Global Steel Associations Condemn Overproduction

เผยแพร่แล้ว: May 25, 2016 08:55
​Global steel trade associations today released a statement urging the leaders of the G7 nations to take steps to address the current global steel overcapacity situation.
  • May 24, 2016

Global steel trade associations today released a statement urging the leaders of the G7 nations to take steps to address the current global steel overcapacity situation which is negatively affecting economies, industries and workers around the world.

The American Iron and Steel Institute, the Japan Iron and Steel Federation,Eurofer (the European Steel Association), Canadian Steel Producers Association,UK Steel, the German Steel Federation (WV-Stahl), Alliance des Minerais, Minéraux et Métaux (A3M), Federacciai (the Federation of the Italian Steel Companies), the Steel Manufacturers Association (SMA), the Committee on Pipe and Tube Imports (CPTI), the Specialty Steel Industry of North America (SSINA), and the European Steel Tube Association said:

“Government support measures and other policies have contributed to significant global excess capacity in steel, unfair trade and distortions in steel trade flows around the world. Among other things, these market-distorting government policies have prevented adequate industry adjustment in some markets in response to changes in global demand. This is an issue of concern in countries where government policies encourage steel capacity growth without regard to market signals, or where government actions sustain uneconomic or consistently loss-making steel plants that otherwise would exit the market.

“Steel producers in the G7 nations, and elsewhere around the world, highly appreciate intergovernmental attempts so far to cope with the global overcapacity issue, and urge their governments to take urgent action to address this global problem, building upon the work program outlined by high-level government representatives in Brussels in mid-April to address the overcapacity and adjustment challenges facing the steel industry,” the statement, in part, read.

“It is critical that all major steel-producing nations participate in efforts to eliminate trade-distorting policies that are contributing to the current steel crisis,” it continued. “Otherwise, as was noted at the OECD Steel Committee meeting in May 2015, ‘a failure to address or halt market distortions will result in subsidized and state-supported enterprises surviving at the expense of efficient companies operating in environments with minimal government support.’

“In this regard, we urge the G7 summit in Japan to discuss the need to maintain effective remedial measures, consistent with their WTO rights and obligations, against exports from countries in which market economy conditions do not prevail.”


คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
สต็อกดีบุก LME 4,890 ตัน ลดลง 230 ตัน; การขึ้นอัตราดอกเบี้ย FOMC เดือนกันยายนเกือบแน่นอน จับตาการตัดสินใจ [ข่าวเช้าดีบุก SMM]
1 ชั่วโมงที่แล้ว
สต็อกดีบุก LME 4,890 ตัน ลดลง 230 ตัน; การขึ้นอัตราดอกเบี้ย FOMC เดือนกันยายนเกือบแน่นอน จับตาการตัดสินใจ [ข่าวเช้าดีบุก SMM]
อ่านเพิ่มเติม
สต็อกดีบุก LME 4,890 ตัน ลดลง 230 ตัน; การขึ้นอัตราดอกเบี้ย FOMC เดือนกันยายนเกือบแน่นอน จับตาการตัดสินใจ [ข่าวเช้าดีบุก SMM]
สต็อกดีบุก LME 4,890 ตัน ลดลง 230 ตัน; การขึ้นอัตราดอกเบี้ย FOMC เดือนกันยายนเกือบแน่นอน จับตาการตัดสินใจ [ข่าวเช้าดีบุก SMM]
[SMM อัปเดตช่วงเช้าดีบุก: สต็อกดีบุก LME อยู่ที่ 4,890 ตัน ลดลง 230 ตัน; การปรับขึ้นอัตราดอกเบี้ย FOMC เดือนกันยายนเกือบแน่นอน จับตาการตัดสินใจ]
1 ชั่วโมงที่แล้ว
SHFE ดีบุกทรงตัวที่ 394,010 ลดลงเล็กน้อย 0.13% สต็อกดีบุก LME ลดลง 230 เมตริกตัน เหลือ 4,890 [สรุปการประชุมช่วงเช้าดีบุก SMM]
1 ชั่วโมงที่แล้ว
SHFE ดีบุกทรงตัวที่ 394,010 ลดลงเล็กน้อย 0.13% สต็อกดีบุก LME ลดลง 230 เมตริกตัน เหลือ 4,890 [สรุปการประชุมช่วงเช้าดีบุก SMM]
อ่านเพิ่มเติม
SHFE ดีบุกทรงตัวที่ 394,010 ลดลงเล็กน้อย 0.13% สต็อกดีบุก LME ลดลง 230 เมตริกตัน เหลือ 4,890 [สรุปการประชุมช่วงเช้าดีบุก SMM]
SHFE ดีบุกทรงตัวที่ 394,010 ลดลงเล็กน้อย 0.13% สต็อกดีบุก LME ลดลง 230 เมตริกตัน เหลือ 4,890 [สรุปการประชุมช่วงเช้าดีบุก SMM]
[SMM สรุปการประชุมช่วงเช้าตลาดดีบุก: ดีบุก SHFE ทรงตัวที่ 394,010 ลดลงเล็กน้อย 0.13% สต็อกดีบุก LME ลดลง 230 เมตริกตัน เหลือ 4,890]
1 ชั่วโมงที่แล้ว
การอัปเกรดโรงถลุงตะกั่วในภาคกลางของจีนล่าช้า การผลิตจะกลับมาดำเนินการในเดือนตุลาคม
16 ชั่วโมงที่แล้ว
การอัปเกรดโรงถลุงตะกั่วในภาคกลางของจีนล่าช้า การผลิตจะกลับมาดำเนินการในเดือนตุลาคม
อ่านเพิ่มเติม
การอัปเกรดโรงถลุงตะกั่วในภาคกลางของจีนล่าช้า การผลิตจะกลับมาดำเนินการในเดือนตุลาคม
การอัปเกรดโรงถลุงตะกั่วในภาคกลางของจีนล่าช้า การผลิตจะกลับมาดำเนินการในเดือนตุลาคม
【พลวัตโรงถลุงตะกั่ว】 เป็นที่เข้าใจกันว่าโรงถลุงตะกั่วปฐมภูมิขนาดกลางแห่งหนึ่งในภาคกลางของจีนได้ระบุว่าความคืบหน้าที่แท้จริงของการปรับปรุงและยกระดับเทคโนโลยีอุปกรณ์ตะกั่วด้วยไฟฟ้านั้นช้ากว่าที่คาดไว้ การอัปเกรดอุปกรณ์เดิมมีแผนจะแล้วเสร็จในเวลาประมาณหนึ่งเดือน แต่ในความเป็นจริงแล้วจะยากที่จะแล้วเสร็จก่อนสิ้นเดือนกันยายน ระบบถลุงตะกั่วคาดว่าจะกลับมาดำเนินการผลิตได้เร็วที่สุดในเดือนตุลาคม
16 ชั่วโมงที่แล้ว
Global Steel Associations Condemn Overproduction - Shanghai Metals Market (SMM)