[SMM thread analysis] supply and demand bistable, thread basic support still exists

เผยแพร่แล้ว: Oct 11, 2019 19:11 (GMT+8)

 

According to SMM research, in the case of maintenance and production restrictions have not yet cooled, the output of mainstream building materials steel mills in October was 0.45% lower than that in September. As far as the electric arc furnace is concerned, as of today, the operating rate of the electric arc furnace steel plant is 57%. Under the sustained strength of scrap prices, the return to production of the electric arc furnace steel plant is "disillusioned", which is 2% lower than that in mid-September. Therefore, overall, although according to SMM steel statistics, as of today, the reduction of building materials caused by the overhaul of the steel plant in October is 269700 tons less than that in September, and the thread supply side remained basically stable in October.

However, it is worth noting that, on the one hand, with the resumption of production in some maintenance steel mills in mid-and late October, coupled with the gradual fading of the impact of the "most stringent production restrictions" during the National Day period, the supply pressure on the market will increase slightly, on the other hand, the trend of thread prices between regions will show differentiation. Of which:

North China: due to strict production restrictions during the National Day period, coupled with the recent production restriction policy of "seamless connection", the production, shipment and arrival of steel mills have not yet fully returned to normal, and there is still a shortage of specifications, and the terminal demand is relatively stable, so the market mentality is relatively good, and the price support is also relatively stronger.

In Hunan, especially in Changsha, because the local mainstream steel mills "collectively" entered the state of maintenance and production reduction before the festival, the price of building materials also soared 450 yuan / ton under the influence of "shortage". However, "higher than cold", with the recovery of steel production and the inflow of resources in the surrounding low-price areas, the problem of shortage of specifications has been alleviated, the supply pressure is "doubled" than in the early stage, and the price in the later stage will also face greater downside risks.

In addition, according to SMM research, the supply side of southwest China is also under great pressure, especially in Sichuan due to the alleviation of the shortage of scrap resources, electric arc furnace steel mills have basically resumed production, and resources in Shanxi, Shaanxi and other places have also poured into the "peak season."

In addition, with the continuous fermentation of the impact of Wuxi viaduct collapse, recently, various regions have issued notice of strict investigation of overload, a number of steel mills have also responded one after another. Expectations of higher transport costs in the market have also increased.

As far as the areas that issued the notice of strict inspection and overloading are concerned: Tangshan surprise inspection-closure of Hong Kong for three days, however, due to the single-roll transport has been implemented for three months (the freight has increased from 7 yuan / ton to 13 yuan / ton), East China has been under strict investigation since last year, Ningbo, Hangzhou and other places began to implement single-coil transportation in July last year, so generally speaking, there is no great interference with the recent steel prices. In October, the supply side is stable, the demand side is still in the peak season, building materials prices are still strong support.

 

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
บริษัทย่อยเวสเทิร์นไมนิงได้รับใบอนุญาต 17 ปีสำหรับเหมืองโพลีเมทัลลิกในชิงไห่
22 Sep 2026 16:11 (GMT+8)
บริษัทย่อยเวสเทิร์นไมนิงได้รับใบอนุญาต 17 ปีสำหรับเหมืองโพลีเมทัลลิกในชิงไห่
อ่านเพิ่มเติม
บริษัทย่อยเวสเทิร์นไมนิงได้รับใบอนุญาต 17 ปีสำหรับเหมืองโพลีเมทัลลิกในชิงไห่
บริษัทย่อยเวสเทิร์นไมนิงได้รับใบอนุญาต 17 ปีสำหรับเหมืองโพลีเมทัลลิกในชิงไห่
เมื่อวันที่ 22 กันยายน บริษัทเวสเทิร์นไมนิงประกาศว่า บริษัทย่อยที่ถือหุ้นทั้งหมด ชิงไห่กานซินไมนิงดีเวลอปเมนต์ จำกัด (“กานซินไมนิง”) ได้รับใบอนุญาตทำเหมืองที่ออกโดยกรมทรัพยากรธรรมชาติมณฑลชิงไห่ เหมืองดังกล่าวมีชื่อว่า เหมืองเหล็กและโพลีเมทัลลิกเก๋เอ่อมู่ถูเหวินชาฮั่น ของบริษัทชิงไห่กานซินไมนิงดีเวลอปเมนต์ จำกัด ครอบคลุมแร่เหล็ก ทองแดง ทองคำ โมลิบดีนัม สังกะสี ตะกั่ว และเงิน เป็นแร่ที่ได้รับอนุญาตให้ทำเหมือง ใบอนุญาตทำเหมืองมีอายุตั้งแต่วันที่ 3 สิงหาคม 2026 ถึงวันที่ 30 สิงหาคม 2043
22 Sep 2026 16:11 (GMT+8)
โครงการ 7.4 พันล้านดอลลาร์สหรัฐของ Korea Zinc ในสหรัฐฯ ผ่านการประเมินสิ่งแวดล้อม เตรียมทดลองเดินเครื่องปี 2029
21 Sep 2026 17:02 (GMT+8)
โครงการ 7.4 พันล้านดอลลาร์สหรัฐของ Korea Zinc ในสหรัฐฯ ผ่านการประเมินสิ่งแวดล้อม เตรียมทดลองเดินเครื่องปี 2029
อ่านเพิ่มเติม
โครงการ 7.4 พันล้านดอลลาร์สหรัฐของ Korea Zinc ในสหรัฐฯ ผ่านการประเมินสิ่งแวดล้อม เตรียมทดลองเดินเครื่องปี 2029
โครงการ 7.4 พันล้านดอลลาร์สหรัฐของ Korea Zinc ในสหรัฐฯ ผ่านการประเมินสิ่งแวดล้อม เตรียมทดลองเดินเครื่องปี 2029
เมื่อวันที่ 21 กันยายน Korea Zinc ประกาศว่าโครงการผลิตในสหรัฐฯ มูลค่า 7.4 พันล้านดอลลาร์สหรัฐ ผ่านการประเมินผลกระทบสิ่งแวดล้อมแล้ว โรงงานมีกำหนดเริ่มทดลองเดินเครื่องในปี 2572 และเริ่มการผลิตเชิงพาณิชย์ในปีถัดไป โดยจะผลิตแร่สำคัญ 11 ชนิด โลหะนอกกลุ่มเหล็ก 12 ชนิด และกรดซัลฟิวริกระดับเซมิคอนดักเตอร์ เมื่อเดือนเมษายน Korea Zinc ระบุว่าได้เข้าซื้อโรงถลุงสังกะสีในท้องถิ่นและบริษัทที่เกี่ยวข้องอื่น ๆ เสร็จสิ้นแล้ว บริษัทมีแผนดำเนินโครงการโดยการขยายและปรับปรุงโรงงานเดิม
21 Sep 2026 17:02 (GMT+8)
ออสเตรเลียทบทวนภาษีตอบโต้การทุ่มตลาดเหล็กชุบสังกะสีจากอินเดีย มาเลเซีย เวียดนาม ท่ามกลางข้อกังวลเรื่องสังกะสี
11 Sep 2026 18:30 (GMT+8)
ออสเตรเลียทบทวนภาษีตอบโต้การทุ่มตลาดเหล็กชุบสังกะสีจากอินเดีย มาเลเซีย เวียดนาม ท่ามกลางข้อกังวลเรื่องสังกะสี
อ่านเพิ่มเติม
ออสเตรเลียทบทวนภาษีตอบโต้การทุ่มตลาดเหล็กชุบสังกะสีจากอินเดีย มาเลเซีย เวียดนาม ท่ามกลางข้อกังวลเรื่องสังกะสี
ออสเตรเลียทบทวนภาษีตอบโต้การทุ่มตลาดเหล็กชุบสังกะสีจากอินเดีย มาเลเซีย เวียดนาม ท่ามกลางข้อกังวลเรื่องสังกะสี
เมื่อวันที่ 9 กันยายน 2026 ออสเตรเลียได้เริ่มการทบทวนมาตรการตอบโต้การทุ่มตลาดรอบพระอาทิตย์ตกครั้งที่สองสำหรับเหล็กแผ่นเคลือบสังกะสีจากอินเดีย มาเลเซีย และเวียดนาม และแยกต่างหากได้เริ่มการทบทวนมาตรการตอบโต้การอุดหนุนสำหรับการนำเข้าจากอินเดีย การทบทวนครอบคลุมช่วงเดือนกรกฎาคม 2025 ถึงมิถุนายน 2026 โดยคาดว่ารายงานฉบับสุดท้ายจะออกภายในวันที่ 11 กุมภาพันธ์ 2027 เนื่องจากเหล็กเคลือบสังกะสีเป็นภาคการใช้งานปลายทางที่ใหญ่ที่สุดของสังกะสี มาตรการดังกล่าวจึงส่งผลโดยตรงต่อต้นทุนการส่งออกและความสามารถในการแข่งขัน ซึ่งอาจกระทบต่ออุปสงค์สังกะสีในประเทศและห่วงโซ่อุปทานของออสเตรเลีย การคงภาษีไว้จะช่วยคุ้มครองกำลังการผลิตเหล็กและการเคลือบผิวในประเทศได้ระดับหนึ่ง ขณะที่การยกเลิกอาจทำให้มีการนำเข้าสินค้าราคาต่ำเพิ่มขึ้นและส่งผลต่อการบริโภคสังกะสีในภูมิภาค ผลลัพธ์สุดท้ายยังขึ้นอยู่กับการวินิจฉัยของหน่วยงานผู้มีอำนาจ
11 Sep 2026 18:30 (GMT+8)