Overall market transactions were relatively sluggish, and domestic high-grade NPI prices fluctuated downward. [SMM Nickel Morning Briefing]

Опубликовано: Dec 31, 2024 09:13 (GMT+8)
[12.31 Nickel Morning Meeting Summary] Spot Premiums/Discounts: Mainstream spot premiums for Jinchuan No.1 nickel were quoted in the range of 3,400-3,500 yuan/mt, with an average premium of 3,450 yuan/mt, down by 50 yuan compared to the previous trading day. Russian nickel premiums/discounts were quoted in the range of 0 to 100 yuan/mt, with an average premium of -50 yuan/mt, up by 100 yuan compared to the previous trading day. In terms of futures...

12.31Nickel Morning Meeting Summary

Refined Nickel:

Spot Premiums/Discounts: The mainstream spot premium quotation range for Jinchuan Nickel No.1 was 3,400-3,500 yuan/mt, with an average premium of 3,450 yuan/mt, down 50 yuan compared to the previous trading day. The quotation range for Russian nickel was 0 to 100 yuan/mt, with an average premium of -50 yuan/mt, up 100 yuan compared to the previous trading day.

Futures: In the morning, nickel prices fluctuated downward at low levels, dropping 1,200 yuan to 124,540 yuan, down 0.95%.

Today, nickel prices fluctuated rangebound, down compared to the previous trading day. Jinchuan brand nickel premiums remained largely stable overall, but as the sentiment of short-term supply tightening gradually eased in the market, premiums showed slight loosening. Spot premiums/discounts for other nickel plate brands remained largely stable this month. Approaching year-end, overall market transactions were sluggish.

Price Spread With Nickel Sulphate: Today, nickel briquette prices were 123,600-124,000 yuan/mt, down 1,550 yuan/mt compared to the previous trading day's spot price. Nickel sulphate remained at a discount to refined nickel.

Nickel Sulphate:

On December 30, the SMM battery-grade nickel sulphate index price was 26,379 yuan/mt, with the quotation range for battery-grade nickel sulphate at 26,000-26,920 yuan/mt, and the average price remained unchanged from the previous day.

In terms of demand, there were some recent inquiries and transactions in the market, but overall, the nickel salt market was not active. In terms of supply, salt plants continued to stand firm on quotes. Overall, under the backdrop of weak demand from both buyers and sellers, nickel sulphate prices are expected to remain stable.

Nickel Pig Iron:

On December 30, the SMM 8-12% high-grade NPI average price was 937.5 yuan/mtu (ex-factory, tax included), down 2.5 yuan/mtu compared to the previous working day. Supply side, domestically, high-grade NPI prices fluctuated downward, with traditional smelters facing expanded losses, weakening production momentum. Combined with environmental inspections, production is expected to decline slightly. In Indonesia, raw material inventories at NPI smelters remained relatively sufficient. Coupled with some smelters maintaining partial profits and weak demand for high-grade nickel matte, the phenomenon of converting high-grade nickel matte to high-grade NPI persists, with Indonesian production expected to grow as anticipated. Demand side, the stainless steel market saw some improvement in spot digestion, and social inventory began destocking. However, as the January market sales cycle approaches, steel mills' raw material procurement demand remained sluggish, with intended prices showing a weak trend. Supported by costs, high-grade NPI prices are expected to remain stable with a weak trend in the short term.

Stainless Steel:

On December 30, stainless steel futures prices continued to weaken, and spot prices remained at low levels. As the year-end off-season deepened, a steel mill in South China further reduced its guidance price today, with 304 cold-rolled prices down by 100 yuan. Market confidence was insufficient, and pessimism persisted for the next month. In the morning, 304 cold-rolled prices in Wuxi were quoted at 12,950-13,200 yuan/mt, 304 HRC at 12,400-12,500 yuan/mt, 316L cold-rolled at 23,600-23,800 yuan/mt, 201J1 cold-rolled at 7,400-7,700 yuan/mt, and 430 cold-rolled at 7,150-7,450 yuan/mt. At 10:30 a.m., the SHFE SS2502 contract price was 12,980 yuan/mt, with Wuxi stainless steel spot premiums at 140-390 yuan/mt (spot trimmed edge = mill edge + 170 yuan/mt).

Заявление об источниках данных: За исключением общедоступной информации, все остальные данные обрабатываются SMM на основе общедоступной информации, рыночного общения и с опорой на внутреннюю базу данных и модели SMM. Они приведены только для справки и не являются рекомендациями для принятия решений.

По любым вопросам или для получения дополнительной информации, пожалуйста, свяжитесь: lemonzhao@smm.cn
Для получения дополнительной информации о доступе к нашим исследовательским отчётам обращайтесь:service.en@smm.cn
Связанные новости
[SMM Stainless Steel Flash] EU keeps CBAM de minimis threshold unchanged as certificate sale rules remain pending
2 минут назад
[SMM Stainless Steel Flash] EU keeps CBAM de minimis threshold unchanged as certificate sale rules remain pending
Читать далее
[SMM Stainless Steel Flash] EU keeps CBAM de minimis threshold unchanged as certificate sale rules remain pending
[SMM Stainless Steel Flash] EU keeps CBAM de minimis threshold unchanged as certificate sale rules remain pending
The European Commission's Directorate-General for Taxation and Customs Union (DG TAXUD) published its CBAM de minimis assessment on 30 September. For 1 April 2025 to 31 March 2026, it found that the 50-tonne single mass-based threshold exempted less than the statutory 1% limit of embedded emissions, so the threshold stays in place. Under the CBAM Regulation, the Commission must amend the threshold by delegated act if the value calculated under Annex VII deviates from the current one by more than 15 tonnes. The assessment did not publish the underlying calculation or methodology, and came later than the 30 April deadline set in the Regulation. DG TAXUD also issued a factsheet on CBAM certificates, but the delegated act on certificate sales, repurchase and fees has yet to be adopted and, according to industry sources, has slipped from the second quarter to the fourth. With certificate sales due to start on 1 February 2027 and Parliament and Council able to take up to four months to object, the rules risk not being in place in time. The Article 9 implementing regulation on crediting carbon prices paid in the country of origin has also been stuck at draft stage since May. For stainless steel importers, imports below 50 tonnes a year remain exempt, while those above the threshold still face uncertainty over certificate purchasing and origin-country carbon price credits, keeping CBAM cost calculations unsettled.
2 минут назад
[SMM Stainless Steel Flash] EU Q4 steel quotas fill within days as India overshoots stainless bar and tube caps
7 минут назад
[SMM Stainless Steel Flash] EU Q4 steel quotas fill within days as India overshoots stainless bar and tube caps
Читать далее
[SMM Stainless Steel Flash] EU Q4 steel quotas fill within days as India overshoots stainless bar and tube caps
[SMM Stainless Steel Flash] EU Q4 steel quotas fill within days as India overshoots stainless bar and tube caps
Just five days into the new EU steel quota period running from 1 October to 31 December, Commission data show several quotas for Türkiye, China, India, Australia, Taiwan (PoC), North Macedonia and "other countries" already exhausted, with a number of others more than 70% used. On the stainless side, India has exceeded both its quota for stainless bars and light sections and its quota for seamless stainless tubes, and in each case the volume waiting for customs clearance at EU ports exceeds the full quarterly allocation. Most of that material will therefore either wait for the next quarter or pay the 50% out-of-quota tariff. Indian bright bar export offers to Europe were already softening, with European buyers cautious over CBAM and quota uncertainty. With quotas filled at the opening, Indian stainless long product exports to the EU will be sharply constrained in Q4, forcing exporters to weigh price against quota access. The other exhausted categories are mostly carbon steel, with Türkiye exceeding multiple quotas including HRC, coated sheet, wire rod and welded pipe.
7 минут назад
[SMM Stainless Steel Flash] Экспортные цены на катанку из нержавеющей стали на Тайване (PoC) выросли до максимума более чем за год на фоне отстающих объёмов
9 минут назад
[SMM Stainless Steel Flash] Экспортные цены на катанку из нержавеющей стали на Тайване (PoC) выросли до максимума более чем за год на фоне отстающих объёмов
Читать далее
[SMM Stainless Steel Flash] Экспортные цены на катанку из нержавеющей стали на Тайване (PoC) выросли до максимума более чем за год на фоне отстающих объёмов
[SMM Stainless Steel Flash] Экспортные цены на катанку из нержавеющей стали на Тайване (PoC) выросли до максимума более чем за год на фоне отстающих объёмов
Цены на экспорт катанки из нержавеющей стали с Тайваня (КНР) продолжают расти и достигли самого высокого уровня более чем за год после значительного совокупного роста за последние семь месяцев. Рост стоимости никеля и другого сырья заставил заводы неоднократно повышать внутренние прейскурантные цены, что привело к росту экспортных цен у местных производителей катанки Walsin Lihwa и Yieh Hsing. Однако объёмы не поспевают за ценами: экспорт катанки с Тайваня (КНР) в январе–августе оставался ниже уровня аналогичного периода прошлого года. Участники рынка отмечают, что улучшение прибыли у этих двух компаний будет зависеть от роста экспортных объёмов наряду с повышением цен. Это также объясняет, почему Walsin Lihwa сохранила базовую цену на катанку из стали 304 в октябре без изменений и скорректировала только марки, содержащие медь и молибден: при слабых экспортных объёмах широкое повышение цен могло бы ещё больше подорвать конкурентоспособность downstream-экспорта. В центре внимания — цены на никель и вопрос о том, восстановится ли зарубежный спрос на катанку.
9 минут назад