[summary of SMM Morning meeting] the arrival of electrolytic aluminum is increasing and the demand is slightly weak. the supply of goods in the spot market was slightly loose yesterday.

เผยแพร่แล้ว: Jul 22, 2020 09:59 (GMT+8)

SMM internal aluminum morning meeting minutes on July 22nd: basic metals rose across the board yesterday. Lomalco closed at $1699 a tonne yesterday, down 2.23 per cent, up $37 per tonne, while Shanghai Aluminium's main 2008 contract rose Rmb150,150, or 1.05 per cent. The dollar index fell 0.64 per cent to 95.186.

Macro aspect: 1) according to the real-time statistics released by Johns Hopkins University in the United States, as of July 22, 2020, there were 14835470 confirmed cases and 613710 deaths worldwide. Among them, there were 3884988 confirmed cases and 141817 deaths in the United States. (bearish) 2) the Bureau of Statistics said on Tuesday that there was a budget deficit of 35.5 billion pounds in June, bringing borrowing to a record 127.9 billion pounds in the first three months of the fiscal year, and the debt / GDP ratio reached 99.6 percent, the highest since 1961. Jia Xing, vice president and secretary general of the China Nonferrous Metals Industry Association, pointed out on the 21st that China's non-ferrous metals industry showed a trend of bottoming out and recovery in the first half of this year, and is expected to maintain a trend of recovery in the second half of this year. In the first half of the year, the added value of China's non-ferrous metals industry fell 4.1 per cent from the same period last year to 0.7 per cent year-on-year growth, returning to positive growth; the output of non-ferrous metals was 29.282 million tons, up 2.9 per cent from the same period (lidocaine)

Fundamentals: 1) Bureau of Statistics: in June 2020, the national aluminum output was 5.565 million tons, with a cumulative output of 26.458 million tons, an increase of 20.70% over the same period last year and a cumulative increase of 7.80%. In June 2020, the national output of aluminum alloy was 822000 tons, with a cumulative output of 4.144 million tons, an increase of 11.80 percent over the same period last year and a cumulative increase of 1.00 percent. In June 2020, China produced 3.015 million tons of electrolytic aluminum, with a cumulative output of 17.889 million tons, an increase of 0.80 percent over the same period last year and a cumulative increase of 1.70 percent. (negative) 2) Alumina: in the spot market, electrolytic aluminum mills and traders are in a wait-and-see mood to the previous sharp rise in aluminum prices and rapidly rising alumina quotations, and some holding traders have lowered their quotations, but the actual transaction size of the market is very limited. In the short term, we need to continue to pay attention to the changes of downstream purchasing intention, and in the long run, we need to pay attention to the marginal changes in (neutral) 3) according to the data of the Federation of passengers, the wholesale sales of passenger cars in the first half of the year were 7.667 million, down 22.9% from the same period last year, and the retail sales were 7.709 million, down 22.5% from the same period last year. The passenger car market is expected to decline by 11% in 2020 compared with the same period last year. (bullish)

Yesterday, the spot price of aluminum ingots in Wuxi area was 14400mur14420 yuan / ton, and that in Shanghai area was 14390mur14410 yuan / ton, which was 90 yuan / ton lower than the absolute price of the previous day. The spot water price in the market was around 180mur200 yuan / ton, which was about 60 yuan / ton lower than yesterday, and the price in Hangzhou area was between 14420 and 14440 yuan / ton. Due to the increase in arrival and weaker consumption, the supply of goods in the East China market yesterday was obviously more relaxed than that of the previous day, and the shippers were more active, with more brands quoted, but under the background that the procurement plan of a large household was less than 10,000 tons, the middleman's willingness to receive goods was relatively mediocre, and the trading between the two sides was flat, and the heat of transaction dropped obviously after 11:00. Downstream on-demand delivery, some traders feedback, because yesterday's prices are lower than yesterday, stack the day before the replenishment is not much, the purchase volume increased yesterday. This morning, spot transactions focused on rising water around 150 yuan / ton in the same month.

Summary: in the macro aspect, under the background of continuing to implement positive and prudent fiscal and monetary policies to promote economic recovery, the domestic non-ferrous metals industry has ushered in a good trend. From a fundamental point of view, the output of aluminum, aluminum alloy and other downstream branch products in the electrolytic aluminum industry chain in June ushered in a large increase. The downstream demand is OK. The supply of electrolytic aluminum in society has eased slightly recently, and warehouse receipt inventory is still low. On the whole, the price of electrolytic aluminum is still supported by fundamentals, and it is expected that the trend of aluminum price will still be strong in the short term in the future.

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
3 ชั่วโมงที่แล้ว
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
อ่านเพิ่มเติม
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
โรงงานรีดอะลูมิเนียมขั้นสูงของเหอหนานอี้รุ่ยเริ่มเดินเครื่องผลิต มุ่งขยายตลาดระดับไฮเอนด์
เมื่อวันที่ 20 กันยายน โรงรีดหยาบแผ่นหนาของโครงการผลิตอัจฉริยะวัสดุใหม่ฐานอะลูมิเนียมกำลังการผลิต 720,000 ตันต่อปี ของบริษัท เหอหนาน อี้รุ่ย นิวแมทีเรียลส์ เทคโนโลยี จำกัด ได้เริ่มเดินเครื่องผลิตอย่างเป็นทางการ โครงการนี้มีมูลค่าการลงทุนรวม 1.5 พันล้านหยวน โดยใช้พื้นที่โรงงานเดิมในการสร้างสายการรีดร้อนต่อเนื่อง “1+4” ระดับแนวหน้าของโลก พร้อมอุปกรณ์แปรรูปอะลูมิเนียมชั้นนำในอุตสาหกรรม เช่น เตาเผาแบบผลัก โครงการยังได้สร้างระบบอินเทอร์เน็ตอุตสาหกรรมที่สามารถตรวจสอบแบบเรียลไทม์และควบคุมแบบพลวัตของพารามิเตอร์การผลิตหลัก เช่น แรงรีดและอุณหภูมิ ซึ่งช่วยรับประกันคุณภาพที่เสถียรของผลิตภัณฑ์อะลูมิเนียมระดับไฮเอนด์ และเพิ่มส่วนแบ่งตลาดของผลิตภัณฑ์มูลค่าเพิ่มสูงอย่างต่อเนื่อง
3 ชั่วโมงที่แล้ว
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
3 ชั่วโมงที่แล้ว
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
อ่านเพิ่มเติม
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
กินีขยายความร่วมมือด้านเหมืองแร่กับเกลนคอร์ มุ่งเพิ่มรายได้และการพัฒนาอุตสาหกรรม
กินีมีแผนขยายความร่วมมือกับเกลนคอร์ไปสู่การกลั่นอะลูมินา พลังงาน ทองคำ และโลหะพื้นฐาน โดยมุ่งเพิ่มรายได้จากเหมืองแร่ ส่งเสริมการแปรรูปในประเทศและการพัฒนาอุตสาหกรรมจากทรัพยากรแร่ และเสริมสร้างความร่วมมือกับตลาดและบริษัทเหมืองแร่ระหว่างประเทศในจีน ตะวันออกกลาง และภูมิภาคอื่น ๆ
3 ชั่วโมงที่แล้ว
ติงเฟิง อลูมิเนียม เริ่มก่อสร้างเฟส 2 ตั้งเป้ากำลังการผลิตปีละ 200,000 ตันในกัมพูชา
3 ชั่วโมงที่แล้ว
ติงเฟิง อลูมิเนียม เริ่มก่อสร้างเฟส 2 ตั้งเป้ากำลังการผลิตปีละ 200,000 ตันในกัมพูชา
อ่านเพิ่มเติม
ติงเฟิง อลูมิเนียม เริ่มก่อสร้างเฟส 2 ตั้งเป้ากำลังการผลิตปีละ 200,000 ตันในกัมพูชา
ติงเฟิง อลูมิเนียม เริ่มก่อสร้างเฟส 2 ตั้งเป้ากำลังการผลิตปีละ 200,000 ตันในกัมพูชา
เมื่อวันที่ 21 กันยายน พิธีวางศิลาฤกษ์เฟส 2 (โครงการ A3) ของบริษัท Dingfeng Aluminum Manufacturing (Cambodia) Co., Ltd. ซึ่งเป็นบริษัทในเครือ Dihang Group ได้จัดขึ้น ตั้งอยู่ในเขตเศรษฐกิจพิเศษถนนหมายเลข 6 จังหวัดกำปงจาม ประเทศกัมพูชา Dingfeng Aluminum ดำเนินธุรกิจหลักด้านการวิจัยและพัฒนาการผลิตแท่งอะลูมิเนียมอัลลอยด์ระดับไฮเอนด์ โพรไฟล์อะลูมิเนียมระดับไฮเอนด์ และผลิตภัณฑ์สนับสนุนยานยนต์พลังงานใหม่ พร้อมด้วยกระบวนการผลิตและอุปกรณ์ครบวงจรครอบคลุมการหลอมและการหล่อ การรีดขึ้นรูป การชุบอโนไดซ์ การแปรรูปเชิงลึก การกลึงความละเอียดสูง และการปรับสภาพพื้นผิว เมื่อเฟส 2 เดินเครื่องเต็มกำลัง กำลังการผลิตต่อปีจะสูงถึง 200,000 ตัน มูลค่าผลผลิตต่อปีสูงถึง 700 ล้านดอลลาร์สหรัฐ เฟส 2 (โครงการ A3) มีแผนประกอบด้วยโรงงานแปรรูปยานยนต์พลังงานใหม่ขนาด 24,340 ตร.ม. (อาคารโครงสร้างเหล็กชั้นเดียว) โรงงานรีดขึ้นรูปขนาด 15,291 ตร.ม. และสิ่งอำนวยความสะดวกสนับสนุน เช่น อาคารสำนักงาน ป้อมยาม และห้องจ่ายไฟฟ้า
3 ชั่วโมงที่แล้ว