Aluminium Prices Continue to Fall amid Supply-Demand Contradictions

เผยแพร่แล้ว: Mar 10, 2022 10:23
แหล่งที่มา: SMM
SHANGHAI, Mar 10 (SMM) – Overnight, the most-traded SHFE 2204 aluminium contract opened at 21,825 yuan/mt, with the highest and lowest prices at 21,825 yuan/mt and 21,205 yuan/mt before closing at 21,300 yuan/mt, down 640 yuan/mt or 2.92%.

SHANGHAI, Mar 10 (SMM) – Overnight, the most-traded SHFE 2204 aluminium contract opened at 21,825 yuan/mt, with the highest and lowest prices at 21,825 yuan/mt and 21,205 yuan/mt before closing at 21,300 yuan/mt, down 640 yuan/mt or 2.92%. LME aluminium opened at $3,680/mt on Wednesday and hit a high and low of $3,680/mt and $3,300/mt respectively before closing at $3,301/mt, a drop of $380/mt or 10.32%.

Macro: China's CPI rose 0.9% year-on-year and 0.6% month-on-month in February; PPI rose 8.8% year-on-year and 0.5% month-on-month. (Bullish factor ★);

The US dollar index fell below the 98 and closed down 1.178% at 97.97. The yield on the 10-year US Treasury bond continued its upward trend and finally closed at 1.967%. (Negative factor ★)

Although the Federal Reserve has not raised interest rates, the US Treasury yield curve is close to an inverted pattern, which is usually a prelude to a recession. Forward markets show traders are bracing for an inversion of the 2-year and 10-year yield curve within a year.

(Negative factor ★)

Fundamentals: Aluminium billet conversion margins across mainstream markets continued to rise yesterday and rose 50-75 yuan/mt. According to SMM data, the mainstream conversion margins of Φ90 aluminium billets in east China were 400 yuan/mt. Some traders were willing to negotiate lower margins according to the purchasing volume, but few deals were done. The mainstream conversion margins of Φ90 aluminium billets in south China were offered at 430 yuan/mt, and 400 yuan/mt for Φ120 and Φ178 billets, but downstream wait-and-see sentiment was strong, with thin trades. (Negative factor ★)

Prices of aluminium scrap continued to fall. Prices of aluminium extrusion scrap and aluminium tense scrap fell by 300 yuan/mt and 200 yuan/mt respectively. Due to the continuous sharp drop in aluminium prices, aluminium scrap recyclers refrained from selling cargoes that they purchased at higher prices a few days ago. Aluminium scrap recyclers only sold to downstream producers with long-term cooperation. (Negative factor ★)  

Spot market: After two days of sharp declines in the futures prices, the downstream consumption in east China did not improve significantly. It still takes time for end demand to recover. Spot discounts in east China were 40-60 yuan/mt. Traders who have positions in the futures market for hedging purpose sold actively in the spot market.

In summary, from the perspective of the supply side, the resumption of production at domestic aluminium smelters has accelerated. With the steady growth of domestic aluminium daily output in March, the aluminium output is expected to total 3.3 million mt, and the operating capacity in May is expected to return to the level in the same period last year. The demand side was suppressed by high aluminium prices, and the inventory remained high. After two days of sharp declines in the futures prices, the downstream consumption did not improve significantly. It still takes time for end demand to recover. On the whole, in the absence of bullish factors, the price correction is normal.

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
อุปทานบิลเล็ตอะลูมิเนียมของจีน: เดือนกรกฎาคมขยายแนวโน้มขาขึ้นที่ขับเคลื่อนด้วยแรงเฉื่อย; คาดว่าจะย่อตัวลงจากระดับสูงในเดือนสิงหาคม
4 ชั่วโมงที่แล้ว
อุปทานบิลเล็ตอะลูมิเนียมของจีน: เดือนกรกฎาคมขยายแนวโน้มขาขึ้นที่ขับเคลื่อนด้วยแรงเฉื่อย; คาดว่าจะย่อตัวลงจากระดับสูงในเดือนสิงหาคม
อ่านเพิ่มเติม
อุปทานบิลเล็ตอะลูมิเนียมของจีน: เดือนกรกฎาคมขยายแนวโน้มขาขึ้นที่ขับเคลื่อนด้วยแรงเฉื่อย; คาดว่าจะย่อตัวลงจากระดับสูงในเดือนสิงหาคม
อุปทานบิลเล็ตอะลูมิเนียมของจีน: เดือนกรกฎาคมขยายแนวโน้มขาขึ้นที่ขับเคลื่อนด้วยแรงเฉื่อย; คาดว่าจะย่อตัวลงจากระดับสูงในเดือนสิงหาคม
ตลาดบิลเล็ตอะลูมิเนียม SMM: ในเดือนกรกฎาคม อัตราการเดินเครื่องของบิลเล็ตอะลูมิเนียมเพิ่มขึ้น 1.1 จุดเปอร์เซ็นต์จากเดือนก่อนหน้าเป็น 58.3% และเพิ่มขึ้นอย่างมาก 5.2 จุดเปอร์เซ็นต์เมื่อเทียบกับปีก่อนหน้า โดยได้รับแรงหนุนจากผลการดำเนินงานที่แข็งแกร่งของค่าธรรมเนียมการแปรรูปบิลเล็ตอะลูมิเนียมในไตรมาส 2...
4 ชั่วโมงที่แล้ว
แผ่นดินไหวขนาด 7.7 ในอินโดนีเซียส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างน้อย โดยแรงสั่นสะเทือนแทบเป็นศูนย์
12 ชั่วโมงที่แล้ว
แผ่นดินไหวขนาด 7.7 ในอินโดนีเซียส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างน้อย โดยแรงสั่นสะเทือนแทบเป็นศูนย์
อ่านเพิ่มเติม
แผ่นดินไหวขนาด 7.7 ในอินโดนีเซียส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างน้อย โดยแรงสั่นสะเทือนแทบเป็นศูนย์
แผ่นดินไหวขนาด 7.7 ในอินโดนีเซียส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างน้อย โดยแรงสั่นสะเทือนแทบเป็นศูนย์
ข้อเสนอแนะการติดตาม SMM: แผ่นดินไหวขนาด 7.7 บนเกาะฟลอเรส ประเทศอินโดนีเซีย ส่งผลกระทบต่อห่วงโซ่อุตสาหกรรมอะลูมิเนียมค่อนข้างจำกัด ในด้านการกระจายกำลังการผลิต บอกไซต์ อะลูมินา และกำลังการผลิตอะลูมิเนียมส่วนใหญ่กระจุกตัวอยู่ทางตะวันตกของอินโดนีเซีย โดยทั่วไปอยู่ห่างจากศูนย์กลางแผ่นดินไหวมากกว่า 1,400 กม.; แม้แต่โรงถลุงอะลูมิเนียมที่ใกล้ที่สุด—Sulawesi Morowali Huachin Aluminum—ก็อยู่ห่างราว 624 กม. ซึ่งยังอยู่นอกระยะความเสียหาย 300 กม. เมื่อประกอบกับความสูงคลื่นสึนามิต่ำกว่า 0.4 เมตร แรงกระแทกด้านอุปทานจริงแทบเป็นศูนย์ ด้านราคา อาจสะท้อนแรงกระเพื่อมเชิงอารมณ์ระยะสั้นเพียง 0–1% มากที่สุด ซึ่งคาดว่าจะคลี่คลายภายใน 1–3 วัน โดยไม่เปลี่ยนแนวโน้มระยะกลาง
12 ชั่วโมงที่แล้ว
ดีทีไอฟิลิปปินส์วางแผนบังคับรับรองผลิตภัณฑ์อะลูมิเนียม เพื่อการันตีมาตรฐานคุณภาพและความปลอดภัย
14 Aug 2026 22:40
ดีทีไอฟิลิปปินส์วางแผนบังคับรับรองผลิตภัณฑ์อะลูมิเนียม เพื่อการันตีมาตรฐานคุณภาพและความปลอดภัย
อ่านเพิ่มเติม
ดีทีไอฟิลิปปินส์วางแผนบังคับรับรองผลิตภัณฑ์อะลูมิเนียม เพื่อการันตีมาตรฐานคุณภาพและความปลอดภัย
ดีทีไอฟิลิปปินส์วางแผนบังคับรับรองผลิตภัณฑ์อะลูมิเนียม เพื่อการันตีมาตรฐานคุณภาพและความปลอดภัย
ตามรายงานของสื่อฟิลิปปินส์เมื่อวันที่ 12 กระทรวงการค้าและอุตสาหกรรมฟิลิปปินส์ (DTI) มีแผนผลักดันการจัดตั้งโครงการรับรองภาคบังคับสำหรับผลิตภัณฑ์อะลูมิเนียม ซึ่งกำหนดให้ผู้ประกอบการผลิตในฟิลิปปินส์ทั้งในประเทศและต่างชาติต้องขอใบอนุญาตด้านคุณภาพและความปลอดภัยอย่างเป็นทางการของฟิลิปปินส์ล่วงหน้า และใช้แนวทางการรับรองแบบ “หนึ่งโรงงาน หนึ่งใบรับรอง”
14 Aug 2026 22:40