[SMM Hot Roll] New production capacity has been launched one after another or become "the last straw to crush spot prices"?

Publicado: Oct 14, 2019 18:08
After the National Day, the resumption of production and the increase of new production will lead to the increase of supply pressure in the later stage.

In October, the demand side was in the traditional peak demand season (compared with the off-season this year), while on the supply side, with the increase of environmental protection and production restrictions in various regions during the National Day, the output of steel mills fell, and the planned output of mainstream hot rolling mills fell 3.37% month-on-month in October, according to SMM. However, spot prices have not rebounded as expected, but have continued to fall since October, and the positive Sino-US consultations have failed to give a strong boost to spot prices, mainly due to two factors. First, during the National Day period, increase the pressure of market inventory; second, the new production line has been put into production, coupled with the poor performance of car data, resulting in a pessimistic market mentality.

 

Supply side pressure: during the National Day period, the steel mill resources are still being shipped normally, resulting in the continuous accumulation of hot rolling inventory and the increase of market inventory pressure. And the reduction of limited production by steel enterprises during the National Day period has not yet played a role in alleviating the pressure of market supply (reflected in the time difference in the market). At the same time, the steel mill learned that even if the document requires an extension of the production restriction time, the strict implementation of the production restriction is only the National Day stage, so the overall impact is not as expected, so even if the reduction is reflected in the market in the middle and late ten days, it is difficult to alleviate the market supply pressure.

 

Market mentality: in this year's hot rolling overcapacity, demand is generally weak and the macroeconomic environment is depressed, the market mentality continues to be weak. In addition, even if we enter the peak season, demand is still not prosperous, and new production capacity is still constantly put into production, supply pressure continues to increase, thus aggravating the market pessimism, spot prices have been affected by this many times after the overfall is difficult to rebound.

 

At the same time, after the National Day, the resumption of production and the increase of new production will lead to the increase of supply pressure in the later stage. According to the feedback of steel plant research, in addition to a small number of steel mills have rolling line maintenance (Baotou Iron and Steel, Angang, WISCO), the production of other steel mills has basically returned to normal, coupled with the current hot rolling production is still profitable (most steel enterprises Maori 100-200 yuan / ton), the production enthusiasm of steel enterprises will not be reduced, so the subsequent hot rolling output will be in a steady state of increase. In addition, the new capacity production line has been a more concerned point in the market. According to SMM research, this part of the production will increase further in November, when the heating season production limit is not clear, and previous documents show that there is a relaxation compared with last year, supply-side pressure is expected to continue to increase.

 

The specific feedback is as follows.

Shougang: 5500 blast furnace and 1780 rolling line were added in August, and the hot rolling output is expected to be 9-100000 tons in October.

Donghua: the new 1580 rolling line in August is still in the trial rolling stage, with a hot rolling output of 300-500 tons per day, and the probability is expected to be less than 1000 tons per day this year.

Shenglong Metallurgy: 1780 rolling line is expected to be put into production by the end of October, the equipment is basically ready, and the new product promotion meeting is planned to be held at the end of October.

Fuding Yaxin: the 1750 rolling line is expected to be put into production in December and is still in the preparatory stage.

 

In addition, from a regional point of view, the spot price in the South China market is high, steel enterprises are willing to put in, and the weather is gradually turning cold and northern demand is gradually restrained, so in the case of synchronous increase in new production, the total amount of steel going south will increase one after another and is expected to be higher than the same period last year, so the supply pressure in the follow-up South China market may only increase. The spot price in the East China market is now low, not only is the willingness of steel enterprises to put in low, traders in the case of hanging upside down (Shanghai upside down 6070 yuan / ton as of today), the enthusiasm for ordering is also weak, coupled with the demand situation is relatively stable and stable deviation, so even if the hot rolling output of steel enterprises increases in the fourth quarter, it is expected that the supply pressure in the South China market will not increase greatly.

Declaração sobre a Fonte de Dados: Com exceção das informações publicamente disponíveis, todos os demais dados são processados pela SMM com base em informações publicamente disponíveis, comunicação de mercado e com base no modelo de base de dados interna da SMM. São apenas para referência e não constituem recomendações para a tomada de decisão.

Para quaisquer perguntas ou para obter mais informações, entre em contato: lemonzhao@smm.cn
Para mais informações sobre como aceder aos nossos relatórios de investigação, entre em contato:service.en@smm.cn
Notícias Relacionadas
Australia Reviews Anti-Dumping Duties on Galvanized Steel from India, Malaysia, Vietnam Amid Zinc Concerns
11 Sep 2026 18:30
Australia Reviews Anti-Dumping Duties on Galvanized Steel from India, Malaysia, Vietnam Amid Zinc Concerns
Leia mais
Australia Reviews Anti-Dumping Duties on Galvanized Steel from India, Malaysia, Vietnam Amid Zinc Concerns
Australia Reviews Anti-Dumping Duties on Galvanized Steel from India, Malaysia, Vietnam Amid Zinc Concerns
On September 9, 2026, Australia initiated its second sunset review of anti-dumping measures on galvanized steel sheet from India, Malaysia and Vietnam, and separately launched a sunset review of countervailing measures on imports from India. The review covers July 2025-June 2026, with the final report expected by February 11, 2027. As galvanized steel is the largest end-use sector for zinc, the measures directly affect export costs and competitiveness, potentially impacting Australia’s domestic zinc demand and supply chain. Maintaining the duties would provide some protection for domestic steel and coating capacity, while termination could increase low-priced imports and affect regional zinc consumption. The final outcome remains subject to the authorities’ determination.
11 Sep 2026 18:30
Projeto de expansão de US$ 200 milhões da JCC Hongyuan Copper visa aumentar a capacidade para 550.000 toneladas até 2027
7 Sep 2026 15:43
Projeto de expansão de US$ 200 milhões da JCC Hongyuan Copper visa aumentar a capacidade para 550.000 toneladas até 2027
Leia mais
Projeto de expansão de US$ 200 milhões da JCC Hongyuan Copper visa aumentar a capacidade para 550.000 toneladas até 2027
Projeto de expansão de US$ 200 milhões da JCC Hongyuan Copper visa aumentar a capacidade para 550.000 toneladas até 2027
O projeto de expansão de 300 mil toneladas/ano de cátodos de cobre da JCC Hongyuan Copper, subsidiária da Jiangxi Copper Corporation, entrou na fase de aviso público de pré-aprovação de sua avaliação de impacto ambiental em 4 de setembro, com investimento total de aproximadamente 1,416 bilhão de yuans. O projeto está previsto para iniciar a construção em setembro de 2026 e ser concluído em dezembro de 2027. Após a conclusão, a capacidade total da JCC Hongyuan saltará de 250 mil toneladas para 550 mil toneladas.
7 Sep 2026 15:43
Iene japonês sobe e USD/JPY cai abaixo de 159 em meio a especulações de intervenção
3 Sep 2026 19:00
Iene japonês sobe e USD/JPY cai abaixo de 159 em meio a especulações de intervenção
Leia mais
Iene japonês sobe e USD/JPY cai abaixo de 159 em meio a especulações de intervenção
Iene japonês sobe e USD/JPY cai abaixo de 159 em meio a especulações de intervenção
[SMM Expresso Metais Preciosos] O iene japonês disparou acentuadamente durante o pregão de quarta-feira, com o USD/JPY caindo abaixo de 159 e fechando em queda de 0,92%, a 158,69, alimentando especulações sobre intervenção cambial japonesa. O índice do dólar também caiu fortemente, e o ambiente de dólar mais fraco deu suporte aos metais preciosos.
3 Sep 2026 19:00