the YTD increase was 37.74%.

According to SMM research, nickel prices rose as a whole in the first half of 2022 amid constantly falling pure nickel inventory across the globe. Looking back on the first quarter, LME nickel once soared to an abnormal high of $55,000/mt, and pulled up SHFE nickel as well. LME nickel then gradually dropped amid the introduction of stringent regulations, and the trading volume slumped in light of the violent volatility of nickel prices.

In the second quarter, both SHFE and LME nickel prices posted palpable declines amid a series of tightening monetary policies including rising US interest rate, shrinking balance sheet. From the perspective of raw material hedging, manufactures were generally less willing to use LME nickel as a hedging tool though it has been correcting, and the vitality of LME nickel also remained low. In terms of price level, downstream sectors in China, such as nickel sulphate, battery, alloy and electroplating, saw extensive production cuts, and nickel prices are expected to return to normal with lasting negative feedback from the downstream players.

On the supply side, spot pure nickel imports were in constant losses in the first quarter, and turned profitable in the second quarter. Though LME nickel inventory was low, domestic inventory rose slightly as early as in April with domestic nickel sulphate plants resuming the production of refined nickel and amid import profits of pure nickel. In addition, as NPI production lines commissioning one after another, primary nickel supply is likely to pick up, potentially suppressing the demand for pure nickel if NPI prices keep falling.

On the demand side, stainless steel demand recovery was slower than expected in March and April with recurring pandemic in Wuxi and Foshan. Stainless steel inventory rose significantly with the imbalance between supply and demand. The positive news is that the terminal operating rates have rebounded entering the second quarter. In terms of alloy, large-scale purchases could be expected when the prices fall.

To sum up, pure nickel supply was relatively sufficient in the second quarter, and the downstream demand also remained stable. With the expected rising supply of NPI, which will contain the demand for pure nickel, nickel prices are likely to maintain a downward trajectory in the long run, coupled with rising output of high-grade nickel matte.

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
【แฟลช | ค่าธรรมเนียมท่อผสมโมลิบดีนัมของ Tubacex เดือนตุลาคมปรับตัวผสมผสาน】
02 Oct 2026 10:52 (GMT+8)
【แฟลช | ค่าธรรมเนียมท่อผสมโมลิบดีนัมของ Tubacex เดือนตุลาคมปรับตัวผสมผสาน】
อ่านเพิ่มเติม
【แฟลช | ค่าธรรมเนียมท่อผสมโมลิบดีนัมของ Tubacex เดือนตุลาคมปรับตัวผสมผสาน】
【แฟลช | ค่าธรรมเนียมท่อผสมโมลิบดีนัมของ Tubacex เดือนตุลาคมปรับตัวผสมผสาน】
Tubacex ประกาศค่าธรรมเนียมผสมโลหะสำหรับท่อประจำเดือนตุลาคม ในสกุลยูโร ท่อ 316/316L รีดร้อน/รีดเย็นปรับลดลงจาก 5.07/5.59 ยูโรต่อกิโลกรัม (5,070/5,590 ยูโรต่อตัน) เป็น 5.05/5.56 ยูโรต่อกิโลกรัม (5,050/5,560 ยูโรต่อตัน) วัสดุที่มีโมลิบดีนัมสูง (Mo มากกว่า 2.5%) ปรับลดลงจาก 5.26/5.79 เป็น 5.23/5.76 ยูโรต่อกิโลกรัม ค่าธรรมเนียมสำหรับ 2205 และ 2507 ทรงตัว ขณะที่ 254 SMO ปรับขึ้นจาก 9.64/10.62 เป็น 9.67/10.65 ยูโรต่อกิโลกรัม บทวิเคราะห์จาก SMM: ท่อเกรดที่มีโมลิบดีนัมส่วนใหญ่ทรงตัวหรือปรับลดลงเล็กน้อย ขณะที่ 254 SMO ปรับสูงขึ้น สะท้อนการส่งผ่านต้นทุนที่แตกต่างกันในแต่ละเกรด
02 Oct 2026 10:52 (GMT+8)
[SMM สแตนเลสแฟลช] ราคาเศษสแตนเลสอินเดียปรับต่างทิศทาง โดย 304 อ่อนตัวตามนิกเกิล ขณะที่ 316 ตึงตัวยังทรงตัว
02 Oct 2026 10:50 (GMT+8)
[SMM สแตนเลสแฟลช] ราคาเศษสแตนเลสอินเดียปรับต่างทิศทาง โดย 304 อ่อนตัวตามนิกเกิล ขณะที่ 316 ตึงตัวยังทรงตัว
อ่านเพิ่มเติม
[SMM สแตนเลสแฟลช] ราคาเศษสแตนเลสอินเดียปรับต่างทิศทาง โดย 304 อ่อนตัวตามนิกเกิล ขณะที่ 316 ตึงตัวยังทรงตัว
[SMM สแตนเลสแฟลช] ราคาเศษสแตนเลสอินเดียปรับต่างทิศทาง โดย 304 อ่อนตัวตามนิกเกิล ขณะที่ 316 ตึงตัวยังทรงตัว
ตลาดเศษสแตนเลสของอินเดียเคลื่อนไหวในทิศทางที่แตกต่างกันในสัปดาห์สิ้นสุดวันที่ 1 ตุลาคม ราคาเศษ 304 ในประเทศปรับตัวลดลงเล็กน้อยและข้อเสนอราคานำเข้าปรับตามลงมา ขณะที่ราคา 316 ทรงตัวทั้งในตลาดในประเทศและตลาดนำเข้า ราคานิกเกิล LME ที่อ่อนตัวลงกดดันความเชื่อมั่นของ 304 และผู้ซื้อยังคงซื้อเฉพาะความต้องการเร่งด่วน เนื่องจากการซื้อขายชะลอตัวในช่วงเทศกาล อุปทานที่ตึงตัวจำกัดแรงกดดันขาลงของ 316 ด้านการจัดซื้อ ระยะเวลาดำเนินการที่สั้นลงหลังรัฐบาลผ่อนคลายข้อกำหนดใบรับรองการตรวจสอบก่อนการขนส่ง (PSIC) ประกอบกับต้นทุนนำเข้าที่เพิ่มขึ้น ยังคงจำกัดความยืดหยุ่นของโรงงาน โรงงานบางแห่งกำลังพิจารณาเหล็กแท่งเล็ก เหล็กแท่งแบน และนิกเกิลพิกไอรอน (NPI) เป็นทางเลือกแทนเศษเหล็กเพื่อบริหารต้นทุนวัตถุดิบ เมื่อมองไปข้างหน้า ข้อเสนอของสหภาพยุโรปที่จะจำกัดการส่งออกเศษโลหะไปยังอินเดียภายใต้ระเบียบการขนส่งของเสียฉบับใหม่ (WSR) หากได้รับการรับรอง จะยิ่งทำให้ทางเลือกการนำเข้าเศษเหล็กของอินเดียแคบลงอีก ในระยะสั้น เศษ 304 เผชิญแรงกดดันขาลงเล็กน้อยหากนิกเกิลยังคงอ่อนตัว ขณะที่ 316 คาดว่าจะยังคงแข็งแกร่งตราบใดที่อุปทานยังตึงตัว พัฒนาการของ PSIC และความคุ้มค่าทางเศรษฐศาสตร์เปรียบเทียบระหว่างเหล็กแท่งเล็กกับ NPI จะเป็นปัจจัยสำคัญที่ต้องจับตามอง
02 Oct 2026 10:50 (GMT+8)
【แฟลช | เมทัลลัสปรับขึ้นส่วนประกอบค่าธรรมเนียมโมลิบดีนัมเดือนตุลาคมสำหรับเหล็ก 300M】
02 Oct 2026 10:47 (GMT+8)
【แฟลช | เมทัลลัสปรับขึ้นส่วนประกอบค่าธรรมเนียมโมลิบดีนัมเดือนตุลาคมสำหรับเหล็ก 300M】
อ่านเพิ่มเติม
【แฟลช | เมทัลลัสปรับขึ้นส่วนประกอบค่าธรรมเนียมโมลิบดีนัมเดือนตุลาคมสำหรับเหล็ก 300M】
【แฟลช | เมทัลลัสปรับขึ้นส่วนประกอบค่าธรรมเนียมโมลิบดีนัมเดือนตุลาคมสำหรับเหล็ก 300M】
Metallus ประกาศค่าธรรมเนียมวัตถุดิบเดือนตุลาคมสำหรับวันที่ 1–30 ตุลาคม ส่วนประกอบโมลิบดีนัมสำหรับเหล็ก 300M เพิ่มขึ้น 0.52% เป็น 15.176 ดอลลาร์/ฮันเดรดเวท หรือประมาณ 334.57 ดอลลาร์/ตันเหล็ก จาก 15.098 ดอลลาร์/ฮันเดรดเวท หรือ 332.85 ดอลลาร์/ตัน ค่าธรรมเนียมรวมที่ประกาศเพิ่มขึ้น 1.03% เป็น 45.054 ดอลลาร์/ฮันเดรดเวท เศษเหล็กเพิ่มขึ้นเป็น 17.750 ดอลลาร์/ฮันเดรดเวท ขณะที่ค่าธรรมเนียมพลังงานแยกสำหรับเหล็กเส้นและท่อลดลงจาก 1.296 ดอลลาร์/ฮันเดรดเวท หรือประมาณ 28.57 ดอลลาร์/ตัน เป็น 0.050 ดอลลาร์/ฮันเดรดเวท หรือ 1.10 ดอลลาร์/ตัน
02 Oct 2026 10:47 (GMT+8)