SMM Analysis: Jan Aluminum Billet Output Slumps, Feb Production to Hit 4-Year Low

Published: Feb 13, 2026 23:42
[SMM Analysis: Primary Aluminum Billets Operation in January Weaker Than Expectations, February Production May Hit a Nearly Four-Year Low] Domestic primary aluminum billets operation in January performed weaker than expectations. According to SMM data...

SMM February 13:

In January, the operating performance of domestic primary aluminum billets weakened more than expected. According to SMM data, the operating rate for aluminum billets dropped significantly by 5.3 percentage points MoM to 50.3%, down 1.3 percentage points YoY. Aluminum billet production in January was only 1.357 million mt, a sharp decrease of 144,000 mt MoM, down 3.9%; it increased slightly by 12,000 mt YoY, up 0.9%. After the New Year's Day holiday, domestic aluminum prices surged continuously and hit a record high by the end of January, which to some extent diverged from the weak fundamentals. Against this backdrop, downstream companies showed no intention to chase higher prices for stockpiling before the Chinese New Year, with rigid demand relying solely on volume discounts, and restocking sentiment fell to a freezing point. Profile enterprises generally started holidays earlier, and aluminum billet enterprises bore the brunt of order reductions, leading to a "flash crash" in aluminum billet processing fees. The industry situation deteriorated rapidly, with processing fees in three regions trapped deep in negative territory and struggling to recover, while in-factory inventory at aluminum billet enterprises also climbed step by step. Under pressure from inventory and capital, aluminum billet supply in January shrank more than expected. Compared with the previous month, more enterprises underwent maintenance or proactively cut production by reducing liquid aluminum procurement, with production in Guangxi, Xinjiang, Inner Mongolia, Qinghai, Guizhou, and Henan provinces dropping more than 10% MoM.

Looking ahead to February, as the Chinese New Year holiday approaches, most enterprises that underwent maintenance or proactively cut production in January have not yet resumed operations. With more downstream enterprises entering the holiday period, lack of orders, high fluctuations in aluminum prices, and processing fees remaining below cost lines have further dampened billet plants' willingness to produce. In early February, the scale of production cuts and halts at aluminum billet enterprises is expected to continue expanding. In previous years, most primary aluminum billet enterprises maintained normal production during the Chinese New Year holiday, but this year several billet plants have chosen to suspend operations during the holiday. Taking into account the casting ingot plans of upstream aluminum enterprises, expectations for the domestic proportion of liquid aluminum, and the performance of social and in-factory aluminum billet inventories, SMM expects domestic aluminum billet production in February to fall below 1.13 million mt, with the operating rate projected to pull back to around 42.1%, hitting a nearly four-year low. (The February production data is only a forecast. Data source statement: Except for publicly available information, other data are processed by SMM based on public information, market communication, and SMM's internal database model, and are for reference only, not constituting decision-making advice.)

 

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM‘s internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or to learn more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
Aluminum Alloy 2608 Contract Rebounds, Closes Higher at 23,150 Yuan/mt
46 mins ago
Aluminum Alloy 2608 Contract Rebounds, Closes Higher at 23,150 Yuan/mt
Read More
Aluminum Alloy 2608 Contract Rebounds, Closes Higher at 23,150 Yuan/mt
Aluminum Alloy 2608 Contract Rebounds, Closes Higher at 23,150 Yuan/mt
[SMM Aluminum Alloy Daily Review] Today, the cast aluminum alloy 2608 contract moved downwards after a higher opening, then rebounded strongly, closing at 23,150 yuan/mt, up 155 yuan from yesterday's settlement price, an increase of 0.67%. Open interest increased by 531 lots to 15,326 lots, with the rise in open interest and price suggesting a bullish signal. In the short term, watch whether the resistance at the 23,200 yuan/mt level can be effectively broken.
46 mins ago
[SMM Aluminum Flash News] Scandium Canada Partnered With University of Waterloo to Develop Aluminum-Scandium alloy
1 hour ago
[SMM Aluminum Flash News] Scandium Canada Partnered With University of Waterloo to Develop Aluminum-Scandium alloy
Read More
[SMM Aluminum Flash News] Scandium Canada Partnered With University of Waterloo to Develop Aluminum-Scandium alloy
[SMM Aluminum Flash News] Scandium Canada Partnered With University of Waterloo to Develop Aluminum-Scandium alloy
Scandium Canada has partnered with the University of Waterloo to develop aluminum-scandium alloys for additive manufacturing applications. The collaboration between Scandium+ and Waterloo’s Multi-Scale Additive Manufacturing Laboratory (MSAM) will initially focus on establishing manufacturing parameters for Laser Powder Bed Fusion (L-PBF) metal 3D printing. The project aims to expand the commercial adoption of aluminum-scandium alloys while reducing production costs. Known for their high strength, lightweight properties and resistance to cracking, aluminum-scandium alloys are considered attractive for aerospace and defense applications. The initiative will also support the development of a North American scandium supply chain and generate technical data needed for wider industrial adoption.
1 hour ago
[SMM Aluminum Flash News] Toyota Establishes Closed-Loop Aluminum Recycling System for Hybrid Vehicle Production in UK
1 hour ago
[SMM Aluminum Flash News] Toyota Establishes Closed-Loop Aluminum Recycling System for Hybrid Vehicle Production in UK
Read More
[SMM Aluminum Flash News] Toyota Establishes Closed-Loop Aluminum Recycling System for Hybrid Vehicle Production in UK
[SMM Aluminum Flash News] Toyota Establishes Closed-Loop Aluminum Recycling System for Hybrid Vehicle Production in UK
Toyota Motor Manufacturing UK has established a closed-loop aluminum recycling system at its Burnaston plant in Derbyshire, creating what it describes as a European-first process for recovering aluminum from end-of-life vehicles and reusing it in new hybrid vehicle production. Recycled aluminum from discarded alloy wheels is sent to Toyota’s Deeside engine plant in Wales, where it is processed into hybrid powertrain components before returning to Burnaston for installation in new Corolla vehicles. Toyota produced its first vehicle containing recycled aluminum from this system on March 19, 2026. The Burnaston facility serves as a pilot site, with a second Circular Factory planned for Wałbrzych, Poland, later this year.
1 hour ago
Register to Continue Reading
Gain access to the latest insights in metals and new energy
Already have an account?sign in here