Due to lithium carbonate price fluctuations, internal competition among manufacturers, weakened downstream demand, and delays, the overall energy storage installations in 2023 were weaker than expected. Based on energy storage installation targets and policy advancements, it is conservatively estimated that the cumulative installation capacity of new energy storage will reach 97GWh by 2027, with an annual compound growth rate of 49.3% from 2023 to 2027.
- Overview of the energy storage market
The energy storage market in 2023 faced challenges due to fluctuations in lithium carbonate prices, intense competition among manufacturers, and weakened downstream demand, leading to overall installations falling short of expectations. Despite these setbacks, the sector is poised for significant growth, driven by installation targets and policy support. A conservative estimate projects that the cumulative installation capacity for new energy storage will reach 97 GWh by 2027, with an annual compound growth rate of 49.3% from 2023 to 2027. This outlook suggests a robust recovery and expansion in the energy storage market, underscoring its critical role in the global transition to renewable energy and the stabilization of electrical grids.
- All-vanadium explained
The principle of all-vanadium redox flow energy storage involves using vanadium salt solutions as the liquid electrolyte for both the positive and negative electrodes. The energy storage active substances in both the positive and negative electrode electrolytes are vanadium ions. The conversion of chemical energy into electrical energy is achieved through redox reactions of vanadium oxides or compounds, gaining or losing electrons. Energy storage and release are realized through the change in valence states of vanadium ions in the electrolytes. The active materials for both the positive and negative electrodes of all-vanadium redox flow batteries are vanadium compounds. The redox couples for the electrodes are VO2+/VO2+ for the positive electrode and V3+/V2+ for the negative electrode, with the active materials being sulfate salts of vanadium ions in different valence states, and the electrolyte matrix using a sulfuric acid aqueous solution.
During discharge when the battery is fully charged, the active material at the positive electrode undergoes a reduction reaction: VO2+ + e → VO2+, with a standard potential of +1.004 V; the active material at the negative electrode undergoes an oxidation reaction: V2+ → V3+ + e, with a standard potential of -0.255 V. The overall cell reaction can be combined as: VO2+ + V2+ → VO2++ V3+, with an open-circuit voltage of 1.259 V, representing the process where pentavalent vanadium ions oxidize divalent hydrated vanadium ions to trivalent hydrated vanadium ions, while being reduced to tetravalent vanadium oxide ions themselves. Electrons travel from the negative electrode, through the external circuit, to the positive electrode. The charging process is the reverse of this. In practice, due to complex factors such as overpotential, the open-circuit voltage of all-vanadium redox flow batteries is generally between 1.5 to 1.6 V.
- Advantages of all-vanadium redox flow energy storage
All-vanadium redox flow energy storage systems, alongside other emerging technologies such as sodium-ion, molten salt, and lithium iron phosphate (LFP) batteries, are making rapid strides in commercialization. Compared to LFP batteries, all-vanadium redox flow batteries may have a lower overall energy density, but they boast up to 20,000 charge-discharge cycles with virtually no capacity degradation over their lifecycle. As the share of new energy generation increases, with its inherent instability and intermittency, there is a growing need for longer-duration energy storage systems.
Vanadium batteries offer numerous advantages, including high safety, large storage scale, long cycle life, recyclability of electrolytes, cost-effectiveness over cycles, and the capability for 100% deep discharge. Additionally, their output power and storage capacity are independent of each other, leading to decreasing marginal costs with extended duration; they are flexible in design and installation, making them suitable for large-scale, high-capacity, long-duration storage applications; and the modular design of the storage system facilitates easy system integration and scalability.
If you have any questions regarding the industry data, or the news (e.g. how this can affect your business). Please feel free to reach out to me:
Robin He
SMM Li-ion Battery Materials Department
E: robinhe@smm.cn | T: +86-21-51595884
For queries, please contact William Gu at williamgu@smm.cn
For more information on how to access our research reports, please email service.en@smm.cn