Some Basic Knowledge About Copper Scrap: Do You Know?

Published: Aug 22, 2024 09:59

Source: SMM

Save

Copper scrap, as an important renewable resource, holds a significant position in the copper industry chain.

Copper scrap, as an important renewable resource, holds a significant position in the copper industry chain. The main sources of copper raw materials in China include domestically produced and imported copper concentrate, imported copper anode, and recycled copper anode scrap. According to SMM data, in 2023, the smelting volume of copper scrap accounted for as much as 13.42% of China's copper raw material supply.

There are many types of copper scrap, which can be classified into several different categories based on their source, copper content, and other factors:

1. Classification by Source

New Copper Scrap: This type of copper scrap mainly comes from waste generated during the production, processing, and utilization of copper, such as slag and anode mud from the smelting process, and industrial defective goods and off-cuts from the processing process. Most new copper scrap is recycled internally by the factories that produce the waste and does not flow into the market in large quantities.

Old Copper Scrap: Old copper scrap refers to discarded copper-containing products after use, such as wires and cables, old household appliances, and construction waste. After being recycled and dismantled, these copper scraps become an important source of copper metal.

2. Classification by Copper Content

Bare bright copper consists of clean, uncoated, unplated, and non-oxidized pure copper wire; copper cable scrap (Cu＞99.5%) includes low-voltage and high-voltage copper cable scrap; motor copper, also known as enamelled wire, is used to generate motor coils and has an insulating varnish on the surface. After recycling, it can be used to manufacture new enamelled wire or other electronic components. #1 copper scrap mainly consists of oxygen-free copper, oxidized copper, and other metal impurities, with the oxygen-free copper content being greater than 99.95%. #2 copper scrap has a higher content of metal impurities such as iron, tin, nickel, and zinc, and a lower copper content than No. 1 copper scrap. Copper granules are small particles recovered from old wires and cables, mainly used for smelting or recycling, and are classified into #1, #2, and #3 copper granules.

In addition, brass, which is a copper-zinc alloy, is also widely circulated in the market, mainly sourced from imports. The prices of brass vary by country, with the best brass being American brass, followed by European brass, Southeast Asian brass, etc.

In summary, there are many types of copper scrap. These copper scraps have different characteristics and usage values in the recycling and reuse process, making them an important resource for promoting the sustainable development of the copper industry chain.

Market review

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn

For more information on how to access our research reports, please contact:service.en@smm.cn

Related News

4 hours ago

Yingkou Jianfa Shenghai Phase I 300,000 mt Copper Cathode Project Smelting Furnace Starts Production, Pyrometallurgy System Enters Furnace Drying Stage

At 9:58 on September 12, the core smelting furnace of the pyrometallurgy system at Yingkou Jianfa Shenghai Nonferrous Metals & Chemicals Co., Ltd.'s multi-metal recovery project was successfully ignited, officially entering the furnace drying stage and marking a key step toward full-line commissioning and production. Public information shows that the Yingkou Jianfa Shenghai polymetallic complex gold-silver ore comprehensive recovery technology upgrade, relocation, and expansion project uses copper concentrates as its main raw material, with an overall planned capacity of 600,000 mt/year of copper cathode to be built in two phases, with capacity of 300,000 mt/year in each phase. Phase I is designed to produce 300,000 mt/year of copper cathode and 1.18 million mt/year of sulphuric acid, along with supporting systems for smelting, converting, anode refining, electrolysis, slag beneficiation, and precious metal recovery. After this ignition, the project will carry out standardized furnace drying and hot-state integrated trial runs across the entire system to verify equipment, instruments, interlocks, and automatic control systems. The project has not yet formally started raw material feeding and production; after furnace drying and system commissioning are completed, it will further advance the commissioning of Phase I's 300,000 mt/year copper cathode capacity. If the project is successfully brought into production, it is expected to increase copper smelting capacity in North China and further boost domestic demand for copper concentrate raw materials.

4 hours ago

19 hours ago

Alchemy Resources Starts Drilling Copper-Gold Targets at Yellow Mountain

Alchemy Resources announced on September 11 that reverse-circulation drilling has commenced across its Yellow Mountain and Overflow projects in New South Wales, Australia, with up to 15 holes planned during the latest exploration campaign. At the 80%-owned Yellow Mountain project, drilling will test extensions to previously identified copper-gold and polymetallic mineralisation, as well as two previously undrilled geophysical targets. Previous drilling at Yellow Mountain returned an intersection of 113 metres grading 1.17% copper equivalent, comprising 0.33% copper, 0.37 g/t gold, 24.3 g/t silver, 0.86% lead and 1.23% zinc. The latest drilling campaign is designed to test whether the known mineralised system extends into newly identified target areas. The program will also include drilling at the Overflow project, where Alchemy is targeting extensions to existing mineralisation along strike and at depth. Overflow currently hosts an inferred mineral resource of approximately 342,000 ounces of gold equivalent and contains gold, silver, copper, lead and zinc mineralisation. The commencement of drilling provides a near-term test of the scale and continuity of mineralisation at Yellow Mountain. The previously reported broad copper-gold-polymetallic intersection indicates potential for a sizeable mineralised system, while the newly defined geophysical targets provide additional exploration upside. Drilling results will be important in determining whether the mineralised footprint can be materially expanded.

19 hours ago

Freeport CEO Signals Likely Go-Ahead for $4.5 Billion Bagdad Copper Expansion

Freeport-McMoRan Chief Executive Officer Kathleen Quirk has indicated that the company expects to move forward with the proposed expansion of its Bagdad copper mine in Arizona, marking a stronger commitment to the project ahead of a formal investment decision. Speaking at the Jefferies Global Industrials Conference on September 10, Quirk said the project still requires input from Freeport's board but that she expects the company will proceed. She described the expansion as a roughly three-year construction project and noted that no major permitting hurdles are expected. Freeport's latest project estimates put capital expenditure for the Bagdad expansion at approximately US$4.5 billion, around 30% above the previous US$3.5 billion estimate, reflecting cost escalation, scope changes and additional engineering. The project would more than double concentrator capacity at Bagdad and is expected to add approximately 200–250 million lb, or around 91,000–113,000 tonnes, of copper production annually, alongside an additional 10–12 million lb of molybdenum. Bagdad currently has a reserve life exceeding 80 years. Freeport's Q2 2026 regulatory filing had described the project as being prepared for a potential investment decision during the second half of 2026. The latest comments therefore represent a more positive signal from management on the likelihood of development, although formal board approval has not yet been announced. A decision to proceed with Bagdad would represent one of Freeport's most significant near-term copper growth investments in the US. The potential addition of more than 90,000 tonnes per year of copper would materially increase Freeport's US output, although first production would remain several years away given the expected construction period. Attention will now turn to formal board approval and a final investment decision.

19 hours ago