Limited Commissioning of New Projects Leads to Slow Growth in Aluminum Production in 2025

Published: Nov 24, 2025 10:31 (GMT+8)

Source: SMM

Save

SMM News, November 24:

Approaching year-end, looking back at the whole year of 2025, China's operating aluminum capacity has further approached the ceiling of compliant capacity. However, few new projects were commissioned during the year, resulting in limited capacity growth. Boosted by earlier production cuts due to losses and the gradual resumption of production from technological transformation projects, China's aluminum production in 2025 is still expected to achieve a YoY growth rate of 1.7%.

China by Province:

Sichuan's operating capacity increased by 255,000 mt compared to the end of 2024, mainly because some aluminum enterprises incurred losses and implemented production cuts and maintenance due to high alumina costs at the end of 2024. These enterprises gradually resumed production from February to April 2025, with a total resumed capacity of 255,000 mt. Additionally, individual enterprises in Guangxi underwent technological transformation due to losses at the end of 2024 and started restarting cells from August to September 2025, contributing a total resumed capacity of 100,000 mt.

During 2025, some aluminum capacity was relocated from Shandong to Yunnan, reducing Shandong's operating aluminum capacity by 740,000 mt compared to the end of 2024, with all related capacity transferred to Yunnan. Additionally, an aluminum smelter in Yunnan resumed production of 30,000 mt of previously idle capacity, bringing Yunnan's total operating capacity to an increase of 770,000 mt compared to the end of 2024.

In addition, the following changes in operating aluminum capacity occurred in 2025 in China:

The commissioning of a relocation and upgrade project at an aluminum smelter in Qinghai added 100,000 mt of operating capacity;
The completion of a previous technological transformation at an aluminum smelter in Guizhou led to the resumption of production, increasing capacity by 53,000 mt.

Overall, China's operating aluminum capacity in 2025 increased by 538,000 mt compared to the end of 2024. With the further manifestation of production growth from some newly commissioned capacities in 2024, China's aluminum production in 2025 is expected to increase by approximately 700,000–800,000 mt. Looking ahead, from the end of 2025 into 2026, a new project at an aluminum smelter in Xinjiang is expected to be commissioned, with a projected net increase in existing capacity of 200,000 mt; a new project at an aluminum smelter in Inner Mongolia is expected to be commissioned, with a projected net increase in existing capacity of 350,000 mt; an aluminum smelter in Henan is expected to relocate some capacity to Inner Mongolia, and after commissioning, this is projected to result in a net increase in operating capacity due to the utilization of some idle capacity indicators; a relocation and upgrade project at an aluminum smelter in Shanxi is expected to contribute a net increase in operating capacity.

Regions Outside China, operating capacity as of now has increased by approximately 500,000 mt compared to the end of 2024. Details are as follows:

Capacity increases:

Production resumptions at three aluminum smelters owned by a German enterprise are progressing steadily, expected to contribute 150,000 mt of operating capacity growth for the full year;
An aluminum smelter in Spain resumed production. Although the process was temporarily halted due to a power outage, it subsequently resumed and is expected to reach full capacity in 2026;
In Indonesia, an aluminum plant launched the second phase of its project in 2024 but suspended operations due to cost issues. The capacity reached full production in 2025. Two new aluminum smelter projects are scheduled to commence their first phases by the end of 2025, with full capacity expected in 2026. Total capacity growth involved in Indonesia amounts to approximately 650,000 mt;
An aluminum plant in Malaysia implemented production cuts in 2024 due to an accident. The related capacity resumed operations in Q1 2025, contributing 100,000 mt of operating capacity growth;
A new aluminum smelter project in Angola is expected to be energized by the end of 2025, adding 120,000 mt of existing capacity;
An aluminum plant in New Zealand resumed production. It had cut production in 2024 in response to energy shortages and resumed in 2025. However, due to persistent power supply risks in 2025, the resumption was suspended. Current operating capacity has increased by 80,000 mt;
An aluminum plant in Brazil continues to push for production resumption, contributing around 70,000 mt of operating capacity growth within the year.

Capacity reductions:

In October 2025, an aluminum plant in Iceland temporarily halted one production line due to electrical equipment failure, involving an annual capacity of 210,000 mt.

aluminum

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn

For more information on how to access our research reports, please contact:service.en@smm.cn

Related News

4 hours ago

Alba Advances in Acquisition of Aluminium Dunkerque, Aims for Global Low-Carbon Aluminum Expansion

[SMM Aluminum Express News] Aluminium Bahrain (Alba) said its proposed acquisition of Aluminium Dunkerque is progressing, with the company working to secure the remaining regulatory approvals required to close the transaction. At its Q3 Board meeting on September 22, Chairman Khalid Al Rumaihi described the deal as an important step in Alba’s international expansion and its ambition to build a global low-carbon aluminum platform. Alba signed the agreement to acquire Aluminium Dunkerque in May 2026, with the transaction subsequently valued at around US$2.2 billion. Aluminium Dunkerque is the EU’s largest primary aluminum smelter, while Alba operates the world’s largest single-site aluminum smelter in Bahrain. The acquisition remains subject to outstanding regulatory approvals and has not yet closed. The Board also approved Alba’s preliminary 2027 Marketing Plan, while reviewing operational, commercial and governance matters. For aluminum supply, the main takeaway is that Alba remains committed to completing the Dunkerque acquisition despite the regional supply disruptions that affected its Bahrain operations earlier this year.

4 hours ago

Guinea Seeks US Financing for CBG's Alumina Refinery Project

[SMM Aluminum Express News] Guinea is seeking US financing for Compagnie des Bauxites de Guinée’s (CBG) planned alumina refinery, as the country accelerates efforts to process more of its bauxite domestically. Guinea’s Mines Ministry said discussions were held on September 18 with the US International Development Finance Corporation (DFC) and US Export-Import Bank over potential involvement in financing the project. CBG aims to begin construction by the end of 2026, although the refinery’s financing requirement and potential US contribution have not yet been disclosed.

4 hours ago

European Parliament Backs Expanded CBAM for Downstream Aluminum and Steel Products from 2028

[SMM Aluminum Express News] The European Parliament has backed a broader expansion of the EU Carbon Border Adjustment Mechanism (CBAM) to downstream aluminum and steel products from 2028. Parliament adopted its negotiating position on September 15 by 464 votes to 50, with 159 abstentions, supporting coverage beyond the European Commission’s original proposal for 180 additional downstream products, including aluminum-intensive products such as wire, fasteners, springs and certain finished goods. For aluminum, Parliament also proposes lowering the CBAM exemption threshold from 50 tonnes to just 5 tonnes, meaning smaller-volume importers could become subject to CBAM requirements. It also supports stronger anti-circumvention rules, including the use of emissions default values based on the actual country of origin where authorities suspect attempts to avoid CBAM obligations. The changes are not final yet, with negotiations with the EU Council still required. If adopted, the expansion would increase carbon-reporting and potentially carbon-cost exposure for exporters of downstream aluminum products into the EU, extending CBAM further beyond primary and semi-finished aluminum.

4 hours ago