[Steel Im&Ex] EU endorses higher AD duty on stainless steel imports

เผยแพร่แล้ว: Jul 31, 2015 17:43 (GMT+8)
The European Union (EU) member nations have upheld the imposition of higher anti-dumping duty on imported cold-rolled flat stainless steel from China and Taiwan.

By  Paul Ploumis 31 Jul 2015  Last updated at  04:56:18 GMT

BRUSSELS (Scrap Monster): The European Union (EU) member nations have upheld the imposition of higher anti-dumping duty on imported cold-rolled flat stainless steel from China and Taiwan. The duties are being imposed, following a complaint lodged in May 2014 and a subsequent investigation launched in June.

According to sources, the EU will charge tariffs ranging from 24.3% to 25.3% for sheet coil and strip imports from China. An AD duty of 6.8% will be charges for stainless steel imported from Taiwan. Majority of the EU-28 member states had supported imposition of high tariff during the vote held last week. The commission has time until September 25th to impose the tariffs. Meantime, Eurofer has withdrawn a parallel complaint into alleged subsidies for Chinese stainless steel producers. The complaint was withdrawn on the grounds that there is no possibility of further tariffs being imposed, as the present tariff itself is at the highest level possible.

As per estimates, the combined shipments of cold-rolled stainless steel by China and Taiwan during entire year 2013 had totaled 620 million euros ($686 million). The imports from these countries together accounted for 17% of the overall market. Also, figures indicate that imports from these two countries more than tripled during the period from 2010 to 2014. Eurofer notes that the stainless steel market in the region has not witnessed corresponding growth during the period, thereby squeezing the profit margins of domestic producers.

The prominent Chinese companies those are likely to be affected by the tariffs include Shanxi Taigang Stainless Steel Co and Baosteel Stainless Steel Co. Taiwanese manufacturers -Tang Eng Iron Works Co and Yieh United Steel Corp may also get affected due to the decision.

Analysts believe that the considerably high tariffs may cut the imports from these countries substantially.


คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
【แฟลช | PhotonLink ของ Coherent ปูทางสู่การขยายกำลังการผลิตอินเดียมฟอสไฟด์ (InP) เชิงพาณิชย์】
02 Oct 2026 14:34 (GMT+8)
【แฟลช | PhotonLink ของ Coherent ปูทางสู่การขยายกำลังการผลิตอินเดียมฟอสไฟด์ (InP) เชิงพาณิชย์】
อ่านเพิ่มเติม
【แฟลช | PhotonLink ของ Coherent ปูทางสู่การขยายกำลังการผลิตอินเดียมฟอสไฟด์ (InP) เชิงพาณิชย์】
【แฟลช | PhotonLink ของ Coherent ปูทางสู่การขยายกำลังการผลิตอินเดียมฟอสไฟด์ (InP) เชิงพาณิชย์】
โคฮีเรนต์เปิดตัว PhotonLink แพลตฟอร์มออปติกส์แบบบูรณาการสำหรับโครงสร้างพื้นฐาน AI ที่รวมเลเซอร์อินเดียมฟอสไฟด์ (InP) ซิลิคอนโฟโตนิกส์ ตัวตรวจจับ และโมดูลออปติคัล บริษัทเปิดเผยว่ามีโครงการ CPO มากกว่า 10 ราย โครงการ NPO มากกว่า 10 ราย และโครงการเชื่อมต่อชิปถึงชิปมากกว่า 5 โครงการ โดยมีลูกค้าหลักและข้อตกลงระยะยาวสำหรับทั้ง CPO และ NPO คาดว่ารายได้จะเริ่มเพิ่มขึ้นในไตรมาส 4 ปี 2026 โคฮีเรนต์ได้จัดส่งเลเซอร์ InP ไปแล้วกว่า 300 ล้านตัว และกำลังขยายกำลังการผลิต InP ขนาด 6 นิ้วเพื่อรองรับการเติบโตดังกล่าว กลุ่มลูกค้าในท่อส่งนี้ให้สัญญาณความต้องการเชิงพาณิชย์ที่ชัดเจนขึ้นสำหรับอุปกรณ์ InP และวัสดุต้นน้ำ แม้จะยังไม่มีการเปิดเผยกำลังการผลิตเพิ่มเติมและการบริโภคอินเดียม
02 Oct 2026 14:34 (GMT+8)
แท่นขุดเจาะที่สองของไนน์ไมล์เดินทางถึงทริแบ็ก–เวสต์เวดจ์แล้ว เพื่อทดสอบเป้าหมายแม่เหล็กไฟฟ้าเจ็ดจุด
02 Oct 2026 10:38 (GMT+8)
แท่นขุดเจาะที่สองของไนน์ไมล์เดินทางถึงทริแบ็ก–เวสต์เวดจ์แล้ว เพื่อทดสอบเป้าหมายแม่เหล็กไฟฟ้าเจ็ดจุด
อ่านเพิ่มเติม
แท่นขุดเจาะที่สองของไนน์ไมล์เดินทางถึงทริแบ็ก–เวสต์เวดจ์แล้ว เพื่อทดสอบเป้าหมายแม่เหล็กไฟฟ้าเจ็ดจุด
แท่นขุดเจาะที่สองของไนน์ไมล์เดินทางถึงทริแบ็ก–เวสต์เวดจ์แล้ว เพื่อทดสอบเป้าหมายแม่เหล็กไฟฟ้าเจ็ดจุด
Nine Mile Metals ประกาศว่าแท่นขุดเจาะแท่นที่สองได้เดินทางถึง Tribag–West Wedge ในรัฐนิวบรันสวิก ประเทศแคนาดาแล้ว โดยคาดว่าจะเริ่มการขุดเจาะที่ Tribag ในอีกไม่กี่วันข้างหน้า เป้าหมายแม่เหล็กไฟฟ้าที่จำลองไว้ 7 จุดมีความเกี่ยวข้องกับแหล่งแร่ตะกั่ว-สังกะสี Tribag และแหล่งแร่ทองแดง-ตะกั่ว-สังกะสี West Wedge การขุดเจาะแบบ Wedge ยังคงดำเนินต่อไปควบคู่กัน ณ วันที่ 21 กันยายน บริษัทได้เจาะหลุมเสร็จสิ้นแล้ว 18 หลุม รวมความยาว 4,934.50 เมตร จากแผนงานประจำปี 10,000 เมตร ตัวนำไฟฟ้ายังคงเป็นเป้าหมายทางธรณีฟิสิกส์ที่ต้องอาศัยการขุดเจาะเพื่อยืนยันแหล่งกำเนิด
02 Oct 2026 10:38 (GMT+8)
【ข่าวด่วน SMM】Masivo พบแนวแร่โพลีเมทัลลิกที่มีตะกั่ว-สังกะสี 32.50 เมตร ที่ Cerro Colorado
01 Oct 2026 10:06 (GMT+8)
【ข่าวด่วน SMM】Masivo พบแนวแร่โพลีเมทัลลิกที่มีตะกั่ว-สังกะสี 32.50 เมตร ที่ Cerro Colorado
อ่านเพิ่มเติม
【ข่าวด่วน SMM】Masivo พบแนวแร่โพลีเมทัลลิกที่มีตะกั่ว-สังกะสี 32.50 เมตร ที่ Cerro Colorado
【ข่าวด่วน SMM】Masivo พบแนวแร่โพลีเมทัลลิกที่มีตะกั่ว-สังกะสี 32.50 เมตร ที่ Cerro Colorado
มาซิโว ซิลเวอร์ รายงานผลวิเคราะห์จากหลุมเจาะ CC-26-001 ซึ่งเป็นหลุมแรกที่เซร์โร โกโลราโด รัฐโซโนรา ประเทศเม็กซิโก หลุมเจาะตัดผ่านชั้นแร่หนา 32.50 เมตร ที่ความลึก 226.30 ถึง 258.80 เมตร ให้เกรดเฉลี่ยสังกะสี 0.271% ตะกั่ว 0.141% และเงิน 7.0 กรัมต่อตัน ปัญหาทางเทคนิคทำให้การเจาะสิ้นสุดที่ความลึก 259.5 เมตร ขณะที่หลุมยังคงอยู่ในชั้นหินที่มีแร่
01 Oct 2026 10:06 (GMT+8)
[Steel Im&Ex] EU endorses higher AD duty on stainless steel imports - Shanghai Metals Market (SMM)