SMM Morning Comment For SHFE Base Metals On Apr 12

Publié: Apr 12, 2024 10:17
Source: SMM
LME copper prices opened at $9371.5/mt and closed 0.39% lower at $9361/mt overnight, with the low-end of $9312.5/mt and the high-end of $9416/mt.

SHANGHAI, Apr 12 (SMM) –

Copper

LME copper prices opened at $9371.5/mt and closed 0.39% lower at $9361/mt overnight, with the low-end of $9312.5/mt and the high-end of $9416/mt. The trading volume was 20,000 lots, and open interest stood at 327,000 lots. The most active SHFE 2102 contract prices opened at 76280 yuan/mt and closed at 76080 yuan/mt last evening, down 0.20%, with the high-end of 76410 yuan/mt and the low-end of 75830 yuan/mt. Trading volumes stood at 53,000 lots and open interest stood at 199,000 lots. On the macro level, the annual PPI rate in the United States was 2.1% in March. After the data was released, the possibility of the Federal Reserve cutting interest rates in July increased slightly, and the US dollar index was under certain pressure. But then the ECB kept interest rates unchanged, hinting at an imminent rate cut, and the U.S. dollar subsequently rose again, remaining at a high level, suppressing copper prices. In terms of fundamentals, from the supply side, the supply remains sufficient, and after delivery next week, it is expected that a certain amount of warehouse receipts will be offered for sale. In terms of consumption, the price spread between front-month and next-month contracts is relatively large as delivery approaches, resulting in a slight rebound in premiums and discounts. Actual transactions have not seen a significant recovery, and downstream purchasing was still relatively poor. On Fundamentals, as of Thursday April 11, SMM copper inventories across major Chinese markets stood at 405,200 mt, up 3,700 mt from Monday and 17,200 mt from a week earlier, 215,100 mt higher than the same period last year. Overall, the US dollar remains strong, but according to foreign media reports on the 11th, satellite monitoring data showed that the operation of global copper smelters in March declined compared with the previous two months, and idle production capacity increased. This will bolster copper prices today.

Aluminum

Overnight, the most-traded SHFE 2406 aluminum contract opened at 20,425 yuan/mt, with the highest and lowest prices at 20,510 yuan/mt and 20,380 yuan/mt before closing at 20,460 yuan/mt, flat from the previous trading day. LME aluminum opened at $2,463/mt in the previous trading day, with its high and low at $2,482/mt and $2,443/mt respectively before closing at $2,457/mt, down $14/mt or 0.57%.

Summary: On the macro level, the recent strong employment data and high inflation data further delayed the Fed's interest rate cut expectations, and favourable policies such as "trade in" in China have been introduced. Fundamentally, the domestic aluminum operating capacity was recovering slowly. On the demand, high aluminum price suppressed downstream purchasing enthusiasm and operating rate. The spot discounts sustained, but driven by the destocking of aluminum ingots, the discounts may narrow. Overall, the aluminum prices stayed at highs due to growing expectations of US economic recovery and positive fundamentals, and may swing on a strong note. We need to pay attention to impact of high prices on downstream procurement and changes in domestic inventory.

Lead

Overnight, LME lead prices opened at $2162.5/mt overnight. The contract finally closed at $2141/mt, a decrease of 0.76%.

Overnight, the most active SHFE 2406 lead contract opened at 16690 yuan/mt. Due to the growth in lead warrants inventory, SHFE lead dropped to a low of 16615 yuan/mt. The contract closed at 16645 yuan/mt, a decrease of 0.48%. Open interest stood at 62791 lots, an increase of 1996 lots from the previous trading day.

Zinc

Overnight, LME zinc opened at US$2,750.5/ton. After a brief decline at the beginning of the session, it quickly rose, reaching a high of US$2,788/ton, finally closing at US$2,767/ton, an increase of US$16/ton, or 0.58%. The trading volume decreased to 16,082 lots, and open interest increased by 1,990 lots to 250,000 lots. LME zinc inventory has not changed. As US PPI data has boosted expectations for rate cuts, LME zinc may have further upside room.

The most active SHFE 2406 zinc contract fell to a low of 22540 yuan/mt after opening at 22800 yuan/mt, and finally closed at 22715 yuan/mt, down 155 yuan/mt or 0.68%. Trading volume was down to 130,000 lots, and open interest grew by 1962 lots to 125,000 lots. Affected by the expected improvement in future downstream demand, the macro sentiment was relatively positive. However, zinc prices were too high and downstream purchases were poor, and inventories increased again, suppressing the upward momentum of SHFE zinc.

Tin

Overnight, SHFE 2405 tin contract fell sharply, closing at 244,280 yuan/mt, down 1.47%.

Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 800-2,000 yuan/mt for SHFE 2405 tin contract, versus discounts of 0-800 yuan/mt for delivery brands and premiums of 200-300 yuan/mt for Yunxi brand. Tin prices remained at a high level, but due to the low inventory, some downstream enterprises restocked only as needed. Few deals were heard among traders.

Nickel

On Thursday, the most-traded SHFE nickel contract opened at 141,970 yuan/mt, and closed at 139,610 yuan/mt, down 70 yuan/mt compared with the last trading day. Trading volume increased by 13,042 lots to 273,596 lots, and open interest decreased by 6,391 lots to 75,201 lots. The most-traded SHFE nickel contract fluctuated greatly after opening. In the afternoon, it experienced a sharp drop to the lowest at 138,700 yuan/mt and then rapidly rebounded, with the final increase of 0.26%.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 10 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 10 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 10 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 10 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 12 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 12 heures
SMM Morning Comment For SHFE Base Metals On Apr 12 - Shanghai Metals Market (SMM)