China’s copper smelting industry is seeing a growing divergence between continued expansion in nameplate capacity and feedstock-constrained output growth.
According to SMM data, China's refined copper production reached 1.086 million mt in October 2026, down 3.03% month-on-month, and is expected to decline further to 1.082 million mt in November. Scheduled maintenance at major smelters affected approximately 103,200 mt of production in October. Although some smelters have resumed operations following maintenance, persistent shortages of copper concentrates and scrap-derived copper anodes continue to constrain the recovery in refined copper output.
China currently does not face a shortage of smelting capacity. Instead, the real constraint on production growth is the availability of raw materials at economically viable costs. Copper concentrate supply has remained structurally tight, while the availability of supplementary feedstocks, including copper scrap, blister copper and copper anodes, is also limited. This has significantly reduced smelters' flexibility to adjust their feedstock mix and increase production.
Why Have Higher Concentrate Imports Failed to Ease Feedstock Tightness?
According to customs data compiled by SMM, China imported 2.482 million mt of copper concentrates in September 2026, down 1.04% month-on-month and 3.75% year-on-year. Although imports remained at relatively high levels, raw material demand from newly commissioned and expanded smelting capacity has grown at a faster pace, leaving spot copper concentrates available for open-market trading in short supply.
SMM's spot copper concentrate TC index has fallen to -US$247.68/dmt, marking another record low. Meanwhile, prices of sulfuric acid, a key by-product of copper smelting, have continued to decline. Revenue from sulfuric acid sales, which previously helped offset losses caused by low treatment charges, is weakening, adding further pressure to smelters' operating margins.
According to SMM, some smelters have already indicated their intention to reduce production and have informed customers of potential reductions in long-term contract deliveries. However, the actual scale of production cuts remains uncertain.
While scheduled maintenance does not necessarily indicate forced production cuts, persistent raw material shortages, deeply negative treatment charges and declining by-product revenue may prompt some smelters to extend maintenance periods or delay production restarts, potentially placing greater pressure on refined copper supply in the fourth quarter.
How Are Concentrate and Cathode Tightness Jointly Consuming Scrap?
Tight copper concentrate supply has increased smelters' demand for supplementary feedstocks. To maintain production, some smelters have stepped up purchases of blister copper, copper anodes, scrap-derived copper anodes and other suitable recycled copper materials. Although these feedstocks cannot directly replace copper concentrates on a large scale due to differences in processing requirements and production routes, their marginal value as supplementary raw materials increases when concentrate availability is constrained, intensifying competition for available supplies.
At the same time, limited recovery in refined copper production, tight spot availability and rising physical premiums have encouraged copper rod producers and other copper fabricators to increase purchases of high-grade copper scrap, particularly bare bright copper.
For some downstream manufacturers, bare bright copper can partially substitute for refined copper in production. As the spot procurement cost of refined copper rises, these companies become more willing to purchase high-grade copper scrap and accept higher procurement prices.
As a result, copper scrap demand is being supported by two separate channels. On one hand, smelters are increasing purchases of blister copper, copper anodes, scrap-derived copper anodes and other suitable copper scrap grades. On the other hand, copper fabricators are raising their consumption of bare bright copper and other high-grade recycled copper feedstocks.
Stronger demand from both segments has accelerated the drawdown of scrap inventories and reduced the volume of tradable materials available in the market.
According to customs data compiled by SMM, China's imports of recycled copper raw materials reached 236,600 mt in September, up 33.37% month-on-month, while copper anode imports rose 22.60% month-on-month to 79,000 mt. Meanwhile, some domestically generated copper scrap remains unable to enter the procurement channels of compliant enterprises due to incomplete VAT invoicing documentation.
This indicates that simultaneous tightness in copper concentrates and the refined copper spot market is driving both smelters and downstream fabricators to increase their purchases of different grades of recycled copper feedstocks.
With limited growth in new copper scrap generation, little prospect of a sustained surge in imports, and insufficient availability of scrap that meets compliance requirements, copper scrap inventories are being drawn down at a faster pace. These conditions are providing further support for recycled copper pricing coefficients to remain at elevated levels.
How Will the Dual Feedstock Shortage Affect the Scrap Market?
Slower growth in refined copper supply will increase fabricators’ focus on high-grade scrap that can be used directly in production. Recent shortages of VAT-invoiced material in China, high spot cathode premiums and disruptions to customs clearance for imported cargoes have already prompted Chinese buyers to raise their bids.
According to SMM market surveys, Millberry payabilities have risen to 99%–99.5%, while No.1 copper scrap has reached 98%–98.5% and No.2 copper scrap is around 96.5%. Some No.2 material containing gold and silver is quoted at payabilities close to 98%. Higher Chinese bids are also transmitting to international markets and strengthening overseas suppliers’ willingness to hold firm.
However, high copper prices, modest downstream orders and pressure on recycled copper processing margins will limit further rapid increases in payabilities. Performance among different grades may continue to diverge. High-grade, VAT-invoiced material that can readily enter production systems is likely to remain more resilient, while cargoes with higher impurity levels or processing costs will be more exposed to margin pressure.
Smelting Competition Is Shifting from Capacity Expansion to Feedstock Access
This change is not limited to China. Smelters elsewhere are also reassessing their primary feedstock processing scale and secondary raw-material capabilities.
Mitsubishi Materials plans to stop copper concentrate processing and related smelting operations at its Onahama Smelter by the end of March 2027, while retaining electrolytic refining of copper anodes and scrap-derived anodes. This indicates that the company is reducing its exposure to low-margin concentrate processing while preserving refining capacity capable of handling different feedstock sources.
JX Advanced Metals has also said that deteriorating concentrate procurement terms prompted it to plan a reduction of tens of thousands of mt in copper cathode output and reassess its smelting scale. At the same time, JX plans to invest approximately 7 billion yen to increase recycled-material pre-treatment capacity by around 50%, enabling it to process more complex materials such as low-grade e-scrap.
European and US companies are also expanding their secondary resource businesses. Aurubis has not reduced its primary copper operations in response to concentrate tightness, but its capital expenditure is increasingly focused on complex recycling materials. The company has commissioned its Complex Recycling Hamburg project and is continuing to ramp up its Richmond secondary smelter in the US, which is designed to process up to 180,000 mt of complex recycling materials annually.
These companies are pursuing different strategies. Onahama is reducing concentrate processing while retaining electrolytic refining; JX is reassessing primary smelting capacity while expanding recycled-feedstock pre-treatment; and Aurubis is directly increasing secondary smelting capacity.
Their common direction, however, is clear: operational priorities are shifting from simply expanding nameplate capacity to securing feedstock, optimising the raw-material mix and improving the ability to process complex recycled materials.
SMM believes the main constraint on refined copper supply is not a lack of smelting capacity, but the failure of copper concentrate, blister copper, copper anodes and suitable recycled feedstock supply to keep pace with capacity expansion. Meanwhile, tight spot cathode supply is prompting fabricators to purchase more Millberry and other high-grade scrap, increasing demand across different categories of recycled raw materials.
In the short term, concentrated smelter maintenance and feedstock shortages will continue to restrict fourth-quarter cathode output, supporting spot premiums and high-grade scrap payabilities.
A meaningful recovery in refined copper supply will depend on copper concentrate TCs, mine resumptions, blister copper and anode availability, recycled feedstock circulation and smelter restart progress. Unless supplies of both concentrate and compliant secondary feedstock improve, new smelting capacity will struggle to translate fully into additional cathode output. Competition across the copper value chain will therefore continue to shift from “how much capacity a company owns” to “whether it can secure stable and compliant feedstock.”
![How the Copper Concentrate TC/RC Benchmark Works? [SMM Analysis]](https://imgqn.smm.cn/usercenter/BdFZr20251217171712.jpg)
![[LME copper hits four-month low as AI selloff and China weakness weigh]](https://imgqn.smm.cn/usercenter/JYzFE20251217171714.jpeg)

