【SMM Steel】Australia Perpanjang Investigasi Anti-Dumping atas Impor Besi Beton dari 5 Negara

Telah Terbit: Sep 22, 2025 16:39
【SMM Steel】Komisi Anti-Dumping (ADC) Australia memperpanjang batas waktu penerbitan hasil akhir investigasi anti-dumping (AD) terhadap impor baja tulangan ulir hot-rolled dari Malaysia, Thailand, Indonesia, Vietnam, dan Turki. Investigasi yang dimulai pada September 2024 ini tertunda akibat masalah verifikasi data terkait. Akibatnya, penerbitan Pernyataan Fakta Penting (SEF) serta laporan dan rekomendasi akhir kepada Menteri Industri, Inovasi dan Sains ditunda. Keputusan akhir kini akan diterbitkan pada 18 Desember 2025, lebih lambat dari jadwal semula 19 November 2025. Periode investigasi berlangsung dari 1 Juli 2023 hingga 30 Juni 2024. Produk terkait adalah baja tulangan ulir hot-rolled (rebar atau debar) dengan berbagai diameter hingga 50 mm, di bawah kode HS 7214.20.00 (47), 7228.30.10 (70), 7228.30.90 (40), dan 7228.60.10 (72).

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
[SMM Steel] Shipping Bottlenecks and Geopolitical Risks Tighten Iranian Semi-Finished Steel Export Trade
1 menit yang lalu
[SMM Steel] Shipping Bottlenecks and Geopolitical Risks Tighten Iranian Semi-Finished Steel Export Trade
Baca Selengkapnya
[SMM Steel] Shipping Bottlenecks and Geopolitical Risks Tighten Iranian Semi-Finished Steel Export Trade
[SMM Steel] Shipping Bottlenecks and Geopolitical Risks Tighten Iranian Semi-Finished Steel Export Trade
[Iran] The Iranian semi-finished steel market has recently shown a distinct divergence between domestic and export sectors. In the billet segment, export trading remained subdued due to shipping constraints, heightened maritime risks, and cooling regional demand, with export offers softening to 410–415 USD/tonne FOB and concluded transactions limited mostly to 10,000–15,000-tonne barge consignments or small regional lots; by contrast, the domestic market performed strongly, buoyed by the sharp depreciation of the local currency and summer power shortages. In the slab segment, export quotes edged down slightly to 420 USD/tonne FOB; however, severe geopolitical risks, strict compliance scrutiny by shipowners, and the necessity to reroute shipments via Oman or the UAE significantly inflated logistical costs and fulfillment uncertainty, sending overseas buying interest to freezing point and leaving the market devoid of major deals.
1 menit yang lalu
[SMM Steel] European HRC Market Mixed as Mill Price Hikes Encounter Buyer Resistance
2 menit yang lalu
[SMM Steel] European HRC Market Mixed as Mill Price Hikes Encounter Buyer Resistance
Baca Selengkapnya
[SMM Steel] European HRC Market Mixed as Mill Price Hikes Encounter Buyer Resistance
[SMM Steel] European HRC Market Mixed as Mill Price Hikes Encounter Buyer Resistance
[Europe] As the European summer holiday season draws to a close, hot-rolled coil (HRC) spot prices across Northwest Europe and Italy saw narrow rangebound gains. Ex-works prices in Northwest Europe settled at 733 EUR/tonne EXW (approx. 851 USD/tonne), while Italian ex-works quotes stood at 727 EUR/tonne EXW (approx. 844 USD/tonne). On the supply side, some Northwest European mills actively offered November shipments to Southern Europe, raising quotes to 790 EUR/tonne DDP (approx. 917.50 USD/tonne), while certain Italian suppliers elevated quotes to 750–760 EUR/tonne DDP (approx. 870–883 USD/tonne). However, with downstream end-user demand recovering sluggishly and buyers unable to pass on higher costs, these elevated price levels were largely rejected by the market. In the import sector, Turkish mills held export offers to Europe steady at 565–580 EUR/tonne CFR (approx. 656–673 USD/tonne, excluding duties), though buyer interest remained minimal due to compounded tariff, quota, and compliance risks.
2 menit yang lalu
Ringkasan Inventaris Bahan Bangunan Nasional per 3 September
30 menit yang lalu
Ringkasan Inventaris Bahan Bangunan Nasional per 3 September
Baca Selengkapnya
Ringkasan Inventaris Bahan Bangunan Nasional per 3 September
Ringkasan Inventaris Bahan Bangunan Nasional per 3 September
Pada 3 September, total inventaris rebar minggu ini adalah 6,4776 juta ton, turun 94.900 ton WoW, turun 1,44% WoW, dan naik 17,55% YoY berdasarkan kalender lunar. Total inventaris wire rod minggu ini adalah 1,4483 juta ton, turun 40.200 ton WoW, turun 2,70% WoW, dan naik 12,85% YoY berdasarkan kalender lunar.
30 menit yang lalu
【SMM Steel】Komisi Anti-Dumping (ADC) Australia memperpanjang batas wak - Shanghai Metals Market (SMM)