Macro Roundup (Jul 2)

เผยแพร่แล้ว: Jul 02, 2019 09:36 (GMT+8)
A roundup of global macroeconomic news last night and what is expected today

SHANGHAI, Jul 2 (SMM) – This is a roundup of global macroeconomic news last night and what is expected today.

Last night

The US dollar rose to two-week highs as US-China trade tensions eased after the world’s two largest economies agreed to restart trade talks. 

Base metals ended mostly lower as LME zinc lost 1.24%, lead slid 0.85%, copper fell 1%, aluminium dipped 0.14%, nickel declined 2.76%, while tin nudged up. SHFE zinc eased 1.58%, copper slipped 1.29%, tin fell 0.31%, aluminium went down 0.83%, nickel closed 2.26% lower, while lead advanced 0.03%.  

China’s manufacturing shrank unexpectedly in June, notching its worst reading since January, according to the Caixin/Markit survey results.

The Caixin/Markit factory purchasing managers’ index (PMI) for June stood at 49.4, compared with the expected 50.1. PMI readings above 50 indicate expansion, while those below that signal contraction.

The lacklustre reading was due to new orders falling into contractionary territory, pointing to shrinking domestic demand, said Zhengsheng Zhong, director of macroeconomic analysis at CEBM Group, a subsidiary of Caixin. 

“The gauge for new export orders also returned to contractionary territory, but was better than the levels seen from last April to last December. Front-loading by exporters was likely to support this gauge as the China-US trade relationship was under great uncertainty,” Zhong wrote in a report. 

“Overall, China’s economy came under further pressure in June. It’s crucial for policymakers to step up countercyclical policies. New types of infrastructure, high-tech manufacturing and consumption are likely to be the main policy focuses,” he added.

Manufacturing in the eurozone was weaker than forecast, as the manufacturing PMI fell for the fifth consecutive month, analysts at IHS Markit said on Monday.

The final eurozone manufacturing PMI was assessed at 47.6 for June, falling from the flash assessment of 47.8 for manufacturing released earlier in the month.

Despite reaching a four-month high, Germany remained the weakest performing nation at 45, with Austria, Spain, Ireland and Italy also recording PMI readings below 50, and only marginal growth recorded for the Netherlands.

Unemployment in Germany fell slightly in June compared to the previous month, data from the Federal Labour Office showed on Monday, but underemployment grew, pointing to a weakening in the economy.

Seasonally adjusted unemployment fell by 1,000 to 2.281 million compared to the month before. The unemployment rate remained at 5%.

According to the US manufacturing PMI report published by the IHS Markit, the business activity in the manufacturing sector in June expanded with the headline PMI ticking up to 50.6 from 50.5 in May.

"US manufacturers reported business conditions to have remained the toughest for nearly a decade in June. The past two months have seen the lowest readings since the height of the global financial crisis in 2009," commented by Chris Williamson, chief business economist at IHS Markit.

Separately, the US manufacturing PMI for June surveyed by the Institute for Supply Management (ISM) also beat market expectations. The index dipped to 51.7 from the prior reading of 52.1, but above the expected 51.

Day ahead

Germany will release data on its actual retail sales for May. The sixth OPEC and non-OPEC ministerial meeting will take place today in Vienna, Austria.

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
[SMM สรุปข่าวโลหะมีค่า]
13 ชั่วโมงที่แล้ว
[SMM สรุปข่าวโลหะมีค่า]
อ่านเพิ่มเติม
[SMM สรุปข่าวโลหะมีค่า]
[SMM สรุปข่าวโลหะมีค่า]
ตลาดโลหะกลุ่มแพลทินัมของจีนก้าวสำคัญสู่ความเป็นสากล ตั้งแต่วันที่ 28 กันยายนเป็นต้นไป สัญญาฟิวเจอร์สและออปชันแพลทินัมและแพลเลเดียมในตลาดซื้อขายล่วงหน้ากว่างโจว (GFEX) เปิดรับนักลงทุนต่างชาติที่มีคุณสมบัติเหมาะสม สัญญาดังกล่าวเปิดตัวเมื่อเดือนพฤศจิกายน 2568 และมีปริมาณการซื้อขายในประเทศขยายตัวอย่างต่อเนื่อง การมีส่วนร่วมจากสถาบันต่างประเทศคาดว่าจะช่วยเพิ่มสภาพคล่องของตลาดและเสริมสร้างอิทธิพลของจีนในการกำหนดราคาแพลทินัมและแพลเลเดียมในตลาดโลก
13 ชั่วโมงที่แล้ว
[SMM รายงานด่วนโลหะมีค่า]
13 ชั่วโมงที่แล้ว
[SMM รายงานด่วนโลหะมีค่า]
อ่านเพิ่มเติม
[SMM รายงานด่วนโลหะมีค่า]
[SMM รายงานด่วนโลหะมีค่า]
Valterra Platinum ระบุว่า การติดตั้งเซลล์ลอยแร่ Jameson ที่เหมือง Mogalakwena PGM ได้ช่วยประหยัดต้นทุน พลังงาน และคาร์บอนได้อย่างโดดเด่น การติดตั้งนี้ลดการเดินรถบรรทุกลงประมาณ 3,000 เที่ยวต่อปี ลดการใช้ไฟฟ้าในการถลุงลง 70.5 เมกะวัตต์ชั่วโมง และลดการปล่อย CO₂ ลงประมาณ 70,000 ตัน โดยประหยัดต้นทุนได้ปีละ 203 ล้านแรนด์ ประโยชน์เหล่านี้ยังไม่รวมผลได้เพิ่มเติมจากอัตราการนำโลหะกลับคืนที่สูงขึ้น
13 ชั่วโมงที่แล้ว
ธาริซานำเงินจากการออกหุ้นกู้คาโรเข้าบัญชีเอสโครว์
15 ชั่วโมงที่แล้ว
ธาริซานำเงินจากการออกหุ้นกู้คาโรเข้าบัญชีเอสโครว์
อ่านเพิ่มเติม
ธาริซานำเงินจากการออกหุ้นกู้คาโรเข้าบัญชีเอสโครว์
ธาริซานำเงินจากการออกหุ้นกู้คาโรเข้าบัญชีเอสโครว์
[SMM PGM Flash] Tharisa กล่าวเมื่อวันที่ 25 กันยายนว่า เงินสุทธิจากหุ้นกู้มีหลักประกันอายุ 5 ปี มูลค่า 300 ล้านดอลลาร์สหรัฐ ได้ถูกนำไปฝากในบัญชีเอสโครว์แล้ว หลังจากเงื่อนไขการชำระราคาหลักได้รับการปฏิบัติตาม หุ้นกู้ออกผ่าน Arxo Finance ที่ราคา 98% ของมูลค่าที่ตราไว้ มีอัตราดอกเบี้ย 11% Tharisa ตั้งใจจะใช้เงินที่ได้เพื่อทำให้โครงการ Karo Platinum ในซิมบับเวแล้วเสร็จ ภายใต้เงื่อนไขคงเหลือสำหรับการปล่อยเงิน ขั้นตอนเอสโครว์นี้ช่วยผลักดันการจัดหาเงินทุนสำหรับแหล่งโลหะกลุ่มแพลทินัมที่เสนอไว้บน Great Dyke ของซิมบับเว เงินยังไม่ถูกปล่อยให้กับ Tharisa และ Karo ยังไม่ใช่เหมืองที่สร้างเสร็จสมบูรณ์ บริษัทตั้งเป้าป้อนแร่ชุดแรกเข้าโรงโม่ของ Karo ในไตรมาสที่สี่ของปี 2027 ทั้งการเบิกใช้เงินกู้และเป้าหมายการดำเนินงานดังกล่าวยังคงอยู่ข้างหน้า
15 ชั่วโมงที่แล้ว