SMM Morning Comment For SHFE Base Metals On July 8

Publicado: Jul 8, 2024 09:47
Fonte: SMM
Last Friday night, LME copper opened at $9,940.5/mt, rose initially to a high of $10,000/mt, then fluctuated downward to a low of $9,929.5/mt, rebounded at the end of the trading session, and finally closed at $9,970/mt, with a gain of 0.85%. Trading volume reached 24,000 lots, and open interest reached 328,000 lots.

SHANGHAI, July 8 (SMM) –
Copper
Last Friday night, LME copper opened at $9,940.5/mt, rose initially to a high of $10,000/mt, then fluctuated downward to a low of $9,929.5/mt, rebounded at the end of the trading session, and finally closed at $9,970/mt, with a gain of 0.85%. Trading volume reached 24,000 lots, and open interest reached 328,000 lots.
Last Friday night, the most-traded SHFE copper 2408 contract opened at 80,650 yuan/mt, initially touched a high of 80,800 yuan/mt, then fell to a low of 80,390 yuan/mt, consolidated at the end of the trading session, and finally closed at 80,640 yuan/mt, with a gain of 0.59%. Trading volume reached 41,000 lots, and open interest reached 199,000 lots.

Macro side, the US non-farm payrolls report further highlighted the cooling of the labour market, enhancing expectations of a US Fed rate cut in the coming months, and the US dollar index fell, which was bullish for copper prices. Fundamentals side, the rise in copper prices triggered market sentiment of fear of high prices, leading some downstream producers to increase their restocking, but as it is currently the off-season for consumption, the purchasing volume cannot sustain an increase. The continuous rise in copper prices is expected to hit market demand. Copper prices are expected to maintain high-level wide fluctuations.
Aluminum
Last Friday night, the most-traded SHFE aluminum 2408 contract opened at 20,400 yuan/mt, reached a high of 20,480 yuan/mt, a low of 20,365 yuan/mt, and closed at 20,415 yuan/mt, up 115 yuan/mt from the previous trading day, with a gain of 0.57%.
Last Friday, LME aluminum opened at $2,526.5/mt, reached a high of $2,557/mt, a low of $2,521.5/mt, and closed at $2,539.5/mt, up $12.5/mt from the previous closing price, with a gain of 0.49%.

Macro side, the US non-farm payrolls data further strengthened market expectations of a US Fed rate cut. Fundamentals side, domestic aluminum supply is increasing, with some capacity yet to be resumed. Downstream aluminum processing and end-user demand have entered the off-season, with operating rates declining. The aluminum market fundamentals lack driving factors, and short-term aluminum prices are expected to fluctuate. However, close attention should be paid to macro sentiment changes that may cause aluminum price volatility.
Lead
Last Friday night, LME lead opened at $2,226.5/mt, consolidated around the daily moving average during the Asian session, rose to $2,254/mt during the European session, and slightly pulled back before closing, finally closing at $2,241.5/mt, up $9.5/mt, with a gain of 0.43%.
Last Friday night, the most-traded SHFE lead 2408 contract opened at 19,755 yuan/mt, initially fell to a low of 19,570 yuan/mt, then rebounded and fluctuated upward to a high of 19,760 yuan/mt, and finally closed at 19,685 yuan/mt, down 10 yuan/mt, with a loss of 0.05%.

Zinc

Last Friday, LME zinc prices were $2,990.5/mt, dipping to $2,986.5/mt, then rising to a high of $3,022/mt, and finally closed at $3,000/mt, up $10/mt, an increase of 0.33%. Trading volume increased to 8,961 lots, and open interest was reduced by 2,201 lots to 233,000 lots. Last Friday, LME zinc recorded a bullish candlestick, with the upper Bollinger Band forming resistance. The US non-farm payrolls for June declined significantly compared to May, and the US unemployment rate for June unexpectedly rose to the highest level in two and a half years. The labour market cooled significantly, further strengthening market confidence in a rate cut, boosting LME zinc to continue running at high levels.
Last Friday, the most-traded 2408 SHFE zinc contract opened at 24,750 yuan/mt, dipping to 24,620 yuan/mt, then rising to a high of 24,765 yuan/mt, and finally closed at 24,675 yuan/mt, up 20 yuan/mt, an increase of 0.08%. Trading volume was reduced to 77,104 lots, and open interest increased by 1,386 lots to 88,928 lots. Last Friday, SHFE zinc recorded a bearish candlestick, with the 10-day moving average providing support below. Domestic and overseas zinc concentrate TCs continued to decline, providing bottom support for zinc prices. However, domestic consumption did not improve, and SHFE zinc remained in high-level fluctuations.
Tin
Last Friday night, the most-traded SHFE tin contract closed at 278,500 yuan/mt, up 2,430 yuan/mt, an increase of 0.88%.
Spot market transactions: During the morning session last Friday, traders' quotations for premiums and discounts of domestic tin ingot brands did not change much compared to recent days. Small brand tin ingot was at a discount of 400-500 yuan/mt against the 2408 contract, delivery brand was a discount of 0-500 yuan/mt against the 2408 contract, and Yunxi brand was at a premium of 200-400 yuan/mt over the 2408 contract. There were no quotations for imported tin brands. Last Friday morning, as SHFE tin prices fluctuated at high levels, most downstream producers adopted a wait-and-see stance, only purchasing a small amount for rigid demand. Most traders had sporadic transactions. Overall, the spot market transactions last Friday were relatively quiet.
Nickel
Last week, SHFE nickel prices continued to rise slightly, closing at 138,090 yuan/mt on Friday evening. The logic behind nickel prices has not changed significantly, and attention still needs to be paid to the impact of both macro factors and fundamentals. The rise in nickel prices last week can be attributed to two main points: First, LME strengthened restrictions on the delivery of Russian nickel, announcing a suspension on acceptance of refined nickel products from Norilsk Nickel PJSC's Harjavalta plant in Finland starting October 3. Second, domestic supply pressure eased temporarily due to increased exports. On the macro front, the Minutes released by the US Fed on July 3 indicated that the weak CPI in May supported the view of slowing inflation, but it would be inappropriate to cut rates before more clearly confirming that inflation is steadily moving towards the 2% target. Although Fed officials suggested a wait-and-see approach, they also acknowledged the slowdown in the US economy and the easing of price pressures. The PMI, labour market data, and trade data released on the same day were all lower than expected, further validating the trend of economic cooling and sparking rate cut expectations, attracting bulls into the market. Fundamentally, domestic spot supply remained limited. Driven by previous macro factors and the Indonesian RKAB incident, as well as the continued rise in the exchange rate of the dollar against RMB, overseas nickel prices have consistently been higher than domestic prices, prompting domestic refined nickel producers to continue exporting nickel plates. In summary, although the long-term expectation of oversupply remains unchanged, SHFE nickel prices have limited downward room in the short term, supported by improving SHFE/LME nickel price ratio and the fact that macro environment has not shifted obviously. It is expected that the most-traded SHFE nickel contract will reach 135,000-145,000 yuan/mt this week.

Declaração sobre a Fonte de Dados: Com exceção das informações publicamente disponíveis, todos os demais dados são processados pela SMM com base em informações publicamente disponíveis, comunicação de mercado e com base no modelo de base de dados interna da SMM. São apenas para referência e não constituem recomendações para a tomada de decisão.

Para quaisquer perguntas ou para obter mais informações, entre em contato: lemonzhao@smm.cn
Para mais informações sobre como aceder aos nossos relatórios de investigação, entre em contato:service.en@smm.cn
Notícias Relacionadas
ACG expande mina de sulfeto de Gediktepe e produz primeiros concentrados de cobre e zinco; produção total prevista para o fim de 2026
há 13 horas
ACG expande mina de sulfeto de Gediktepe e produz primeiros concentrados de cobre e zinco; produção total prevista para o fim de 2026
Leia mais
ACG expande mina de sulfeto de Gediktepe e produz primeiros concentrados de cobre e zinco; produção total prevista para o fim de 2026
ACG expande mina de sulfeto de Gediktepe e produz primeiros concentrados de cobre e zinco; produção total prevista para o fim de 2026
ACG Metals anunciou em 1º de setembro que sua mina Gediktepe, na Turquia, produziu seu primeiro concentrado de cobre em 31 de agosto, marcando o início da fase de ramp-up. A empresa aumentará progressivamente a capacidade de processamento e otimizará o desempenho da planta, com meta de produção plena até o final de 2026. A meta de produção anual em regime estável de Gediktepe é de 20.000 a 25.000 toneladas de cobre equivalente. O comunicado completo também confirmou que a mina produziu seu primeiro concentrado de zinco em agosto de 2026, embora a data específica e os volumes não tenham sido divulgados. A SMM estima a produção de zinco contido em concentrado da mina em aproximadamente 10.000 a 15.000 toneladas em 2026.
há 13 horas
[ Análise SMM ] Um guia visual para os relatórios semestrais de 2026 de 19 fundições de cobre
há 13 horas
[ Análise SMM ] Um guia visual para os relatórios semestrais de 2026 de 19 fundições de cobre
Leia mais
[ Análise SMM ] Um guia visual para os relatórios semestrais de 2026 de 19 fundições de cobre
[ Análise SMM ] Um guia visual para os relatórios semestrais de 2026 de 19 fundições de cobre
há 13 horas
MMG faz pedido de equipamentos de US$ 64 milhões para apoiar expansão da Khoemacau em Botsuana
há 15 horas
MMG faz pedido de equipamentos de US$ 64 milhões para apoiar expansão da Khoemacau em Botsuana
Leia mais
MMG faz pedido de equipamentos de US$ 64 milhões para apoiar expansão da Khoemacau em Botsuana
MMG faz pedido de equipamentos de US$ 64 milhões para apoiar expansão da Khoemacau em Botsuana
A Epiroc garantiu um pedido de aproximadamente SEK 610 milhões (US$ 64 milhões) da MMG Limited e de suas contratadas de mineração, China Huaye e 23MCC, para equipamentos de mineração subterrânea destinados a apoiar a expansão da mina de cobre Khoemacau, em Botsuana. O pedido inclui jumbos de perfuração frontal, perfuratrizes de produção, perfuratrizes para cabos de ancoragem, carregadeiras e caminhões subterrâneos, além de sistemas de controle remoto, peças de reposição, treinamento e suporte técnico no local. Os equipamentos apoiarão a expansão em curso da Khoemacau pela MMG, projetada para aumentar a capacidade de produção anual de aproximadamente 60.000 toneladas para 130.000 toneladas de cobre contido em concentrado. O projeto inclui a construção de uma nova planta de processamento de 4,5 Mt/ano, que elevará a capacidade total de moagem para mais de 8 Mt/ano, juntamente com o desenvolvimento da Zona 5 Norte, Mango e Zeta Nordeste. O primeiro concentrado de cobre da expansão é esperado para o primeiro semestre de 2028. A Epiroc informou que a entrega da nova frota subterrânea começará no quarto trimestre de 2026 e deverá ser concluída até o segundo trimestre de 2028, alinhando-se amplamente ao cronograma da expansão. A frota encomendada inclui jumbos de perfuração frontal Boomer, perfuratrizes de produção Simba, perfuratrizes para cabos de ancoragem Cabletec, carregadeiras Scooptram e caminhões subterrâneos Minetruck, com várias unidades equipadas para operação automatizada e por controle remoto. O pedido de equipamentos representa mais um marco de execução para a expansão já aprovada da Khoemacau, e não uma nova meta de produção. Com as aquisições em andamento e as entregas de equipamentos programadas até o segundo trimestre de 2028, o projeto continua avançando rumo ao aumento planejado pela MMG da capacidade de cobre em concentrado para 130.000 toneladas por ano. A expansão representa um aumento significativo planejado na capacidade de produção de cobre da Khoemacau no Cinturão de Cobre do Kalahari, em Botsuana.
há 15 horas
SMM Morning Comment For SHFE Base Metals On July 8 - Shanghai Metals Market (SMM)