Iron Ore Falls To 10-year Low, Raw Steels MMI Down

เผยแพร่แล้ว: Dec 09, 2015 17:27 (GMT+8)
Spot iron ore prices hit a fresh 10-year low after falling below $40 per metric last week.

by Raul de Frutos on DECEMBER 9, 2015

Spot iron ore prices hit a fresh 10-year low after falling below $40 per metric last week.

Weakening steel demand is causing a slump in finished products and raw materials prices. Our Raw Steel MMI didn’t take a break in December, falling 4.2% to 46 points, yet another all-time low.

Early this year, many believed that the steel industry would recover during the second half of the year, even steel companies’ 2Q15 better-than-expected-earnings results raised optimism of a possible recovery. We didn’t subscribe to this view. The slump in steel prices continues and the fiscal 3Q15 financial results of most steel companies failed to cheer up investors.

The market has seriously underestimated the demand erosion that the economic rebalancing in China has created.

Overcapacity Still an Issue

Steel producers are still waiting for demand to meet the overcapacity built over the past few years. In addition, almost a decade with borrowing costs near zero has lead to a situation where there is still new capacity yet to be built and also existing capacity that doesn’t close. Low-cost credit has permitted even unprofitable production to be maintained, and while production levels are well off their peaks, there have been few permanent capacity closures.

Chinese Producers

The excess of production is still a concern in China, given the high levels of debt that producers there are dealing with. While many steel companies are able to cover debt costs out of operating profits, other companies are still borrowing from one bank to pay the older debt to another.

In November, Chinese steelmaker Tangshan Songting Iron and Steel, with an annual capacity of 5 million metric tons, said it would cut output due to debt pressures. Despite China cutting interest rates, as demand and prices collapse, banks are starting to tighten lending to the steel sector and losses are stacking up. Many mills are having a hard time extending their loans while they lower steel prices in competition to get contracts. The plunge in Chinese steel profits and and prolonged worries over weak demand might force more and more Chinese producers to close, removing exports from the global market before we see a recovery in prices.

Steel prices, like the rest of base metals, were impacted in November by a strong dollar and the bearish sentiment that this adds to commodity markets. There are few to no indicators pointing to a recovery in steel prices anytime soon.

Source: Metalminer


คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
【แฟลช | PhotonLink ของ Coherent ปูทางสู่การขยายกำลังการผลิตอินเดียมฟอสไฟด์ (InP) เชิงพาณิชย์】
02 Oct 2026 14:34 (GMT+8)
【แฟลช | PhotonLink ของ Coherent ปูทางสู่การขยายกำลังการผลิตอินเดียมฟอสไฟด์ (InP) เชิงพาณิชย์】
อ่านเพิ่มเติม
【แฟลช | PhotonLink ของ Coherent ปูทางสู่การขยายกำลังการผลิตอินเดียมฟอสไฟด์ (InP) เชิงพาณิชย์】
【แฟลช | PhotonLink ของ Coherent ปูทางสู่การขยายกำลังการผลิตอินเดียมฟอสไฟด์ (InP) เชิงพาณิชย์】
โคฮีเรนต์เปิดตัว PhotonLink แพลตฟอร์มออปติกส์แบบบูรณาการสำหรับโครงสร้างพื้นฐาน AI ที่รวมเลเซอร์อินเดียมฟอสไฟด์ (InP) ซิลิคอนโฟโตนิกส์ ตัวตรวจจับ และโมดูลออปติคัล บริษัทเปิดเผยว่ามีโครงการ CPO มากกว่า 10 ราย โครงการ NPO มากกว่า 10 ราย และโครงการเชื่อมต่อชิปถึงชิปมากกว่า 5 โครงการ โดยมีลูกค้าหลักและข้อตกลงระยะยาวสำหรับทั้ง CPO และ NPO คาดว่ารายได้จะเริ่มเพิ่มขึ้นในไตรมาส 4 ปี 2026 โคฮีเรนต์ได้จัดส่งเลเซอร์ InP ไปแล้วกว่า 300 ล้านตัว และกำลังขยายกำลังการผลิต InP ขนาด 6 นิ้วเพื่อรองรับการเติบโตดังกล่าว กลุ่มลูกค้าในท่อส่งนี้ให้สัญญาณความต้องการเชิงพาณิชย์ที่ชัดเจนขึ้นสำหรับอุปกรณ์ InP และวัสดุต้นน้ำ แม้จะยังไม่มีการเปิดเผยกำลังการผลิตเพิ่มเติมและการบริโภคอินเดียม
02 Oct 2026 14:34 (GMT+8)
แท่นขุดเจาะที่สองของไนน์ไมล์เดินทางถึงทริแบ็ก–เวสต์เวดจ์แล้ว เพื่อทดสอบเป้าหมายแม่เหล็กไฟฟ้าเจ็ดจุด
02 Oct 2026 10:38 (GMT+8)
แท่นขุดเจาะที่สองของไนน์ไมล์เดินทางถึงทริแบ็ก–เวสต์เวดจ์แล้ว เพื่อทดสอบเป้าหมายแม่เหล็กไฟฟ้าเจ็ดจุด
อ่านเพิ่มเติม
แท่นขุดเจาะที่สองของไนน์ไมล์เดินทางถึงทริแบ็ก–เวสต์เวดจ์แล้ว เพื่อทดสอบเป้าหมายแม่เหล็กไฟฟ้าเจ็ดจุด
แท่นขุดเจาะที่สองของไนน์ไมล์เดินทางถึงทริแบ็ก–เวสต์เวดจ์แล้ว เพื่อทดสอบเป้าหมายแม่เหล็กไฟฟ้าเจ็ดจุด
Nine Mile Metals ประกาศว่าแท่นขุดเจาะแท่นที่สองได้เดินทางถึง Tribag–West Wedge ในรัฐนิวบรันสวิก ประเทศแคนาดาแล้ว โดยคาดว่าจะเริ่มการขุดเจาะที่ Tribag ในอีกไม่กี่วันข้างหน้า เป้าหมายแม่เหล็กไฟฟ้าที่จำลองไว้ 7 จุดมีความเกี่ยวข้องกับแหล่งแร่ตะกั่ว-สังกะสี Tribag และแหล่งแร่ทองแดง-ตะกั่ว-สังกะสี West Wedge การขุดเจาะแบบ Wedge ยังคงดำเนินต่อไปควบคู่กัน ณ วันที่ 21 กันยายน บริษัทได้เจาะหลุมเสร็จสิ้นแล้ว 18 หลุม รวมความยาว 4,934.50 เมตร จากแผนงานประจำปี 10,000 เมตร ตัวนำไฟฟ้ายังคงเป็นเป้าหมายทางธรณีฟิสิกส์ที่ต้องอาศัยการขุดเจาะเพื่อยืนยันแหล่งกำเนิด
02 Oct 2026 10:38 (GMT+8)
【ข่าวด่วน SMM】Masivo พบแนวแร่โพลีเมทัลลิกที่มีตะกั่ว-สังกะสี 32.50 เมตร ที่ Cerro Colorado
01 Oct 2026 10:06 (GMT+8)
【ข่าวด่วน SMM】Masivo พบแนวแร่โพลีเมทัลลิกที่มีตะกั่ว-สังกะสี 32.50 เมตร ที่ Cerro Colorado
อ่านเพิ่มเติม
【ข่าวด่วน SMM】Masivo พบแนวแร่โพลีเมทัลลิกที่มีตะกั่ว-สังกะสี 32.50 เมตร ที่ Cerro Colorado
【ข่าวด่วน SMM】Masivo พบแนวแร่โพลีเมทัลลิกที่มีตะกั่ว-สังกะสี 32.50 เมตร ที่ Cerro Colorado
มาซิโว ซิลเวอร์ รายงานผลวิเคราะห์จากหลุมเจาะ CC-26-001 ซึ่งเป็นหลุมแรกที่เซร์โร โกโลราโด รัฐโซโนรา ประเทศเม็กซิโก หลุมเจาะตัดผ่านชั้นแร่หนา 32.50 เมตร ที่ความลึก 226.30 ถึง 258.80 เมตร ให้เกรดเฉลี่ยสังกะสี 0.271% ตะกั่ว 0.141% และเงิน 7.0 กรัมต่อตัน ปัญหาทางเทคนิคทำให้การเจาะสิ้นสุดที่ความลึก 259.5 เมตร ขณะที่หลุมยังคงอยู่ในชั้นหินที่มีแร่
01 Oct 2026 10:06 (GMT+8)