[SMM Module Recycling Comment] Australia Invests 24.7 Million Australian Dollars to Launch National PV Recycling Pilot, Tackling the Challenge of Retired Modules as a "Besieged City"

Published: Jan 20, 2026 17:20
The Australian government has announced an investment of 24.7 million Australian dollars to launch a PV recycling pilot program, which is expected to establish up to 100 recycling sites nationwide within three years. This initiative aims to address the impending wave of PV module retirements and unlock the value of the circular economy.

On January 20, the Australian government officially launched a three-year nationwide PV module recycling pilot program, with a total investment of 24.7 million Australian dollars. The program will establish up to 100 demonstration recycling sites across the country, initially focusing on rooftop PV modules and gradually expanding to household cells in the future. This initiative aims to increase the current PV module recycling rate of only 17%, reduce landfill waste, and promote the development of a circular economy system for the PV industry.

As one of the countries with the highest rooftop PV penetration rate globally, Australia is facing increasing pressure from PV retirement. By the end of 2025, the cumulative installed capacity of rooftop PV in the country reached 26.8 GW, covering approximately 4.2 million households and small enterprises. However, as early-installed PV modules gradually enter their retirement period, the annual volume of waste is expected to surge from 59,000 mt in 2025 to 91,000 mt by 2030. Currently, only a small number of retired modules are recycled, with the majority being stockpiled, landfilled, or exported, resulting in a low level of resource utilization.

Australia's pilot program is forward-looking and exemplary. On one hand, the country's PV module waste volume is growing rapidly, with the residential sector set to become the primary source of retirement. Without establishing large-scale recycling channels, a significant number of modules will end up in landfills, causing resource waste and environmental risks. On the other hand, retired modules still contain considerable economic value: approximately one-third of the modules have the potential for direct reuse, contributing about 24 GW of energy capacity; efficient recycling of the critical minerals they contain, such as copper, silver, and aluminum, could release economic value of up to 7.3 billion Australian dollars and achieve a carbon emission reduction of 1.2 mt per mt of modules recycled.

The pilot program is expected to provide crucial momentum for the industry. Previously, Australia's PV recycling sector faced challenges such as a small number of enterprises, limited scale, and operational difficulties. Major e-waste recycler Sir Cel and well-known PV recycling company Reclaim PV went bankrupt successively, leaving only seven specialized recycling enterprises nationwide. Through the pilot, the government will assist enterprises in testing transportation solutions, calculating regional costs, and optimizing recycling models, thereby accumulating data and experience for establishing a permanent national recycling system.

From a policy coordination perspective, the pilot closely aligns with the Productivity Commission's recommendations on improving the product stewardship system for PV modules, reflecting an approach of "national coordination, local collaboration, and technological advancement." Environment Minister Watt Murray emphasized that module materials "should not be treated as waste," Energy Minister Bowen Chris highlighted that modules will achieve "self-renewability," and Finance Minister Chalmers Jim focused on the cost reduction and resource security benefits brought by recycling, demonstrating the government's multi-departmental commitment to promoting a circular economy.

Looking ahead, the appointment of administrators and the launch of services for the pilot program have been scheduled. If implemented smoothly, this system is expected to not only alleviate the pressure of end-of-life modules in Australia but also provide a "Australian model" for global PV recycling, particularly serving as a reference in scenarios with dense rooftop PV installations and decentralized recycling networks. However, ensuring controllable recycling costs, sustainable operation of enterprises, and increased public participation remain key issues that require continuous observation during the pilot phase.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM‘s internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or to learn more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
[SMM PV News] United Solar Starts Polysilicon Production in Oman
13 hours ago
[SMM PV News] United Solar Starts Polysilicon Production in Oman
Read More
[SMM PV News] United Solar Starts Polysilicon Production in Oman
[SMM PV News] United Solar Starts Polysilicon Production in Oman
Omani manufacturer United Solar Holding has commenced production at its polysilicon facility in the Sohar Freezone, targeting an annual capacity of 100,000 metric tons, which enough to support 40 GW of solar modules. The milestone follows the closure of a massive debt financing package in mid-January totaling over $900 million, split between a $480 million facility led by the International Finance Corporation (IFC) and over $400 million from local commercial banks. The project's largest shareholder, Future Fund Oman, has increased its stake to approximately $260 million.
13 hours ago
[SMM PV News] Italy Adds 6.4 GW Solar in 2025 as Utility-Scale Boom
19 hours ago
[SMM PV News] Italy Adds 6.4 GW Solar in 2025 as Utility-Scale Boom
Read More
[SMM PV News] Italy Adds 6.4 GW Solar in 2025 as Utility-Scale Boom
[SMM PV News] Italy Adds 6.4 GW Solar in 2025 as Utility-Scale Boom
Italy deployed 6,437 MW of new photovoltaic capacity in 2025, a 5% decrease from the 6.8 GW added in 2024, bringing the country's cumulative total to 43.5 GW. The overall decline was driven by a sharp 24% contraction in the residential sector and a slowdown in commercial installations. However, the utility-scale segment surged by 15%, connecting 3.4 GW of new capacity largely due to a wave of previously issued authorizations. This growth was heavily backloaded, with the final quarter alone accounting for 2.4 GW of the year's total, fueled significantly by projects larger than 10 MW.
19 hours ago
[SMM PV News] India SECI Auctions 1.2 GW Renewable-Storage Projects
19 hours ago
[SMM PV News] India SECI Auctions 1.2 GW Renewable-Storage Projects
Read More
[SMM PV News] India SECI Auctions 1.2 GW Renewable-Storage Projects
[SMM PV News] India SECI Auctions 1.2 GW Renewable-Storage Projects
The Solar Energy Corporation of India (SECI) has concluded its auction for 1.2 GW of renewable energy capacity paired with energy storage, designed to supply 4.8 GWh of peak power daily. Adyant Enersol secured the lowest tariff of INR 6.27/kWh for 100 MW. Serentica Renewables (600 MW) and AMPIN Energy (199 MW) followed closely with bids of INR 6.28/kWh, while ACME Solar was awarded the remaining capacity (approximately 301 MW). These projects will be developed on a build-own-operate basis under 25-year Power Purchase Agreements (PPAs), requiring developers to co-locate generation and storage systems and connect them to the interstate transmission network.
19 hours ago
[SMM Module Recycling Comment] Australia Invests 24.7 Million Australian Dollars to Launch National PV Recycling Pilot, Tackling the Challenge of Retired Modules as a "Besieged City" - Shanghai Metals Market (SMM)