Solid-State Battery Weekly | Global Standards Set by China, Countdown to the 500Wh/kg Era

Published: Aug 28, 2026 14:46 (GMT+8)
① The world’s first international standard for solid-state batteries, led by China, was approved at the IEC, providing a unified “ruler” for the industry.② Easpring has cumulatively shipped 50 tonnes of all‑solid‑state cathode materials, with solid‑liquid cathode materials exceeding thousand‑tonne shipments and monthly stable output of over 100 tonnes for its dual‑phase composite cathodes.

① The world’s first international standard for solid-state batteries, led by China, was approved at the IEC, providing a unified “ruler” for the industry.
② Easpring has cumulatively shipped 50 tonnes of all‑solid‑state cathode materials, with solid‑liquid cathode materials exceeding thousand‑tonne shipments and monthly stable output of over 100 tonnes for its dual‑phase composite cathodes.
③ Geely Holding announced 500Wh/kg all‑solid‑state batteries, with pilot cross‑brand vehicle deployments planned for 2027.
④ Saike Power raised several hundred million yuan to accelerate sulfide all‑solid‑state industrialization.
⑤ GaoNeng ShuZao’s 20Ah sulfide cell passed the nail penetration test (4mm steel needle, no fire/explosion).
⑥ Professor Sun Xueliang’s team published in Nature Energy, revealing that electronic conductivity of inorganic solid electrolytes is a “hidden killer” for self‑discharge – a critical bottleneck often overlooked.

I. Standards First: World’s First International Standard for Solid‑State Batteries Takes Shape
The most significant event of the week occurred on August 21, when China‑led proposal Guide for application, test items and conditions of solid‑state batteries for electric vehicle traction was officially approved at the IEC. This is the first global international standard for solid‑state batteries, developed with participation from experts in France, Japan, South Korea, and other countries. The standard will clarify testing protocols and provide a unified benchmark for automakers worldwide. 2026 is increasingly seen as the critical inflection point where pilot lines and vehicle validation begin to converge.
II. Headline Players Accelerate: 500Wh/kg Becomes the Benchmark
Geely Holding disclosed on August 21 (via LinkedIn) that its next‑generation all‑solid‑state battery targets 500Wh/kg energy density, with diesel‑comparable range and minute‑level charging. Its battery operations have started physical validation this year, and the company plans cross‑brand pilot deployments in 2027. This aligns with the industry consensus that 2027 is the target year for all‑solid‑state battery vehicle integration. Meanwhile, Easpring (Dangsheng Technology) confirmed on August 27 that it has built a complete material system covering solid‑state cathodes, solid electrolytes, and interfacial layers. Products have been supplied to leading solid‑state battery customers including QingTao, Weilan, Huineng, Ganfeng Lithium, and Zhongqi Xinneng. Specifically, all‑solid‑state cathode materials have cumulatively shipped 50 tonnes, solid‑liquid cathode materials have reached thousand‑tonne shipments, and dual‑phase composite solid‑state cathodes are now stably shipping over 100 tonnes per month.
III. Materials Front: Tianci’s Pilot Line Ready, Jinshiyu and ZD Power Push Forward
Tianci Materials announced on August 23 that its hundred‑tonne‑scale pilot line for lithium sulfide and solid‑state electrolytes has been completed and entered trial production in Q3. Lithium sulfide is a key precursor for sulfide‑based solid electrolytes. In addition, Jinlongyu (002882) reported on August 21 that its 20Ah all‑solid‑state pouch cell has passed third‑party performance tests, achieving 400Wh/kg, and its Huidong material base is expected to commence partial production by end‑2026, while a 2GWh cell plant in Shenzhen Dapeng has started preparation. ZD Power (300686) disclosed a strategic layout in solid‑state battery materials, including plans for a 5,000‑tonne/year high‑purity lithium sulfide production base.
IV. Financing, Safety, and the Unseen Threat
Saike Power completed a several‑hundred‑million‑yuan financing round on August 26, led by Saike Investment and CICC Capital, to expand sulfide electrolyte, high‑safety cell, and all‑solid‑state pilot production lines, as well as to advance R&D in material systems, solid‑solid interfaces, cycle life, and continuous manufacturing processes. On the safety front, GaoNeng ShuZao announced on August 25 that its 20Ah sulfide all‑solid‑state cell (GSS‑20) passed a nail penetration test at a CNAS‑accredited lab, using a 4mm steel needle (stricter than the military standard’s 3mm upper limit) and observing for 1 hour with zero thermal runaway. The test is notable for combining the most challenging sulfide route, a large 20Ah capacity, and a more stringent needle size – demonstrating that engineering solutions through “equipment + process” integration can overcome key manufacturing pain points.
However, a sobering academic reminder came on August 24: Professor Sun Xueliang’s team (Ningbo Eastern University of Technology, collaborating with Xi’an Jiaotong and Zhejiang University) published in Nature Energy, systematically revealing that the electronic conductivity of current mainstream inorganic solid electrolytes is typically in the range of 10⁻⁸–10⁻⁹ S/cm – 6 to 7 orders of magnitude higher than that of commercial polymer separators (10⁻¹⁵–10⁻¹⁸ S/cm). More strikingly, when electrolyte thickness is reduced from the lab‑typical 1000μm to the practically required 20μm, the capacity loss after 1 month of storage soars from 3.9% to 94.5%. To match the self‑discharge rate of commercial Li‑ion batteries (<2.5% per month), the electronic conductivity must drop to about 10⁻¹² S/cm – a level that none of the current mainstream materials have achieved. “Energy density can go high, but self‑discharge may undermine it all” – this could be the most underestimated “grey rhino” facing solid‑state battery commercialization.
 

SMM固态电池会参会名单(部分)

 

**Note:** For further details or inquiries regarding solid-state battery development, please contact:
Phone: 021-20707860 (or WeChat: 13585549799)
Contact: Chaoxing Yang. Thank you!

 

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
[Solid-state: GaoNeng ShuZao secures nearly RMB100m Series B for solid-state battery dry-electrode equipment]
11 hours ago
[Solid-state: GaoNeng ShuZao secures nearly RMB100m Series B for solid-state battery dry-electrode equipment]
Read More
[Solid-state: GaoNeng ShuZao secures nearly RMB100m Series B for solid-state battery dry-electrode equipment]
[Solid-state: GaoNeng ShuZao secures nearly RMB100m Series B for solid-state battery dry-electrode equipment]
GaoNeng ShuZao, a dry-electrode and all-solid-state battery equipment maker, completed a Series B equity financing of nearly RMB 100 million on November 2, backed by Daqin Capital under Shaanxi Financial Investment, Changzhou Tianning Industrial Investment and Guangzhou Liwan Industrial Investment. This is the company's second funding round within a year. The proceeds will go toward technology iteration, capacity building and market expansion, strengthening its R&D and delivery capability in dry-process equipment for solid-state batteries. Founded by a team from Xi'an Jiaotong University, the company shifted from battery 3D printing to dry electrodes and all-solid-state battery manufacturing, and now operates a 200MWh dry-electrode pilot line in Guangzhou, with its Xi'an headquarters focused on frontier R&D and the Changzhou base handling whole-line commissioning and process validation.
11 hours ago
State-Owned Capital Joins Series B Round of TOPE, Accelerating Industrialisation of Solid-State Battery Equipment
Nov 05, 2026 15:47 (GMT+8)
State-Owned Capital Joins Series B Round of TOPE, Accelerating Industrialisation of Solid-State Battery Equipment
Read More
State-Owned Capital Joins Series B Round of TOPE, Accelerating Industrialisation of Solid-State Battery Equipment
State-Owned Capital Joins Series B Round of TOPE, Accelerating Industrialisation of Solid-State Battery Equipment
TOPE company completed a nearly RMB 100 million Series B round, with Daqin Capital under Shaanxi Caijin, Changzhou Tianning Industrial Investment, and Guangzhou Liwan Industrial Investment participating. It is the second round within a year, following the December 2025 Series A+. Funds will support technology iteration, capacity, and market expansion. TOPE focuses on full-line dry-process solid-state battery equipment, with R&D in Xi’an, assembly in Changzhou
Nov 05, 2026 15:47 (GMT+8)
State Capital Joins High Energy Digital Manufacturing's Series B Financing, Accelerating Industrialisation of Solid-State Battery Equipment [SMM Analysis]
Nov 05, 2026 15:29 (GMT+8)
State Capital Joins High Energy Digital Manufacturing's Series B Financing, Accelerating Industrialisation of Solid-State Battery Equipment [SMM Analysis]
Read More
State Capital Joins High Energy Digital Manufacturing's Series B Financing, Accelerating Industrialisation of Solid-State Battery Equipment [SMM Analysis]
State Capital Joins High Energy Digital Manufacturing's Series B Financing, Accelerating Industrialisation of Solid-State Battery Equipment [SMM Analysis]
[SMM Analysis: State Capital Joins High Energy Digital Manufacturing's Series B Funding, Accelerating Industrialisation of Solid-State Battery Equipment] High Energy Digital Manufacturing completed a Series B funding round of nearly 100 million yuan, with participation from Shaanxi Finance Investment Daqin Capital, Changzhou Tianning Industrial Investment, and Guangzhou Liwan Industrial Investment. This marks the second round within a year, following the Series A+ round in December 2025. The funds will be used for technology iteration, capacity, and market expansion. The company focuses on turnkey delivery of dry-process equipment for solid-state batteries, with R&D in Xi'an, final assembly in Changzhou, and pilot production in Guangzhou. Order growth in 2026 exceeded 100%, and the company has been selected as a Shaanxi provincial reserve enterprise for listing.
Nov 05, 2026 15:29 (GMT+8)