The epidemic situation has improved, major European car factories have resumed production, and the resumption time for most factories in the United States has not yet been determined.

Publicado: May 08, 2020 15:41 (GMT+8)

SMM5, March 8: due to the unprecedented impact on the global auto industry due to the new crown epidemic, various countries have experienced varying degrees of shutdown of automobile factories, benefiting from China's rapid and effective epidemic control measures. According to information from the Ministry of Industry and Information Technology, as early March, the reinstatement rate of major domestic automakers has reached 90%, and the employee reinstatement rate has reached 70%.

Due to the lack of timely prevention and control of the epidemic in foreign countries, coupled with loose measures, the number of virus infections in Europe and the United States has soared in a short period of time, indirectly affecting the production of automobiles. Most of the world's large automakers are developed countries such as Europe, the United States, Japan and South Korea. Compared with China, foreign car factories have been hit even harder. At one point, more than 150 factories around the world were temporarily closed in April.

As the epidemic prevention and control in European countries achieved phased results, epidemic prevention measures have been gradually relaxed, and some car factories resumed production in April.

On April 20, with the resumption of work at Volkswagen's Zweicao factory, it has gradually opened the curtain on the resumption of work at the European car factory, and the Zweicao factory will also have Volkswagen's new pure electric cars off the line, marking the beginning of a new era for Volkswagen. But production capacity is much lower than normal, producing 50 vehicles a day, 1/3 of what it was before the shutdown. Delivery of the model is scheduled to begin this summer.

Earlier, the president of the Volkswagen union said it was a very clear signal for the industry as a whole to restart. Car factories that have been shut down since March will resume work one after another as the number of new confirmed cases of pneumonia in Europe and the United States slows down.

According to data released by the Robert Koch Institute of the German Agency for Disease Control and Prevention on the 6th, as of 00:00 on the same day, Germany had 947 new confirmed cases, a total of 164807 confirmed cases, 165 new deaths, 6996 cumulative deaths, and 2300 new cured cases, with a cumulative cure of 137400 cases. At the same time, the German federal government and state governments reached a new agreement on the 6th to further relax restrictions to deal with the new crown epidemic, but retain the provisions on maintaining social distance and wearing masks.

Several factories under German brands were reopened in April as a result of relaxed epidemic prevention measures. Volkswagen's Bratislava plant in Slovakia also reopened on April 20, the Wolfsburg plant was reopened on April 27, and Volkswagen's main factories in Europe have largely resumed production.

Daimler, the parent company of Mercedes-Benz, has allowed powertrain plants in Stuttgart and Berlin to take the lead in resuming production since April 20. As of April 30, major German factories, including the Sindfengen general plant and the Bremen plant, had resumed work.

BMW had previously announced in early April that it would extend the shutdown period to April 30. BMW's Dingfen plant in Bavaria is expected to resume work on May 11, while BMW's most important production sites, including the Munich plant, the Leipzig plant and the mini-plant in Oxford, UK, will gradually resume production after May 18.

French car company Renault restarted production plans at its Forlan plant on April 27th. The factory's main model is the electric car Zoe, which beat Tesla Model 3 to become the top seller of electric cars in 2019 with a subsidy of less than 19000 euros. Renault's Dacia brand is as early as April 21 to facilitate a full resumption of work in Romania.

On May 7, local time, the cumulative number of confirmed cases of New Crown pneumonia in the United States was the largest in the world, with more than 1.29 million cases, reaching 1291222 cases, and more than 76000 cases of death, reaching 76894 cases. It is reported that with the Trump White House administration blindly adhering to the policy of reviving the economy, the whole society of the United States is gradually resuming the policy of social blockade, and US university experts predict that the number of people infected with the new crown pneumonia in the United States will continue to rise. In addition, New York Governor Cuomo also said that Trump's full recovery of the economy, and even the lifting of the ban on wearing masks, will pose a greater epidemic challenge for the United States.

After some efforts in Europe, some car factories finally returned to work, but the epidemic in the United States is still serious. according to relevant reports, since General Motors, Ford, Fiat Chrysler and other car companies in the United States stopped production in March, they are striving for a partial resumption of production on May 18. The automakers set out to work with the United Auto Workers Union to develop a set of safety rules to prevent the epidemic, but details have not yet been worked out.

SMM-- China Tungsten Industry Market and Application Summit Forum

Seminar on the Application of cemented Carbide Market in China

On July 8, Zhuzhou, China cordially invites you to discuss the great plans of the industry.

Scan the code to sign up for this meeting

Declaração sobre a Fonte de Dados: Com exceção das informações publicamente disponíveis, todos os demais dados são processados pela SMM com base em informações publicamente disponíveis, comunicação de mercado e com base no modelo de base de dados interna da SMM. São apenas para referência e não constituem recomendações para a tomada de decisão.

Para quaisquer perguntas ou para obter mais informações, entre em contato: lemonzhao@smm.cn
Para mais informações sobre como aceder aos nossos relatórios de investigação, entre em contato:service.en@smm.cn
Notícias Relacionadas
Aterian reporta maiores vendas de minério 3T em Ruanda; margens de negociação permanecem estimativas
02 Oct 2026 16:26 (GMT+8)
Aterian reporta maiores vendas de minério 3T em Ruanda; margens de negociação permanecem estimativas
Leia mais
Aterian reporta maiores vendas de minério 3T em Ruanda; margens de negociação permanecem estimativas
Aterian reporta maiores vendas de minério 3T em Ruanda; margens de negociação permanecem estimativas
[SMM Flash de Tântalo] Os resultados intercalares da Aterian, divulgados a 30 de setembro, mostram £1,341 milhões de receitas de vendas de tântalo e outros minérios nos seis meses até 30 de junho de 2026, acima dos £20.000 do ano anterior. O lucro bruto foi de £522.000, enquanto o grupo registou um prejuízo antes de impostos de £568.000. O seu negócio de comércio no Ruanda mobilizou cerca de 2,18 milhões de dólares em capital de giro através de compras em joint venture. A administração avaliou as vendas potenciais dessas compras em 2,78 milhões de dólares, mas advertiu que a avaliação nocional não constitui receita reconhecida adicional. O lucro bruto de trading implícito de 602.000 dólares é também uma estimativa da administração, dependente de vendas concluídas, ensaios, preços realizados, custos e da alocação de lucros da joint venture. A Aterian afirmou que as inspeções de rastreabilidade limitaram os fornecedores e os volumes. Detinha £131.000 em caixa a 30 de junho; a sua expectativa de expansão dos volumes de trading a partir do quarto trimestre continua dependente da execução e do financiamento.
02 Oct 2026 16:26 (GMT+8)
Os pontos de amostragem da Tusker no Malawi apontam para a dominância da ilmenita
02 Oct 2026 16:23 (GMT+8)
Os pontos de amostragem da Tusker no Malawi apontam para a dominância da ilmenita
Leia mais
Os pontos de amostragem da Tusker no Malawi apontam para a dominância da ilmenita
Os pontos de amostragem da Tusker no Malawi apontam para a dominância da ilmenita
[SMM Titânio Flash] A Tusker Minerals informou em 30 de setembro que a amostragem de acompanhamento em seu projeto Mzimba, no norte do Malawi, alterou sua interpretação geológica. O titânio magnético excedeu o equivalente de rutilo calculado em 112 das 149 amostras regionais de solo, apontando para um sistema dominado por ilmenita com rutilo localizado. Trinta e três amostras de canal de poço raso não mostraram rutilo de alto teor persistindo em profundidade. A Tusker afirmou que os resultados não sustentam um programa imediato de perfuração focado em rutilo nas anomalias da Fase 1. O resultado enfraquece o caso específico de exploração de rutilo premium sugerido por amostras selecionadas anteriormente. Ele não estabelece um recurso mineral nem demonstra que a ilmenita poderia ser extraída de forma lucrativa. A Tusker reavaliará seu modelo geológico antes de decidir sobre trabalhos adicionais em Mzimba; seu foco de capital e técnico de curto prazo permanece em Camarões. A mistura mineral e a continuidade do teor ainda precisam ser estabelecidas antes que o potencial de matéria-prima do projeto possa ser avaliado.
02 Oct 2026 16:23 (GMT+8)
【Flash | PhotonLink da Coherent prepara o terreno para uma expansão comercial do fosfeto de índio (InP)】
02 Oct 2026 14:34 (GMT+8)
【Flash | PhotonLink da Coherent prepara o terreno para uma expansão comercial do fosfeto de índio (InP)】
Leia mais
【Flash | PhotonLink da Coherent prepara o terreno para uma expansão comercial do fosfeto de índio (InP)】
【Flash | PhotonLink da Coherent prepara o terreno para uma expansão comercial do fosfeto de índio (InP)】
A Coherent lançou o PhotonLink, uma plataforma de óptica integrada para infraestrutura de IA que incorpora lasers de fosfeto de índio (InP), fotônica de silício, detectores e módulos ópticos. A empresa divulgou mais de 10 engajamentos de CPO, mais de 10 engajamentos de NPO e mais de cinco projetos de conectividade chip a chip, com clientes-âncora e acordos de longo prazo garantidos tanto para CPO quanto para NPO. A receita deve começar a crescer no quarto trimestre de 2026. A Coherent já enviou mais de 300 milhões de lasers de InP e está expandindo sua capacidade de fabricação de InP de 6 polegadas para suportar o aumento da demanda. O pipeline de clientes fornece um sinal de demanda comercial mais claro para dispositivos de InP e materiais a montante, embora a capacidade adicional e o consumo de índio não tenham sido divulgados.
02 Oct 2026 14:34 (GMT+8)