[SMM Hot Roll] New production capacity has been launched one after another or become "the last straw to crush spot prices"?

เผยแพร่แล้ว: Oct 14, 2019 18:08
After the National Day, the resumption of production and the increase of new production will lead to the increase of supply pressure in the later stage.

In October, the demand side was in the traditional peak demand season (compared with the off-season this year), while on the supply side, with the increase of environmental protection and production restrictions in various regions during the National Day, the output of steel mills fell, and the planned output of mainstream hot rolling mills fell 3.37% month-on-month in October, according to SMM. However, spot prices have not rebounded as expected, but have continued to fall since October, and the positive Sino-US consultations have failed to give a strong boost to spot prices, mainly due to two factors. First, during the National Day period, increase the pressure of market inventory; second, the new production line has been put into production, coupled with the poor performance of car data, resulting in a pessimistic market mentality.

 

Supply side pressure: during the National Day period, the steel mill resources are still being shipped normally, resulting in the continuous accumulation of hot rolling inventory and the increase of market inventory pressure. And the reduction of limited production by steel enterprises during the National Day period has not yet played a role in alleviating the pressure of market supply (reflected in the time difference in the market). At the same time, the steel mill learned that even if the document requires an extension of the production restriction time, the strict implementation of the production restriction is only the National Day stage, so the overall impact is not as expected, so even if the reduction is reflected in the market in the middle and late ten days, it is difficult to alleviate the market supply pressure.

 

Market mentality: in this year's hot rolling overcapacity, demand is generally weak and the macroeconomic environment is depressed, the market mentality continues to be weak. In addition, even if we enter the peak season, demand is still not prosperous, and new production capacity is still constantly put into production, supply pressure continues to increase, thus aggravating the market pessimism, spot prices have been affected by this many times after the overfall is difficult to rebound.

 

At the same time, after the National Day, the resumption of production and the increase of new production will lead to the increase of supply pressure in the later stage. According to the feedback of steel plant research, in addition to a small number of steel mills have rolling line maintenance (Baotou Iron and Steel, Angang, WISCO), the production of other steel mills has basically returned to normal, coupled with the current hot rolling production is still profitable (most steel enterprises Maori 100-200 yuan / ton), the production enthusiasm of steel enterprises will not be reduced, so the subsequent hot rolling output will be in a steady state of increase. In addition, the new capacity production line has been a more concerned point in the market. According to SMM research, this part of the production will increase further in November, when the heating season production limit is not clear, and previous documents show that there is a relaxation compared with last year, supply-side pressure is expected to continue to increase.

 

The specific feedback is as follows.

Shougang: 5500 blast furnace and 1780 rolling line were added in August, and the hot rolling output is expected to be 9-100000 tons in October.

Donghua: the new 1580 rolling line in August is still in the trial rolling stage, with a hot rolling output of 300-500 tons per day, and the probability is expected to be less than 1000 tons per day this year.

Shenglong Metallurgy: 1780 rolling line is expected to be put into production by the end of October, the equipment is basically ready, and the new product promotion meeting is planned to be held at the end of October.

Fuding Yaxin: the 1750 rolling line is expected to be put into production in December and is still in the preparatory stage.

 

In addition, from a regional point of view, the spot price in the South China market is high, steel enterprises are willing to put in, and the weather is gradually turning cold and northern demand is gradually restrained, so in the case of synchronous increase in new production, the total amount of steel going south will increase one after another and is expected to be higher than the same period last year, so the supply pressure in the follow-up South China market may only increase. The spot price in the East China market is now low, not only is the willingness of steel enterprises to put in low, traders in the case of hanging upside down (Shanghai upside down 6070 yuan / ton as of today), the enthusiasm for ordering is also weak, coupled with the demand situation is relatively stable and stable deviation, so even if the hot rolling output of steel enterprises increases in the fourth quarter, it is expected that the supply pressure in the South China market will not increase greatly.

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
ออสเตรเลียทบทวนภาษีตอบโต้การทุ่มตลาดเหล็กชุบสังกะสีจากอินเดีย มาเลเซีย เวียดนาม ท่ามกลางข้อกังวลเรื่องสังกะสี
11 Sep 2026 18:30
ออสเตรเลียทบทวนภาษีตอบโต้การทุ่มตลาดเหล็กชุบสังกะสีจากอินเดีย มาเลเซีย เวียดนาม ท่ามกลางข้อกังวลเรื่องสังกะสี
อ่านเพิ่มเติม
ออสเตรเลียทบทวนภาษีตอบโต้การทุ่มตลาดเหล็กชุบสังกะสีจากอินเดีย มาเลเซีย เวียดนาม ท่ามกลางข้อกังวลเรื่องสังกะสี
ออสเตรเลียทบทวนภาษีตอบโต้การทุ่มตลาดเหล็กชุบสังกะสีจากอินเดีย มาเลเซีย เวียดนาม ท่ามกลางข้อกังวลเรื่องสังกะสี
เมื่อวันที่ 9 กันยายน 2026 ออสเตรเลียได้เริ่มการทบทวนมาตรการตอบโต้การทุ่มตลาดรอบพระอาทิตย์ตกครั้งที่สองสำหรับเหล็กแผ่นเคลือบสังกะสีจากอินเดีย มาเลเซีย และเวียดนาม และแยกต่างหากได้เริ่มการทบทวนมาตรการตอบโต้การอุดหนุนสำหรับการนำเข้าจากอินเดีย การทบทวนครอบคลุมช่วงเดือนกรกฎาคม 2025 ถึงมิถุนายน 2026 โดยคาดว่ารายงานฉบับสุดท้ายจะออกภายในวันที่ 11 กุมภาพันธ์ 2027 เนื่องจากเหล็กเคลือบสังกะสีเป็นภาคการใช้งานปลายทางที่ใหญ่ที่สุดของสังกะสี มาตรการดังกล่าวจึงส่งผลโดยตรงต่อต้นทุนการส่งออกและความสามารถในการแข่งขัน ซึ่งอาจกระทบต่ออุปสงค์สังกะสีในประเทศและห่วงโซ่อุปทานของออสเตรเลีย การคงภาษีไว้จะช่วยคุ้มครองกำลังการผลิตเหล็กและการเคลือบผิวในประเทศได้ระดับหนึ่ง ขณะที่การยกเลิกอาจทำให้มีการนำเข้าสินค้าราคาต่ำเพิ่มขึ้นและส่งผลต่อการบริโภคสังกะสีในภูมิภาค ผลลัพธ์สุดท้ายยังขึ้นอยู่กับการวินิจฉัยของหน่วยงานผู้มีอำนาจ
11 Sep 2026 18:30
JCC Hongyuan Copper ทุ่มงบขยายกิจการ 200 ล้านดอลลาร์ ตั้งเป้าเพิ่มกำลังการผลิตเป็น 550,000 เมตริกตันภายในปี 2027
7 Sep 2026 15:43
JCC Hongyuan Copper ทุ่มงบขยายกิจการ 200 ล้านดอลลาร์ ตั้งเป้าเพิ่มกำลังการผลิตเป็น 550,000 เมตริกตันภายในปี 2027
อ่านเพิ่มเติม
JCC Hongyuan Copper ทุ่มงบขยายกิจการ 200 ล้านดอลลาร์ ตั้งเป้าเพิ่มกำลังการผลิตเป็น 550,000 เมตริกตันภายในปี 2027
JCC Hongyuan Copper ทุ่มงบขยายกิจการ 200 ล้านดอลลาร์ ตั้งเป้าเพิ่มกำลังการผลิตเป็น 550,000 เมตริกตันภายในปี 2027
โครงการขยายกำลังการผลิตแคโทดทองแดง 300,000 ตันต่อปี ของบริษัท JCC Hongyuan Copper ซึ่งเป็นบริษัทในเครือ Jiangxi Copper Corporation ได้เข้าสู่ขั้นตอนการประกาศรับฟังความคิดเห็นล่วงหน้าของรายงานการประเมินผลกระทบสิ่งแวดล้อมเมื่อวันที่ 4 กันยายน ด้วยเงินลงทุนรวมประมาณ 1.416 พันล้านหยวน โครงการมีแผนเริ่มก่อสร้างในเดือนกันยายน 2569 และแล้วเสร็จในเดือนธันวาคม 2570 เมื่อแล้วเสร็จ กำลังการผลิตรวมของ JCC Hongyuan จะเพิ่มจาก 250,000 ตัน เป็น 550,000 ตัน
7 Sep 2026 15:43
เงินเยนแข็งค่า USD/JPY ร่วงต่ำกว่า 159 ท่ามกลางกระแสคาดการณ์การแทรกแซงตลาด
3 Sep 2026 19:00
เงินเยนแข็งค่า USD/JPY ร่วงต่ำกว่า 159 ท่ามกลางกระแสคาดการณ์การแทรกแซงตลาด
อ่านเพิ่มเติม
เงินเยนแข็งค่า USD/JPY ร่วงต่ำกว่า 159 ท่ามกลางกระแสคาดการณ์การแทรกแซงตลาด
เงินเยนแข็งค่า USD/JPY ร่วงต่ำกว่า 159 ท่ามกลางกระแสคาดการณ์การแทรกแซงตลาด
[SMM รายงานพิเศษโลหะมีค่า] เงินเยนญี่ปุ่นพุ่งขึ้นอย่างรวดเร็วระหว่างการซื้อขายวันพุธ โดย USD/JPY ร่วงลงต่ำกว่า 159 และปิดลดลง 0.92% ที่ 158.69 กระตุ้นการคาดการณ์เรื่องการแทรกแซงค่าเงินของญี่ปุ่น ดัชนีดอลลาร์ก็ร่วงลงอย่างหนักเช่นกัน โดยสภาพแวดล้อมดอลลาร์ที่อ่อนค่าเป็นปัจจัยหนุนโลหะมีค่า
3 Sep 2026 19:00