German industrial production continues downward spiral, marking fifth consecutive monthly decline in September'23

Đã xuất bản: Nov 9, 2023 18:21
A disappointing data release not only hints at a potential downward revision of third-quarter GDP growth but also raises concerns that the industry-heavy German economy may enter a technical recession by the end of 2023.

A disappointing data release not only hints at a potential downward revision of third-quarter GDP growth but also raises concerns that the industry-heavy German economy may enter a technical recession by the end of 2023.
German industrial production continues downward spiral
Germany's ongoing macroeconomic struggles persist, raising doubts among the younger generation about the last time the country witnessed a sustained period of positive macroeconomic indicators. Unfortunately, September's latest industrial production data only adds to this worrisome trend. This marks the fifth consecutive month of decline, with a month-on-month drop of 1.4 per cent, in contrast to August's meagre -0.1 per cent. Year-on-year, industrial production has slumped by 3.7 per cent, affecting all major sectors of the economy.
On September 8, 2023, AL Circle reported that Germany witnessed a notable decrease in aluminium production during the third quarter of the year. In the smelters, the primary aluminium production volume dropped by nearly 50 per cent, and the manufacturing of semi-finished aluminium products saw a decline in the high single-digit percentage range.
Report on Global Aluminium Industry Key Trends to 2030
The nation's industrial production remains over 7 per cent below its pre-pandemic level despite more than three years having passed since the onset of the Covid pandemic. Specifically, production in energy-intensive sectors has declined by more than 8 per cent compared to September of the previous year, as reported by ING Think.
The likelihood of ending the year in a technical recession remains quite significant. Looking forward, the leading economic indicators for October do not paint a favourable picture for future production. Despite a brief stabilization in September, production expectations and survey-based assessments of order books have once again weakened in October. While inventories have decreased somewhat, they remain at elevated levels. Furthermore, recent data on industrial orders for September confirmed a bleak economic outlook. German industrial production is likely to remain stagnant rather than gaining momentum in the near future.
Based on the latest data, industrial production would need to increase by a minimum of 2 per cent month-on-month in the upcoming months to steer production back into positive territory in the fourth quarter. While concrete data for the fourth quarter is not available yet, recent developments have significantly heightened the risk of the German economy ending the year in a recession.
source:https://www.alcircle.com/news/german-industrial-production-continues-downward-spiral-marking-fifth-consecutive-monthly-decline-in-september-23-101895

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Giá nhôm Nam Xương giảm, phí gia công giảm 70 NDT/tấn vào ngày 3/9
22 phút trước
Giá nhôm Nam Xương giảm, phí gia công giảm 70 NDT/tấn vào ngày 3/9
Đọc thêm
Giá nhôm Nam Xương giảm, phí gia công giảm 70 NDT/tấn vào ngày 3/9
Giá nhôm Nam Xương giảm, phí gia công giảm 70 NDT/tấn vào ngày 3/9
Ngày 3/9, phôi nhôm Nam Xương Φ90 được báo giá 24.450 NDT/tấn, phí gia công 100 NDT/tấn (giảm 70 NDT so với phiên giao dịch trước); Φ120 ở mức 24.400 NDT/tấn, phí gia công 50 NDT/tấn (giảm 70 NDT); Φ178 ở mức 24.400 NDT/tấn, phí gia công 50 NDT/tấn (giảm 70 NDT). Giá nhôm giao ngay SMM A00 đứng ở mức 24.350 NDT/tấn.
22 phút trước
Giá phôi nhôm Vô Tích và phí gia công giảm vào ngày 3 tháng 9
22 phút trước
Giá phôi nhôm Vô Tích và phí gia công giảm vào ngày 3 tháng 9
Đọc thêm
Giá phôi nhôm Vô Tích và phí gia công giảm vào ngày 3 tháng 9
Giá phôi nhôm Vô Tích và phí gia công giảm vào ngày 3 tháng 9
Ngày 3/9, nhôm phôi Vô Tích Φ90 được báo giá 24.630 NDT/tấn, phí gia công 280 NDT/tấn (giảm 50 NDT so với phiên giao dịch trước); Φ120 ở mức 24.540 NDT/tấn, phí gia công 190 NDT/tấn (giảm 50 NDT); Φ178 ở mức 24.530 NDT/tấn, phí gia công 180 NDT/tấn (giảm 50 NDT). Giá nhôm giao ngay SMM A00 đạt 24.350 NDT/tấn.
22 phút trước
Giá nhôm Phật Sơn giảm, phí gia công giảm vào ngày 3 tháng 9
22 phút trước
Giá nhôm Phật Sơn giảm, phí gia công giảm vào ngày 3 tháng 9
Đọc thêm
Giá nhôm Phật Sơn giảm, phí gia công giảm vào ngày 3 tháng 9
Giá nhôm Phật Sơn giảm, phí gia công giảm vào ngày 3 tháng 9
Ngày 3/9, nhôm thanh Φ90 tại Phật Sơn được báo giá 24.550 nhân dân tệ/tấn, phí gia công 0 nhân dân tệ/tấn (giảm 60 nhân dân tệ so với ngày giao dịch trước); Φ120 ở mức 24.500 nhân dân tệ/tấn, phí gia công -50 nhân dân tệ/tấn (giảm 60 nhân dân tệ); Φ178 ở mức 24.500 nhân dân tệ/tấn, phí gia công -50 nhân dân tệ/tấn (giảm 60 nhân dân tệ). Giá nhôm giao ngay SMM A00 (Phật Sơn) ở mức 24.550 nhân dân tệ/tấn.
22 phút trước