Cost-driven price strength, heatwave holidays drag demand, ADC12 gains capped [Aluminum Scrap and Secondary Aluminum Weekly Review]

Published: Jul 31, 2026 14:13

Save

[Scrap Aluminum and Secondary Aluminum Weekly Review: Cost-Driven Price Strengthening, High-Temperature Holiday Drags Demand, ADC12 Gains Constrained] This week, ADC12 market prices first stabilized and then rose. SMM ADC12 prices held steady at 24,000 yuan/mt early in the week, were raised for two consecutive days mid-week driven by costs, and stood at 24,200 yuan/mt as of Thursday, up 200 yuan/mt from last Thursday. The cost side remained the core driver of this week's price increase.

Aluminum Scrap:

This week, the aluminum scrap market continued to consolidate at highs. On July 30, SMM A00 spot aluminum prices closed at 23,630 yuan/mt, up 370 yuan/mt WoW from last Thursday. Regarding the price difference between A00 aluminum and aluminum scrap, on July 30, the price difference between A00 aluminum and mixed aluminum extrusion scrap free of paint in Foshan was approximately 2,070 yuan/mt, and the price difference between A00 aluminum and shredded aluminum tense scrap was approximately 860 yuan/mt. On the import side, this week, the price of imported zorba at Ningbo port was lowered from 21,770 yuan/mt to 21,570 yuan/mt (including tax), and at Tianjin port from 21,820 yuan/mt to 21,620 yuan/mt (including tax). Overseas aluminum scrap prices: On July 27, Malaysian baled UBC was recorded at 10,175 ringgit/mt, up 225 ringgit/mt WoW from the previous quoting day; Thailand Talon was recorded at 109,500 baht/mt, down 500 baht/mt WoW from the previous quoting day. Against the backdrop of the consumption off-season, scrap suppliers' willingness to sell at low prices was generally low, and aluminum scrap prices remained firm overall. On the demand side, as high-temperature holidays approached, operating rates at downstream cast aluminum alloy enterprises declined and orders shrank; operating rates at secondary aluminum plate/sheet and strip enterprises were moderate, but overall raw material demand support significantly weakened compared to Q2. In the short term, the tight supply of compliant invoiced cargo persisted, and suppliers' reluctance to sell at low prices provided bottom support for prices. On the import side, the lagged effects of the UAE export ban and the EU tariff hike policy will gradually emerge in the coming months, with port arrivals remaining low, June-August. On the demand side, the sluggish downstream orders are unlikely to improve in the short term. Scrap utilization enterprises will likely continue purchasing as needed and maintaining low inventory, with little significant improvement in procurement sentiment.

Secondary Aluminum Alloy:

This week, the ADC12 market showed a pattern of stabilizing first and then rising. At the start of the week, SMM ADC12 prices held steady at 24,000 yuan/mt, but were raised for two consecutive days mid-week driven by costs, closing at 24,200 yuan/mt as of Thursday, up 200 yuan/mt WoW from last Thursday. The cost side remained the core driver of this week's price rise. During the week, primary aluminum prices continued to strengthen, driving up aluminum scrap procurement costs simultaneously. Combined with tight supply of compliant aluminum scrap, enterprises' raw material costs further increased. Most producers raised their quotes accordingly to pass on cost pressure. However, the cost increase exceeded the selling price increase, and theoretical profit for ADC12 continued to narrow, with ongoing significant pressure on operations. Demand remained weak. Since July, the traditional off-season deepened, and with high-temperature holidays approaching, downstream enterprises' operating rates declined and orders shrank, keeping market activity low. The current price rise relied more on cost pass-through, with end-user purchasing mainly for essential needs. Insufficient demand limited further upside room for prices. Supply side, this week, the operating rate of secondary aluminum industry leaders fell 1.4 percentage points WoW to 49.4%, a low for the same period, mainly constrained by tax invoice issues, deepening off-season, and high-temperature holidays. Social inventory of domestic cast aluminum alloy ingots achieved a ninth consecutive weekly decline, with this week's figure at 24,300 mt, down 1,600 mt WoW. However, the rate of decline slowed down, and warehouse withdrawal momentum weakened. On the import side, overseas ADC12 offers maintained at $3,050-3,160/mt. As domestic prices rose, immediate import losses narrowed to around 600 yuan/mt, and trader inquiry enthusiasm improved somewhat. If the price spread between Chinese and overseas markets further recovers, import resources may gradually supplement the Chinese market. In the short term, the ADC12 market will continue its pattern of "cost support and demand constraint." Cost side, primary aluminum prices hold up well and aluminum scrap supply remains tight, continuing to provide strong support. Demand side, the traditional consumption off-season has not ended, and high-temperature holidays still impact downstream operating rates and procurement pace. An improvement in end-use demand is expected to await the start of the traditional peak season from mid-to-late August to September. Until then, ADC12 prices are expected to continue consolidating at highs. Going forward, focus remains on primary aluminum price trends, the recovery pace of downstream orders, and the sustained impact of tax invoice policy changes on industry supply. If end-use demand sees a seasonal recovery in late August while industry compliance costs and tight tax invoice conditions remain unresolved, the supply-demand pattern is expected to tighten further, potentially providing more solid upside support for ADC12 prices.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn

For more information on how to access our research reports, please contact:service.en@smm.cn

Related News

13 hours ago

[SMM Chromium Flash] Global Chrome Ore Departures Fall 30.66% WoW to 479,700 mt, Richards Bay and Beira Both Halt

Global chrome ore departures from major export ports totaled 479,700 mt in the week ended September 11, down 30.66% week-on-week, according to SMM's latest data. The pullback unwinds a portion of the prior week's surge, with the broad-based recovery seen across Maputo, Richards Bay, Mersin, and Beira proving short-lived. Maputo again absorbed the bulk of activity, with departures easing to 438,700 mt from 512,100 mt, a 14.33% decline that nonetheless lifted the port's share of total departures to roughly 91%, its highest level in the current data series. The port's relative resilience against a steeper market-wide contraction underscores its continued role as the primary anchor of regional chrome ore exports. Mersin departures fell more sharply, down 70.18% to 25,200 mt from 84,500 mt, while Richards Bay and Beira both reverted to zero departures after last week's rebound to 57,800 mt and 29,500 mt, respectively. The renewed halt at Richards Bay and Beira, following just one active week apiece, points to the intermittent, non-continuous nature of loadings at these secondary corridors rather than a sustained recovery in export activity. With Maputo now accounting for the near-totality of major-port volumes, the latest data reflects a reversion to the more concentrated flow pattern observed in the weeks preceding early September's broader pickup.

13 hours ago

[SMM Chromium Flash] China's Chrome Ore Port Inventory Climbs to 5.32 Mt as of Sep 11, Tianjin Up, Qinzhou Down

As of September 11, 2026, China's total chrome ore inventory at ports rose to 5.318 million mt, up 98,600 mt (+1.89%) from 5.219 million mt on September 4. Tianjin Port, China's dominant chrome ore hub, held 4.6854 million mt, up 111,700 mt (+2.44%) week-on-week, lifting its share of the national total to 88.1% from 87.6% the prior week. Qinzhou Port, the country's key southern discharge point, held 412,200 mt, down 8,100 mt (-1.93%), while the remaining smaller ports slipped a further 5,000 mt to roughly 220,000 mt. Tianjin's build alone outpaced the national total gain, meaning the rest of the port network, led by Qinzhou, gave back roughly 13,100 mt even as the overall pool of ore grew. This divergence tracks the underlying north-south split in ferrochrome production. Tianjin feeds Inner Mongolia's smelting base, which accounts for the bulk of national output and has kept operating rates elevated even as high-carbon ferrochrome prices eased about 100 yuan/mt in August on oversupply and soft retail sales. With producers there running lean, hand-to-mouth ore purchases ahead of the Mid-Autumn Festival and National Day holidays, incoming cargoes have piled up at the port rather than being drawn down quickly. Qinzhou, by contrast, serves the smaller but more responsive southern cluster across Guangxi, Sichuan and Guizhou, where producers have been drawing more actively on local stocks to feed active furnace schedules. The build at Tianjin also reflects the pipeline of South African and Zimbabwean cargoes still working through the system. South Africa alone supplied nearly 80% of China's chrome ore in H1 2026, with shipments up almost 30% YoY, while Zimbabwean supply surged 44.3% YoY over the same period. Global chrome ore departures from major export ports jumped 83.99% week-on-week to roughly 691,800 mt in the most recent week tracked, with Maputo and Richards Bay both rebounding, a signal that arrivals into China, concentrated at Tianjin, should continue at a healthy clip in the coming weeks even as southern ports draw down on stronger local consumption.

13 hours ago

[SMM Chromium Flash] India Secures 1.64 Mt Annual EU Steel Quota, Potentially Supporting Ferrochrome Demand

India has secured an annual 1.64 million mt country-specific quota for steel exports to the European Union under the India-EU free trade agreement, comprising 946,616 mt under the existing most-favoured-nation quota and an additional 694,853 mt under the FTA. The combined quota would cover about 68% of India's 2025 steel exports to the EU, up from roughly 39% under the existing quota alone, while shipments above the quota remain subject to the EU's 50% out-of-quota tariff. The agreement still requires the relevant approval and ratification processes before taking effect, expected by the end of 2026. The quota spans a wide range of steel product categories, including non-alloy and alloy hot-rolled sheets and strips, cold-rolled sheets, metallic-coated sheets, stainless steel products, and various long products such as bars, rebar and wire rod. The single largest allocation is for hot-rolled sheets and strips at 509,605 mt, a flat carbon steel category that does not use ferrochrome as an input. The available breakdown does not specify how much of India's expanded quota applies specifically to the stainless steel category, the product grade most directly relevant to chromium demand, leaving the scale of any stainless-specific benefit unclear from the disclosed figures. Separately, the expanded quota does not exempt Indian steel from the EU's Carbon Border Adjustment Mechanism, which applies to all steel imports into the bloc regardless of quota status. Global Trade Research Initiative analysis estimates CBAM-related carbon costs could average around 35% of export value once the mechanism is fully phased in, a cost that could offset a meaningful share of the benefit from the wider quota access. For the chromium market, the expanded access could provide additional support to India's stainless-steel exports and, consequently, ferrochrome consumption, to the extent Indian mills increase stainless output to utilise their portion of the quota. India is also expanding its ferrochrome capacity, meaning stronger downstream steel export opportunities could improve utilisation of domestic alloy capacity and potentially increase competition for ferrochrome markets in Europe and Asia. However, the actual impact on ferrochrome demand will depend on the pace of the FTA's implementation, how much of the quota gain is captured by stainless versus carbon steel categories, the extent to which CBAM costs erode the competitiveness of the expanded access, and Indian stainless-steel production levels overall.

13 hours ago