Zinc Prices Likely to Rebound in May though with Limited Upside Momentum

เผยแพร่แล้ว: May 17, 2022 14:18 (GMT+8)
แหล่งที่มา: SMM
However, the current fundamentals remain strong, as LME inventory is still falling, and the European premiums kept rising in early May and remain at around $500/mt for the moment. On the whole, zinc prices still gain support from the fundamentals.

SHANGHAI, May 17 (SMM) - The US Fed decided to raise the interest rate by 50 basis points at its May monetary policy. At the same time, it will officially start to shrink the balance sheet from June 1, which also means that the Fed's monetary policy has been fully tightened. Since the end of the meeting, non-ferrous metals prices have fallen rapidly from high, which is also due to the fact that the market transaction logic has shifted from tight supply to gloomy expectations of future economy and consumption. On the contradiction between strong fundamentals and shadowed macro expectation, the price volatility has been wild, and the risk of zinc price transactions has also been exacerbated. SMM will discuss zinc prices from both overseas and domestic perspectives.

In the overseas market, macro-level concerns dominated the market, and the sudden drop in overseas sentiment pulled down the zinc price from $4,000/mt to $3,600/mt. On the supply side, the old problems still existed, and the electricity price in Europe was high, sustaining the smelting cost at a high level. With the decline in zinc prices, European smelters suffered losses, and it is difficult to see smelters resuming the production from previous production suspension or reduction. As such, the supply remained tight. On the consumption side, LME inventory has dropped more slowly compared to April. Meanwhile, China's exported zinc ingots also began to be delivered to LME warehouses, and then LME cash-to-three-month backwardation narrowed, weakening market confidence on consumption. However, the current fundamentals remain strong, as LME inventory is still falling, and the European premiums kept rising in early May and remain at around $500/mt for the moment. On the whole, zinc prices still gain support from the fundamentals. However, under the circumstance that the market focus has changed, there is no further stimulus overseas. It is expected that LME Zinc prices will rebound, but are unlikely to return to the previous high.

In China, several factors are worth attention. 1. Ore supply was still in shortage. The average TC of zinc ore has dropped to 3,500 yuan/mt, while the TC in Yunnan has fallen to 3,300 yuan/mt, which has also raised the production cost of smelters. The cost support will be tested. 2. The recently rising SHFE/LME price ratio has led to the complete closure of the export window. Reverse arbitrage holders that plan to export before could pay off by closing the positions, so these zinc ingots may become visible inventory. As such, the market needs to pay attention to changes in domestic inventories. According to market sources, most of the zinc ingots have been set for ships and overseas warrants, and the export plan remains unchanged. 3. The rising price ratio, on the other hand, opens the import window on the mine end. Although the recent shortage of ores cannot be fully resolved, some smelters have already started to restock for the third quarter, which also means that the domestic zinc ingot output in the second half of the year will increase. 4. Only when the pandemic situation fully recovers can we expect the recovery of consumption and the introduction of consumption-oriented supporting policies. On the whole, strong driving forces are required to trigger further zinc price moves. Before that, there is an opportunity for zinc to rebound, but the strength will not be very strong.

Risks: overseas energy, LME inventory that begins to accumulate continuously, European smelters’ production resumption, domestic pandemic

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
เหมืองวาเรชของ DPM ตั้งเป้ากำลังการผลิตรวม 850,000 ตันต่อปี
40 นาทีที่แล้ว
เหมืองวาเรชของ DPM ตั้งเป้ากำลังการผลิตรวม 850,000 ตันต่อปี
อ่านเพิ่มเติม
เหมืองวาเรชของ DPM ตั้งเป้ากำลังการผลิตรวม 850,000 ตันต่อปี
เหมืองวาเรชของ DPM ตั้งเป้ากำลังการผลิตรวม 850,000 ตันต่อปี
DPM Metals Inc. เปิดเผยผลการผลิตเบื้องต้นสำหรับไตรมาสที่ 3 ปี 2026 เหมืองโพลีเมทัลลิก Vareš ในบอสเนียและเฮอร์เซโกวีนาแปรรูปแร่ประมาณ 143,000 ตัน ผลิตหัวแร่ที่มีสังกะสีประมาณ 28 ล้านปอนด์และตะกั่ว 17 ล้านปอนด์ โลหะที่ชำระเงินได้ในหัวแร่ที่ขายระหว่างไตรมาสมีปริมาณสังกะสีประมาณ 16 ล้านปอนด์และตะกั่ว 12 ล้านปอนด์ สำหรับเก้าเดือนแรกของปี 2026 Vareš ผลิตหัวแร่ที่มีสังกะสีประมาณ 52 ล้านปอนด์และตะกั่ว 35 ล้านปอนด์ DPM ประกาศการผลิตเชิงพาณิชย์ที่ Vareš แล้ว ขณะที่การดำเนินงานยังคงเพิ่มกำลังการผลิตต่อเนื่องสู่เป้าหมายอัตราการผลิต 850,000 ตันต่อปีภายในสิ้นปี 2026 การก่อสร้างโรงกรองหางแร่แห่งที่สองและโรงงานถมกลับด้วยเพสต์ใกล้แล้วเสร็จ โดยคาดว่าจะเริ่มการทดสอบเดินเครื่องในเดือนพฤศจิกายนและธันวาคมตามลำดับ
40 นาทีที่แล้ว
【ข่าวด่วน SMM】GoldHaven เริ่มเจาะสำรวจที่เป้าหมายเงิน-ตะกั่ว-สังกะสีโซน D หลังเจาะที่ Kuhn ครบ 1,729 เมตร
1 ชั่วโมงที่แล้ว
【ข่าวด่วน SMM】GoldHaven เริ่มเจาะสำรวจที่เป้าหมายเงิน-ตะกั่ว-สังกะสีโซน D หลังเจาะที่ Kuhn ครบ 1,729 เมตร
อ่านเพิ่มเติม
【ข่าวด่วน SMM】GoldHaven เริ่มเจาะสำรวจที่เป้าหมายเงิน-ตะกั่ว-สังกะสีโซน D หลังเจาะที่ Kuhn ครบ 1,729 เมตร
【ข่าวด่วน SMM】GoldHaven เริ่มเจาะสำรวจที่เป้าหมายเงิน-ตะกั่ว-สังกะสีโซน D หลังเจาะที่ Kuhn ครบ 1,729 เมตร
GoldHaven Resources Corp. ประกาศเสร็จสิ้นโครงการขุดเจาะปี 2026 ที่เป้าหมายทังสเตนสการ์น Kuhn ภายในโครงการ Magno ในรัฐบริติชโคลัมเบีย ประเทศแคนาดา โครงการประกอบด้วยหลุมเจาะ 8 หลุม รวมความยาว 1,729 เมตร หลุมเจาะ GOH26-08 พบแนวแร่สการ์นที่ความลึกประมาณ 80 เมตรตามแนวระดับจากโซนสการ์นด้านล่างที่เคยพบในหลุม GOH26-04 บริษัทระบุว่าจำเป็นต้องมีการขุดเจาะเพิ่มเติมและการวิเคราะห์ในห้องปฏิบัติการเพื่อยืนยันความต่อเนื่องและเกรดของแนวแร่ หลังจากเสร็จสิ้นโครงการ Kuhn แล้ว GoldHaven ได้เคลื่อนย้ายแท่นขุดเจาะไปยังเป้าหมายเงิน-ตะกั่ว-สังกะสีโซน D ซึ่งขณะนี้อยู่ระหว่างการขุดเจาะ โซน D ตั้งอยู่ภายในโครงการ Magno ที่กว้างขึ้น และเป็นแหล่งแร่โพลีเมทัลลิกในหินคาร์บอเนตของกลุ่มหิน Atan ยุคแคมเบรียนตอนต้น ประกอบด้วยแร่กาลีนา สฟาเลอไรต์ และซัลไฟด์มวลแน่นเฉพาะจุด โครงการปัจจุบันออกแบบมาเพื่อทดสอบรูปทรงเรขาคณิตและศักยภาพการขยายตัวของแนวแร่เงิน-ตะกั่ว-สังกะสีที่เคยระบุไว้ในอดีต
1 ชั่วโมงที่แล้ว
【ข่าวด่วน SMM】Metalsource เริ่มการขุดเจาะระยะที่ 2 ที่ซิลเวอร์ฮิลล์ เป้าหมายพื้นที่ห่างออกไปทางเหนือ 1.12 กิโลเมตร
1 ชั่วโมงที่แล้ว
【ข่าวด่วน SMM】Metalsource เริ่มการขุดเจาะระยะที่ 2 ที่ซิลเวอร์ฮิลล์ เป้าหมายพื้นที่ห่างออกไปทางเหนือ 1.12 กิโลเมตร
อ่านเพิ่มเติม
【ข่าวด่วน SMM】Metalsource เริ่มการขุดเจาะระยะที่ 2 ที่ซิลเวอร์ฮิลล์ เป้าหมายพื้นที่ห่างออกไปทางเหนือ 1.12 กิโลเมตร
【ข่าวด่วน SMM】Metalsource เริ่มการขุดเจาะระยะที่ 2 ที่ซิลเวอร์ฮิลล์ เป้าหมายพื้นที่ห่างออกไปทางเหนือ 1.12 กิโลเมตร
Metalsource Mining ประกาศการเจาะสำรวจระยะที่ 2 ที่ซิลเวอร์ฮิลล์ รัฐนอร์ทแคโรไลนา โดยมุ่งเป้าไปที่ความผิดปกติของ IP ซึ่งอยู่ห่างจากแนวแร่ที่ทราบแล้วไปทางเหนือประมาณ 1,120 เมตร ได้เพิ่มแท่นเจาะชุดที่สองและกะกลางคืนเพื่อสนับสนุนการขยายพื้นที่ใกล้เหมืองและการทดสอบในพื้นที่ที่ไกลออกไป หลุม SH26-34 พบแนวแร่หนาประมาณ 20 เมตรจากการสังเกตด้วยตาเปล่าในแกนเจาะ โดยอยู่ระหว่างรอผลวิเคราะห์ นอกจากนี้ยังพบแนวแร่ทองคำ-เงิน-ตะกั่ว-สังกะสีในหินโผล่ใต้ดินที่อยู่ห่างออกไปทางตะวันออกเฉียงเหนือ 240 เมตร
1 ชั่วโมงที่แล้ว