[SMM Stainless Steel Daily Review] SS Futures Hold Steady, Stainless Steel Spot Cargo Watched Cautiously

Published: Feb 27, 2026 14:49
Stainless Steel Daily Review: SS Futures Largely Stable, Spot Market Cautiously Watchful SMM, February 27 – SS futures traded steadily. The upward momentum in SS futures driven by news has largely subsided, with prices holding largely stable during the session. By the pre-noon close, the most-traded contract was quoted at 14,095 yuan/mt. In the spot market, SS futures remained temporarily steady. Although market participants maintained a bullish sentiment, downstream buyers were still partially on holiday, leading to weak purchasing interest. Coupled with consecutive price increases after the holiday, cautious sentiment strengthened, and prices held largely stable during the day. The most-traded SS futures contract strengthened and edged higher. At 10:30 a.m., the most-traded SS2604 contract was quoted at 14,150 yuan/mt, down 165 yuan/mt from the previous trading day. In Wuxi, spot premiums/discounts for 304/2B were in the range of 320-520 yuan/mt. In the spot market, cold-rolled 201/2B coils in Wuxi held largely stable; cold-rolled mill-edge 304/2B coils in Wuxi and Foshan held largely stable; cold-rolled 316L/2B coils in Wuxi rose 125 yuan/mt; hot-rolled 316L/NO.1 coils in Wuxi increased 200 yuan/mt; cold-rolled 430/2B coils in both Wuxi and Foshan held largely stable. This week marked the first week after the Chinese New Year holiday, with the stainless steel market gradually recovering. SS futures strengthened and edged higher, driven by rising expectations for the traditional peak consumption season of "Golden March, Silver April" and ongoing developments related to Indonesian nickel ore. Market participants exhibited strong bullish sentiment. However, the recovery pace in the spot market remained slow, as some traders and downstream end-users had not yet resumed operations. Market trading activity had not fully recovered, with only limited rigid demand orders observed during the week...

 

SMM reported on February 27 that SS futures traded largely stable. The upward momentum in SS futures driven by news factors had largely been released, with prices trading broadly stable during the day, closing at 14,095 yuan/mt before the midday break. In the spot market, SS futures temporarily stabilized. Although market participants maintained a bullish sentiment, some downstream players remained on holiday, resulting in weak purchase willingness. Additionally, as prices continued to test higher after the holiday, cautious sentiment strengthened, leading to largely stable prices during the day.

SS futures' most-traded contract strengthened and tested higher. At 10:30 a.m., SS2604 was quoted at 14,150 yuan/mt, down 165 yuan/mt from the previous trading day. In Wuxi, spot premiums/discounts for 304/2B were in the range of 320-520 yuan/mt. In the spot market, cold-rolled 201/2B coils in Wuxi held steady; cold-rolled edged 304/2B coils held stable in both Wuxi and Foshan; cold-rolled 316L/2B coils in Wuxi rose 125 yuan/mt; hot-rolled 316L/NO.1 coils in Wuxi increased 200 yuan/mt; cold-rolled 430/2B coils in both Wuxi and Foshan held steady.

This week, the first week after the Chinese New Year holiday, the stainless steel market gradually recovered. SS futures strengthened and tested higher, driven by rising expectations for the traditional peak consumption season of "Golden March and Silver April" and continued fermentation of news related to Indonesian nickel ore, which bolstered bullish sentiment among market participants. However, the recovery in the spot market was slow, as some traders and downstream end-users had not yet resumed operations, and overall market activity had not fully recovered. Only a small number of rigid demand orders were concluded during the week, presenting a distinct pattern of "strong futures, weak spot." On the inventory side, social inventories of stainless steel showed significant seasonal buildup this week, mainly due to trading suspensions during the Chinese New Year holiday, continuous arrivals of goods, and some cargoes awaiting pickup. From an industry perspective, inventory buildup around the Chinese New Year is normal, and the extent of this buildup did not exceed market expectations. Market confidence remained largely unaffected, with no panic shipments from traders, and short-term inventory pressure stayed within a controllable range. On the supply side, domestic stainless steel mills concentrated on annual maintenance in February, leading to significant production cuts and a sharp decline in output, which alleviated short-term supply pressure. However, it is crucial to note that mills are expected to resume production on a large scale in March, which will test the demand absorption capacity during the "Golden March and Silver April" peak season. The supply-demand pattern may undergo phased adjustments. Cost-side support continued to strengthen, with ongoing developments in Indonesian nickel ore news pushing nickel ore prices steadily higher, thereby increasing production costs for nickel pig iron (NPI). High-grade NPI prices rose steadily. Although trading activity in the high-grade NPI market was limited this week, and major stainless steel mills did not accept the current high prices, resulting in low purchase willingness, bullish sentiment remained strong. Expectations of tight raw material supply kept prices firm, providing solid support for stainless steel production costs, and mills maintained reasonable profitability. Overall this week the stainless steel market exhibited a core characteristic of "strong expectations weak reality" with futures strengthening good peak season expectations and a relatively strong cost side jointly boosting market confidence; however weak spot transactions significant social inventory buildup and the supply pressure from concentrated resumption of production at steel mills in March also significantly constrained the market. The current core contention in the market centers on the pace of downstream demand recovery after the holiday the progress of inventory digestion and the actual resumption of production at steel mills in March. Subsequent focus should be on closely tracking these factors to determine the direction of the market trend.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM‘s internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or to learn more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
Key Macro Factors to Watch Next Week [SMM Steel Industry Chain Weekly Report]
32 mins ago
Key Macro Factors to Watch Next Week [SMM Steel Industry Chain Weekly Report]
Read More
Key Macro Factors to Watch Next Week [SMM Steel Industry Chain Weekly Report]
Key Macro Factors to Watch Next Week [SMM Steel Industry Chain Weekly Report]
This week, ferrous metals were in the doldrums. On the first day after the holiday resumption, due to the impact of overseas risk events during the long holiday—primarily the US's plan to impose new tariffs on approximately six industries (including large batteries, cast iron and iron fittings, plastic pipes, industrial chemicals, as well as power grid and telecommunications equipment) and the escalation of US-Iran tensions—overall sentiment fluctuated significantly, and ferrous futures also touched recent lows. Mid-week, with some steel mills in the Tangshan area receiving notifications for voluntary emission reductions during the Two Sessions, coupled with Shanghai's adjustment of housing purchase restrictions and rumors of favorable real estate policies during the Two Sessions, futures rebounded from lows, showing significant sector resonance effects. However, as the weekend approached, no new favorable policies emerged, and futures retreated once again.
32 mins ago
[SMM Iron & Steel] Rio Tinto Confirms 2026 Simandou Export Guidance and Full Rail Commissioning
51 mins ago
[SMM Iron & Steel] Rio Tinto Confirms 2026 Simandou Export Guidance and Full Rail Commissioning
Read More
[SMM Iron & Steel] Rio Tinto Confirms 2026 Simandou Export Guidance and Full Rail Commissioning
[SMM Iron & Steel] Rio Tinto Confirms 2026 Simandou Export Guidance and Full Rail Commissioning
In its latest project update released on February 25, 2026, Rio Tinto confirmed that the common rail-to-port infrastructure for the Simandou project in Guinea is targeted for full commissioning by the end of Q1 2026. The company expects initial sales of 5 million to 10 million tonnes of high-grade iron ore in 2026. Mine construction reached 62% completion by the end of 2025, with first ore through permanent crushing facilities slated for the second half of 2026.
51 mins ago
[SMM Iron & Steel] Fortescue Reports 23% Profit Surge on Record Iron Ore Shipments
51 mins ago
[SMM Iron & Steel] Fortescue Reports 23% Profit Surge on Record Iron Ore Shipments
Read More
[SMM Iron & Steel] Fortescue Reports 23% Profit Surge on Record Iron Ore Shipments
[SMM Iron & Steel] Fortescue Reports 23% Profit Surge on Record Iron Ore Shipments
Fortescue Metals Group reported a 23% increase in first-half profit on February 25, 2026, driven by record iron ore shipments and higher realized prices. The company noted a 3.0% drop in iron ore production costs and a 6.6% increase in realized prices. Fortescue's performance highlights the resilience of major Australian miners despite fluctuating global demand signals.
51 mins ago
Register to Continue Reading
Gain access to the latest insights in metals and new energy
Already have an account?sign in here