The Difficult Balance Between Policy Uncertainty and Price Volatility

Published: Nov 23, 2025 23:26 (GMT+8)
Source: SMM
In October 2025, the secondary copper rod market struggled under multiple pressures including policy uncertainty, volatile copper prices, and weak end-use demand, generally characterized by an operating rate fluctuating at lows, diverging profit margins, and regional structural adjustments.

In October 2025, the secondary copper rod market struggled under multiple pressures including policy uncertainty, volatile copper prices, and weak end-use demand, generally characterized by an operating rate fluctuating at lows, diverging profit margins, and regional structural adjustments. The average monthly operating rate for the secondary copper rod industry saw a slight rebound to 26.46% compared to September, but still decreased 2.61 percentage points YoY, reflecting insufficient market recovery momentum. At the beginning of the month, affected by the Mid-Autumn and National Day holidays combined with a sharp surge in copper prices, the weekly operating rate of enterprises once hit a bottom of 11.93%, with some companies opting for production halts and maintenance to mitigate risks. As the holidays ended and copper prices staged a pullback, the operating rate gradually recovered to 22.8% in the middle and late parts of the month, yet the monthly average remained below the level typical for the traditional peak season. The price difference between copper cathode rod and secondary copper rod showed significant fluctuations, with the monthly average widening to over 1,700 yuan/mt, peaking at 1,848 yuan/mt, which provided economic advantages for secondary copper rod. However, limited new orders from end-use wire and cable enterprises prevented the price spread advantage from effectively translating into actual consumption.

Policy uncertainty became the core factor constraining market vitality. Local incentive policies related to Notice No. 770 remained unclear in major production areas such as Jiangxi and Anhui, leading many secondary copper rod enterprises to maintain a wait-and-see stance. In Jiangxi, a concentrated capacity region, corporate production strategies turned conservative: on one hand, shifting to anode plate production to maintain basic operations, and on the other, strictly purchasing imported recycled copper raw materials with invoices to avoid tax risks. This resulted in an actual contraction in secondary copper rod supply, with orders shifting to regions like Hubei where policies were relatively stable, prompting local enterprises to temporarily increase furnace operations. The import market also faced pressure, as customs in areas like Guangdong and Ningbo strengthened inspections of recycled copper raw materials, extending clearance cycles by 15-30 days, which exacerbated difficulties in procuring tax-included raw materials.

Supply-demand imbalance persisted throughout the month. On the supply side, suppliers of recycled copper raw materials held back sales when copper prices surged, leading to tight circulating supply. On the demand side, weakness continued, with no improvement in orders from end-use sectors such as construction and home appliances. Downstream enterprises showed low acceptance of high-priced copper rods, mostly purchasing as needed. Although the gross sales profit margin for secondary copper rod reached a weekly high of 1,602 yuan/mt, the issue of accumulating finished product inventories became prominent, with sample enterprise inventories rising to 3,560 mt by month-end, up 980 mt MoM, reflecting the dilemma of "price without market." Market divergence intensified: copper cathode rod enterprises saw their operating rates decline due to order diversion, while secondary copper rod, despite having cost advantages, was constrained by policies and demand, making it difficult to achieve volume expansion. Looking ahead to November, the market is expected to seek a new balance amid policy clarity and price adjustments. As copper prices retreat from highs (with the anticipated trading range shifting lower), end-users may find a restocking window, stimulating a slight rebound in the operating rate of secondary copper rod. If the details of Notice No. 770 are implemented, enterprises in Jiangxi, Anhui, and other regions may gradually resume production, driving raw material procurement demand. However, the historical off-season effect cannot be overlooked: falling temperatures in northern regions will curb outdoor construction, making it difficult for cable consumption to improve significantly, and limiting room for the price difference between primary metal and scrap to widen. The operating rate of secondary copper rod is projected to show a "low first, high later" trend in November, but regional supply-demand mismatches will persist. Enterprises should closely monitor copper price trends and policy developments, striving to balance just-in-time procurement with inventory control to navigate structural opportunities and risks in a volatile market.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
SHFE: Approves Jinchuan Group Co., Ltd. to increase the registered production site for “JNMC” brand Grade A copper (permanent cathode-K)
2 hours ago
SHFE: Approves Jinchuan Group Co., Ltd. to increase the registered production site for “JNMC” brand Grade A copper (permanent cathode-K)
Read More
SHFE: Approves Jinchuan Group Co., Ltd. to increase the registered production site for “JNMC” brand Grade A copper (permanent cathode-K)
SHFE: Approves Jinchuan Group Co., Ltd. to increase the registered production site for “JNMC” brand Grade A copper (permanent cathode-K)
2 hours ago
[SMM Announcement] Chinese Market Metal Prices and News Updates Suspended during National Day Holiday (Oct 1-7)
2 hours ago
[SMM Announcement] Chinese Market Metal Prices and News Updates Suspended during National Day Holiday (Oct 1-7)
Read More
[SMM Announcement] Chinese Market Metal Prices and News Updates Suspended during National Day Holiday (Oct 1-7)
[SMM Announcement] Chinese Market Metal Prices and News Updates Suspended during National Day Holiday (Oct 1-7)
2 hours ago
Koryx Copper Completes Haib PFS Drilling, Targets Updated Resource and PFS by Year-End
3 hours ago
Koryx Copper Completes Haib PFS Drilling, Targets Updated Resource and PFS by Year-End
Read More
Koryx Copper Completes Haib PFS Drilling, Targets Updated Resource and PFS by Year-End
Koryx Copper Completes Haib PFS Drilling, Targets Updated Resource and PFS by Year-End
Koryx Copper has completed its infill and expansion drilling programme at the wholly owned Haib Copper Project in southern Namibia, advancing the project toward an updated Mineral Resource Estimate (MRE) and Pre-Feasibility Study (PFS) targeted for publication before the end of 2026.​ The company reported assay results from a further 18 drill holes totalling 7,074 metres. Among the latest results, hole HM199 returned 438 metres grading 0.40% copper equivalent (CuEq), including 224 metres at 0.51% CuEq. Hole HM193 returned 681 metres at 0.34% CuEq, including 22 metres at 0.71% CuEq and 169 metres at 0.40% CuEq.​ Koryx said the results continued to demonstrate wide mineralised intercepts across the Haib deposit, together with higher-grade zones closer to surface in some areas. The company said the results broadly correlate with its existing geological model, while the completed drilling programme will feed into geological modelling and estimation work for the updated resource estimate and PFS.​ Haib is a large disseminated porphyry copper-molybdenum-gold deposit. Koryx currently envisages developing the project as a large-scale open-pit operation using conventional sulphide milling and flotation to produce copper and molybdenum concentrates.​ The latest drilling follows Koryx's March 2026 Mineral Resource Estimate, which reported 744 million mt of Indicated material grading 0.28% copper, containing approximately 2.09 million mt of copper, and 579 million mt of Inferred material grading 0.24% copper, containing approximately 1.39 million mt of copper, using a 0.15% copper cut-off. Koryx said the updated MRE and PFS remain on track for publication before the end of 2026.​ Completion of the PFS drilling programme marks another step in Koryx Copper's advancement of Haib toward a potential large-scale copper development. The latest drilling continues to show broad mineralised intervals, while the upcoming updated resource estimate will provide greater clarity on whether recent infill and expansion drilling has materially changed the project's resource base. Attention will now turn to the updated MRE and PFS expected before year-end, which should provide further detail on the proposed mine configuration, processing strategy, production profile and project economics.
3 hours ago