SMM Morning Comment For SHFE Base Metals January 22

Publicado: Jan 22, 2024 09:52
Fonte: SMM
LME copper prices opened at $8326/mt and closed at $8380/mt in last Friday evening trading, a rise of 0.82%, with the low-end of $8301.5/mt and the high-end of $8391.5/mt.

SHANGHAI, January 22 (SMM) –
Copper
LME copper prices opened at $8326/mt and closed at $8380/mt in last Friday evening trading, a rise of 0.82%, with the low-end of $8301.5/mt and the high-end of $8391.5/mt. Trading volume was 18,000 lots, and open interest stood at 277,000 lots. The most active SHFE 2403 copper contract prices opened at 68000 yuan/mt and closed at 67900 yuan/mt last Friday evening, up 0.4%, with the high-end of 68080 yuan/mt and the low-end of 67810 yuan/mt. Trading volumes stood at 20,000 lots and open interest stood at 149,000 lots. On the macro front, the one-year U.S. inflation rate in January is expected to be 2.9%. Interest rate swap contracts show that the Federal Reserve's expectations for an interest rate cut in March have further dropped to 40%. The hawkish speeches of Federal Reserve officials will also hit copper prices. On the fundamentals, as of January 19, SMM copper inventories in major Chinese markets decreased 2,300 mt to 75,400 mt from last Monday, up 3,400 mt from the two Fridays ago. In terms of consumption, the downstream buyers replenished cargoes at lows in the off-season. It is expected that the downstream will gradually start pre-holiday stockpiling this week, and the oversupply situation may improve. The premium will rise slightly. The copper prices will meet resistance due to depressed expectations over Fed rate cuts.
Aluminum
Last Friday’s night session, the most-traded SHFE 2403 aluminum contract opened at 18,690 yuan/mt, with its lowest and highest at 18,630 yuan/mt and 18,715 yuan/mt before closing at 18,665 yuan/mt, up 5 yuan/mt or 0.03%. LME aluminum opened at $2,172/mt last Friday, with high and low at $2,182/mt and $2,158.5/mt respectively before closing at $2,172.5/mt, an increase of $4.5/mt or 0.21%.
From a macro perspective, MoM surge in US retail sales in December exceeded market expectations and stood at 0.6% (0.40% expected). Sales of motor vehicles, personal health care and catering still maintained high YoY growth. Residential consumption were resilient. The market's expectations for Fed’s interest rate cut in first quarter fell back, the US dollar index rebounded, and commodities were under pressure. Domestically, China’s GDP grew by 5.2% in 2023. In December, total retail sales increased by 7.4% YoY, and the growth rate of added value in industries above the designated size hit a 22-month high. Real estate remained weak, manufacturing investment rebounded, and the overall macroeconomic atmosphere at home and abroad was weak. In terms of fundamentals, domestic aluminium supply has entered a stable period, overseas primary aluminium import windows continue to open, and the net import volume of primary aluminium remains at a high level, impacting domestic primary aluminium to a certain extent. Domestic primary aluminium social inventories may enter a seasonal inventory accumulation cycle at the end of the month, but considering the industry's aluminium liquid conversion rate of around 70%, it is expected that the total inventory before the holidays this year will be far lower than the same period last year. In the short term, the macroeconomic data at home and abroad perform poorly amid market pessimism, and domestic aluminium downstream industries are entering the off-season, which will put pressure on aluminium prices.
Lead
LME lead opened at $2075/mt and rose during the Asian trading hours last Friday. During the European trading hours, LME lead briefly hit the highest point at $2110/mt, closing up 1.47% at $2108/mt.
The most active SHFE 2403 lead contract prices opened at 16455 yuan/mt last evening, and closed at 16535 yuan/mt, an increase of 1.07%, with the high-end of 16545 yuan/mt and the low-end of 16410 yuan/mt.
Zinc
Last Friday, LME zinc prices opened at US$2,469.5/ton. During the European trading session, LME zinc prices trended rapidly downward and tested as low as US$2,454/ton and reached a high of US$2,485/ton, finally closing at US$2,473/ton, up US$7/ton, or 0.28%. Trading volume decreased by 2362 lots to 8048 lots, open interest increased by 2033 lots to 209,000 lots. LME zinc inventory decreased by 2075 tons to 202050 tons, a decrease of 1.02%. The one-year U.S. inflation rate is expected to be 2.9% lower than the forecast value, which is superimposed on the initial value of the University of Michigan Consumer Confidence Index in January of 78.8. The Fed officials' hawkish speech once again suppressed the market's interest rate cut expectations.
The most interest-traded SHFE 2403 zinc contract opened at 20700 yuan/mt last Friday before rallying to a peak of 20825 yuan/mt. It eventually settled at 20740 yuan/mt, up 25 yuan/mt or 0.12%. Trading volume decreased 55809 to 36907 lots, and open interest gained by 457 lots to 90224 lots. The decline in domestic inventories and pre-holiday stockpiling supported SHFE zinc prices.
Tin
SHFE 2402 tin contract fell to 213,200 yuan/mt at last Friday’s night session. The contract closed at 213,790 yuan/mt, up 0.18%. Last Friday, spot premiums and discounts in domestic spot market for various tin ingot brands did not change much. Small brand tin ingots were offered at discounts of 500 yuan/mt and premiums of 100 yuan/mt over SHFE 2402 tin contract, versus spot discounts of 200 yuan/mt and premiums of 700 yuan/mt for delivery brands, premiums of 600-1000 yuan/mt for Yunxi brand, and discounts of 1000 yuan/mt imported brand tin ingots. Tin prices remained high last Friday, and downstream companies still maintained a wait-and-see attitude. Purchasing sentiment was relatively sluggish.
Nickel
SHFE nickel showed a relatively strong performance, reaching a peak of 129,730 yuan/mt. Nickel prices saw a slight widening compared to nickel sulphate prices last week, with the price difference maintained around 5,000 yuan/mt. Under the current price difference, the production of electrowinning nickel from externally sourced nickel sulphate remains in a loss-making state. Additionally, nickel sulphate is impacted by downstream inventory replenishment and production reduction. The coefficient of spot goods rose, and it is expected that the price difference between these two will narrow slightly in the future. On a macro level, the number of US weekly initial jobless claims dropped to a new low. This implies that there might be strong job growth in January, which could cause financial markets to reduce their expectations of a rate cut in March. The conflict in the Red Sea region continues to escalate, but considering the trade flow of nickel products, the Red Sea route is not the primary pathway for nickel transportation. Therefore, the impact on nickel prices is actually limited. From a fundamental perspective, firstly, on the raw material side, the reduction in production at First Quantum Minerals, coupled with the partial resumption of the Huafei project, has led the market to anticipate a rebound in nickel prices. Looking at inventory, both LME and domestic inventory are still in an accumulation phase last week, but the rate of accumulation slowed compared to before. The global total inventory is 748 mt, with the main accumulation in Asian. In terms of demand, looking at different industries, the electroplating industry saw a small increase in orders due to the peak season and pre-holiday inventory preparations. Additionally, there is a higher demand for nickel plates. In the alloy industry, due to pre-Spring Festival stockpiling, alloy factories experienced sporadic transactions last week. The trading atmosphere worsened compared to the start of the month. High nickel prices are causing a decrease in buying interest from downstream. Due to reduced production in 300 series stainless steel in January, steel mills decreased their demand for nickel raw materials. Therefore, the support for nickel demand is limited.

Declaração sobre a Fonte de Dados: Com exceção das informações publicamente disponíveis, todos os demais dados são processados pela SMM com base em informações publicamente disponíveis, comunicação de mercado e com base no modelo de base de dados interna da SMM. São apenas para referência e não constituem recomendações para a tomada de decisão.

Para quaisquer perguntas ou para obter mais informações, entre em contato: lemonzhao@smm.cn
Para mais informações sobre como aceder aos nossos relatórios de investigação, entre em contato:service.en@smm.cn
Notícias Relacionadas
ACG expande mina de sulfeto de Gediktepe e produz primeiros concentrados de cobre e zinco; produção total prevista para o fim de 2026
há 11 horas
ACG expande mina de sulfeto de Gediktepe e produz primeiros concentrados de cobre e zinco; produção total prevista para o fim de 2026
Leia mais
ACG expande mina de sulfeto de Gediktepe e produz primeiros concentrados de cobre e zinco; produção total prevista para o fim de 2026
ACG expande mina de sulfeto de Gediktepe e produz primeiros concentrados de cobre e zinco; produção total prevista para o fim de 2026
ACG Metals anunciou em 1º de setembro que sua mina Gediktepe, na Turquia, produziu seu primeiro concentrado de cobre em 31 de agosto, marcando o início da fase de ramp-up. A empresa aumentará progressivamente a capacidade de processamento e otimizará o desempenho da planta, com meta de produção plena até o final de 2026. A meta de produção anual em regime estável de Gediktepe é de 20.000 a 25.000 toneladas de cobre equivalente. O comunicado completo também confirmou que a mina produziu seu primeiro concentrado de zinco em agosto de 2026, embora a data específica e os volumes não tenham sido divulgados. A SMM estima a produção de zinco contido em concentrado da mina em aproximadamente 10.000 a 15.000 toneladas em 2026.
há 11 horas
[ Análise SMM ] Um guia visual para os relatórios semestrais de 2026 de 19 fundições de cobre
há 11 horas
[ Análise SMM ] Um guia visual para os relatórios semestrais de 2026 de 19 fundições de cobre
Leia mais
[ Análise SMM ] Um guia visual para os relatórios semestrais de 2026 de 19 fundições de cobre
[ Análise SMM ] Um guia visual para os relatórios semestrais de 2026 de 19 fundições de cobre
há 11 horas
MMG faz pedido de equipamentos de US$ 64 milhões para apoiar expansão da Khoemacau em Botsuana
há 13 horas
MMG faz pedido de equipamentos de US$ 64 milhões para apoiar expansão da Khoemacau em Botsuana
Leia mais
MMG faz pedido de equipamentos de US$ 64 milhões para apoiar expansão da Khoemacau em Botsuana
MMG faz pedido de equipamentos de US$ 64 milhões para apoiar expansão da Khoemacau em Botsuana
A Epiroc garantiu um pedido de aproximadamente SEK 610 milhões (US$ 64 milhões) da MMG Limited e de suas contratadas de mineração, China Huaye e 23MCC, para equipamentos de mineração subterrânea destinados a apoiar a expansão da mina de cobre Khoemacau, em Botsuana. O pedido inclui jumbos de perfuração frontal, perfuratrizes de produção, perfuratrizes para cabos de ancoragem, carregadeiras e caminhões subterrâneos, além de sistemas de controle remoto, peças de reposição, treinamento e suporte técnico no local. Os equipamentos apoiarão a expansão em curso da Khoemacau pela MMG, projetada para aumentar a capacidade de produção anual de aproximadamente 60.000 toneladas para 130.000 toneladas de cobre contido em concentrado. O projeto inclui a construção de uma nova planta de processamento de 4,5 Mt/ano, que elevará a capacidade total de moagem para mais de 8 Mt/ano, juntamente com o desenvolvimento da Zona 5 Norte, Mango e Zeta Nordeste. O primeiro concentrado de cobre da expansão é esperado para o primeiro semestre de 2028. A Epiroc informou que a entrega da nova frota subterrânea começará no quarto trimestre de 2026 e deverá ser concluída até o segundo trimestre de 2028, alinhando-se amplamente ao cronograma da expansão. A frota encomendada inclui jumbos de perfuração frontal Boomer, perfuratrizes de produção Simba, perfuratrizes para cabos de ancoragem Cabletec, carregadeiras Scooptram e caminhões subterrâneos Minetruck, com várias unidades equipadas para operação automatizada e por controle remoto. O pedido de equipamentos representa mais um marco de execução para a expansão já aprovada da Khoemacau, e não uma nova meta de produção. Com as aquisições em andamento e as entregas de equipamentos programadas até o segundo trimestre de 2028, o projeto continua avançando rumo ao aumento planejado pela MMG da capacidade de cobre em concentrado para 130.000 toneladas por ano. A expansão representa um aumento significativo planejado na capacidade de produção de cobre da Khoemacau no Cinturão de Cobre do Kalahari, em Botsuana.
há 13 horas
SMM Morning Comment For SHFE Base Metals January 22 - Shanghai Metals Market (SMM)