[SMM Analysis] Samsung Battery Defects Lead to Recall of Over 180,000 Cars, Involving Multiple Car Models from Ford, Audi, and Stellantis

Published: Feb 8, 2025 20:43
[SMM Analysis] On February 8, Samsung announced a large-scale recall plan involving 180,196 units of vehicles under Ford, Audi, and Stellantis. The reason for this recall is the risk of malfunction in the high-voltage battery packs equipped in these vehicles, which may cause fires.

On February 8, 2025, Samsung SDI issued an urgent announcement stating that its supplied high-voltage battery packs posed significant safety risks, affecting 180,196 NEVs from four major automakers, including Ford, Audi, and Stellantis. This recall incident spanned three continents—North America, Europe, and Asia—bringing power battery safety issues back into the spotlight of the industry.

Among the affected automakers, Stellantis Group was hit the hardest, with 155,096 units of its Jeep Wrangler 4xe (2020-2024 models) and Grand Cherokee 4xe (2022-2024 models) plug-in hybrid car models confirmed to have severe safety risks. These models are the group’s key products in its electrification transition, with a market share as high as 27% in the North American market last year. Additionally, Ford's 2020-2024 Escape, 2021-2024 Lincoln Corsair, and Audi's 2022 A7 and 2022-2023 Q5 strategic car models were also included in the recall list. Notably, some Volkswagen Group car models were confirmed to have thermal runaway risks due to the use of the same battery modules, indicating that Samsung's battery defects might have broader industry implications.

According to the investigation report by the US National Highway Traffic Safety Administration (NHTSA), the battery cells provided by Samsung had separators with a thickness of only 10 microns, which exhibited micron-level damage. This defect could gradually expand during long-term charge and discharge cycles, eventually causing direct contact between the anode and cathode, leading to thermal runaway. Disassembly and analysis of the faulty batteries revealed that Samsung's manufacturing process had a technical defect in handling cathode pole piece burrs. These metal protrusions could puncture the separators during vehicle vibrations. Furthermore, the battery management system's delayed response in its warning mechanism exacerbated the safety risks.

The impact of this recall incident goes far beyond the surface numbers. With an estimated recall cost of $2,000 per vehicle, Stellantis Group alone is expected to face a direct loss of $310 million, not including the loss of brand value and market share. The more profound impact lies in the erosion of consumer trust in plug-in hybrid electric vehicle (PHEV) technology. According to third-party survey data, the concern index of potential car buyers regarding PHEV models increased by 42%.

From an industry perspective, this incident exposed three key issues: first, systemic flaws in process control among battery suppliers; second, insufficient quality supervision of core components by automakers; and third, outdated battery safety standards lagging behind technological advancements. The 20th-century quality systems currently adopted by the industry are no longer adequate to meet the demands of 21st-century battery technology development.

Crises often breed opportunities. Domestic companies have also made relatively innovative advancements in battery safety. For instance, BYD's blade battery uses "honeycomb arrangement + ceramic coating" technology to extend puncture ignition time to three times the industry average. CATL has developed intelligent self-healing separator materials. These innovations demonstrate that structural design and material breakthroughs can achieve qualitative improvements in battery safety.

On the policy front, changes are accelerating. According to SMM, the Ministry of Industry and Information Technology (MIIT) of China is expected to introduce the "Power Battery Life Cycle Safety Management Specification," which, for the first time, incorporates "visualized monitoring of the manufacturing process" and a "defect traceability big data platform" into mandatory standards. The European Union is even more aggressive, requiring all power batteries to be equipped with a three-level thermal barrier system starting in 2026. These policy initiatives are likely to have a more direct impact on promoting power battery and automotive safety.

SMM New Energy Industry Research Department

Cong Wang 021-51666838

Xiaodan Yu 021-20707870

Rui Ma 021-51595780

Disheng Feng 021-51666714

Yujun Liu 021-20707895

Yanlin Lü 021-20707875

Zhicheng Zhou 021-51666711

Haohan Zhang 021-51666752

Zihan Wang 021-51666914

Xiaoxuan Ren 021-20707866

Yushuo Liang 021-20707892

Jie Wang 021-51595902

Yang Xu 021-51666760

Boling Chen 021-51666836

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM‘s internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or to learn more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
Beijing Launches 500-kV Power Project in Fengtai, Boosting Grid Resilience and Industrial Growth
9 hours ago
Beijing Launches 500-kV Power Project in Fengtai, Boosting Grid Resilience and Industrial Growth
Read More
Beijing Launches 500-kV Power Project in Fengtai, Boosting Grid Resilience and Industrial Growth
Beijing Launches 500-kV Power Project in Fengtai, Boosting Grid Resilience and Industrial Growth
On January 28th, the construction of the 500-kilovolt power transmission and transformation project in Fengtai, Beijing officially started. This project is the first newly-built 500-kilovolt power grid project in Beijing during the 15th Five-Year Plan period. It will significantly enhance the resilience and power receiving capacity of the southern Beijing power grid and provide reliable power support for Beijing to continuously optimize the investment structure and vigorously develop high-end, precise, and cutting-edge industries. The 500-kilovolt power transmission and transformation project in Fengtai, Beijing is a key project of Beijing's power grid during the 15th Five-Year Plan period and one of the "3 100" key projects in Beijing this year. It is constructed and managed by the State
9 hours ago
Shaanxi-Anhui UHV DC Project's 500-kV AC System at Hezhou Station Begins Operation After Trial Run
9 hours ago
Shaanxi-Anhui UHV DC Project's 500-kV AC System at Hezhou Station Begins Operation After Trial Run
Read More
Shaanxi-Anhui UHV DC Project's 500-kV AC System at Hezhou Station Begins Operation After Trial Run
Shaanxi-Anhui UHV DC Project's 500-kV AC System at Hezhou Station Begins Operation After Trial Run
On February 1st, the 500-kilovolt AC system of the Hezhou Converter Station, the receiving-end station of the ±800-kilovolt UHV DC power transmission project from northern Shaanxi to Anhui, was officially put into operation after a 24-hour trial run.
9 hours ago
750-kV Power Line Connecting Northern to Central Shaanxi Fully Operational
9 hours ago
750-kV Power Line Connecting Northern to Central Shaanxi Fully Operational
Read More
750-kV Power Line Connecting Northern to Central Shaanxi Fully Operational
750-kV Power Line Connecting Northern to Central Shaanxi Fully Operational
On February 2nd, the 750-kilovolt power transmission and transformation project of the third passageway from northern Shaanxi to central Shaanxi was fully connected. The project starts from the 750-kilovolt Shuofang Substation in Shenmu City in the north and ends at the 750-kilovolt Bailuyuan Substation in Lantian County in the south. It has newly built a 1,271-kilometer line, passing through 18 counties (districts) in 4 cities including Yulin, Yan'an, Weinan and Xi'an.
9 hours ago