SMM Morning Comment For SHFE Base Metals November 6

Published: Nov 06, 2023 09:43 (GMT+8)
Source: SMM
LME copper prices opened at $8118/mt and closed at $8168.5/mt in last Friday evening trading, a decline of 0.13%, with the low-end of $8118/mt and the high-end of $8210/mt.

SHANGHAI, November 6(SMM) –SHANGHAI, November 6(SMM) –
Copper
LME copper prices opened at $8118/mt and closed at $8168.5/mt in last Friday evening trading, a decline of 0.13%, with the low-end of $8118/mt and the high-end of $8210/mt. Trading volume was 21,000 lots, and open interest stood at 262,000 lots. The most active SHFE 2312 copper contract prices opened at 67640 yuan/mt and closed at 67360 yuan/mt last evening, down 0.47%, with the high-end of 67310 yuan/mt and the low-end of 67650 yuan/mt. Trading volumes stood at 32,000 lots and open interest stood at 150,000 lots. On the macro front, the U.S. non-farm payrolls increased by 150,000 after seasonally adjustment in October, the smallest increase since June. Market expectations were for 180,000. The total number of new jobs in August and September was 101,000 lower than before the revision. Domestically, Vice Minister of Commerce Sheng Qiuping hosted a roundtable meeting for foreign-invested enterprises in Shanghai and mentioned that restrictions on foreign investment access in the manufacturing sector will be completely lifted. SMM data showed that as of Friday November 3, copper inventory across major Chinese markets stood at 63,700 mt, up 4,800 mt from last Monday and down 4,300 mt from two Fridays ago. The inflow of imported copper in East China replenished spot resources which, coupled with high copper prices at the end of the month, reduced downstream demand and reduced inventories; inventories in South China reached a new low, mainly due to the decline in output of surrounding smelters and the impact of maintenance. In terms of consumption, downstream wait-and-see sentiment has intensified after the copper price rebounded, and demand is expected to weaken. Copper prices are expected to remain rangebound as the market is cautious.
Aluminum
The most-traded SHFE 2312 aluminum contract opened at 19195 yuan/mt at last Friday’s night session, with its low and high at 19160 yuan/mt and 19260 yuan/mt before closing at 19195 yuan/mt, flat from the previous trading day. LME aluminum opened at $2232.5/mt last Friday, with its low and high at $2229.5/mt and $2260/mt respectively before closing at $2256.5/mt, up 0.98%.
The Federal Reserve's pause in rate hikes meets market expectations, yet high inflation abroad raises concerns about weak foreign demand. Despite domestic policy boosts, the industrial chain impact will take time. Fundamentally, Yunnan region's aluminium production cuts have started, relieving future domestic supply pressure. Yet, with poor consumer performance and weak demand, domestic aluminium ingot inventory grew and spot prices maintained discount against SHFE. Soft demand will counteract positive impact from production cuts. Therefore, SHFE aluminium will lack upward momentum.
Lead
Inventory boosted LME lead to a new high in nearly 7 months
SHANGHAI, Nov 6 (SMM) -
LME lead prices opened at $2128/mt last Friday evening. Entering the European session, LME lead stocks unexpectedly dropped. LME lead rose strongly, reaching a maximum of US$2,174/ton, setting a new high in the past month, until it finally closed at US$2,172.5/ton in late trading, an increase of 2.09%.
The most active SHFE 2312 lead contract prices opened at 16670 yuan/mt last Friday evening and finally closed at 16635 yuan/mt, an increase of 0.51%. Open interest increased 141 lots to 16635 lots.
Zinc
SMM Zinc Morning Comment
Last Friday, the U.S. non-farm payrolls increased by 150,000 in October after seasonally adjustment, the smallest increase since June. Market expectations were for 180,000. The total number of new jobs in August and September was 101,000 lower than before the revision. The monthly unemployment rate recorded 3.9%, the highest level since January 2022, and market expectations were 3.8%. After the non-farm data was released, federal funds futures prices showed that the possibility of the Federal Reserve raising interest rates by January next year dropped to less than 20%. Swap market prices show that the Federal Reserve's first interest rate cut is expected to be brought forward to June next year, compared with July next year. Atlanta Fed President Bostic was satisfied with the non-farm payrolls data released on Friday and may support maintaining the current interest rate level for about 8-10 months. Minneapolis Fed President Neel Kashkari: While the slowdown in hiring is good news for the Fed, it doesn’t want to overreact to one month’s data. Richmond Fed President Barkin: Views on whether to raise interest rates again will depend more on the inflation report. Former U.S. Treasury Secretary Summers also warned investors not to rush to declare that the Fed's work is done. Vice Minister of Commerce Sheng Qiuping hosted a roundtable meeting for foreign-invested enterprises in Shanghai and mentioned that restrictions on foreign investment access in the manufacturing sector will be completely lifted.
LME zinc opened at $2471.5/mt last Friday evening and closed up $35/mt or 1.43% at $2515.5/mt. Trading volume decreased to 6298 lots, and open interest increased by 347 lots to 200,000 lots. LME zinc inventory shed by 3625 mt to 78575 mt. The U.S. non-farm payrolls increased by 150,000 in October after seasonally adjustment, the smallest increase since June, increasing market expectations for the end of the Federal Reserve's interest rate hikes. The U.S. dollar fell to recent lows.
The most traded SHFE 2312 opened lower at 21440 yuan/mt and closed at 21400 yuan/mt overnight, down 20 yuan/mt or 0.09%. The trading volume was down to 47767 lots, and open interest added 1071 lots to 86775 lots. The market's continuous poor trading lowered the operating rate of the zinc downstream sector.
Tin
SHFE 2312 tin contract fell to 207090 yuan/mt at last Friday’s night session and then bounced back a little, closing at 208140 yuan/mt, up 0.93%.
During the early trading last Friday, spot premiums and discounts in domestic spot market for various tin ingot brands changed little. Small brand tin ingots were offered at premiums of 300-600 yuan/mt over SHFE 2312 tin contract, versus premiums of 500-800 yuan/mt for delivery brands, premiums of 1000-1200 yuan/mt for Yunxi brand, and discounts of 100-400 yuan/mt for imported brand tin ingots. The price of tin began to rebound last Friday, and the willingness of downstream companies in purchasing goods declined slightly. The spot market transactions were thin on the afternoon of last Friday.
Nickel
On the macro front, the Fed Reserve said in a statement that it will keep key rates unchanged at 5.25-5.50% last Thursday evening. Fed Chair Powell mentioned, "slowing down is giving us I think a better sense of how much more we need to do. If we need to do more." This indicates that the current inflation hasn’t yet reached the desired level of 2%, with the Personal Consumption Expenditures Price Index, a key inflation metric for the Fed, showing a 3.4% year-on-year increase in September, significantly higher than 2%. Therefore, the Fed hasn’t moved towards lowering interest rates. Additionally, last week, the Ministry of State Security mentioned the need to be cautious of "short sellers", "bearish speculators", "fearmongers", and "asset strippers". Due to positive macro sentiment, SHFE nickel rebounded on last Friday. Looking at the fundamentals, social inventories of nickel increased by over 1,000 mt last week. Pure nickel inventories have been increasing since the third quarter. This primarily stems from the continuous increase in production of electrowinning nickel. The new electrowinning nickel are cheaper compared to Norilsk nickel and are of a similar quality, leading to a decline in the competitiveness of Norilsk nickel in the spot market. Consequently, this has resulted in a continuous accumulation of inventories. Additionally, based on SMM research, some domestic nickel plate traders are currently unwilling to continue signing long-term agreements for Norilsk nickel due to the impact of electrowinning nickel. From the demand side, demand remained weak last week, with poor transactions in the spot market. The main reason is the high downstream buying sentiment in September, leading to ample nickel plate stocks in October. Earlier, nickel prices showed a downward trend, causing some downstream buyers to continue bearish on nickel prices. Consequently, with stocks yet to clear and the downstream sentiment staying negative, recent spot market transactions have been dull. In summary, the current nickel fundamentals remain weak, but the overall negative sentiment is easing. Additionally, downstream stocks are expected to decrease, combined with a potential nickel price rebound, leading to potential concentrated purchasing in the future.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
KGHM and South32 launch US$725m Sierra Gorda expansion, lifting copper capacity 26%
4 hours ago
KGHM and South32 launch US$725m Sierra Gorda expansion, lifting copper capacity 26%
Read More
KGHM and South32 launch US$725m Sierra Gorda expansion, lifting copper capacity 26%
KGHM and South32 launch US$725m Sierra Gorda expansion, lifting copper capacity 26%
KGHM and South32 have broken ground on a fourth grinding line at the Sierra Gorda copper-molybdenum mine in Chile's Atacama region. The US$725 million expansion runs for three years from January 2027, with completion by late 2029 and full output in H2 2030. Ore processing capacity rises 26%, from 131,000 tonnes per day to 165,000 tpd. Annual copper output is projected to climb from 165,000 tonnes in 2025 to 195,000 tonnes, with 6,000 tonnes of molybdenum, 58,000 ounces of gold and 1.7 million ounces of silver as by-products. The project creates over 900 direct jobs and is funded from operating cash flow and debt. Unit operating costs are expected to fall about 10%.
4 hours ago
Emerita Extends Final Review of Iberian Belt West PFS, Release Expected in Coming Weeks
5 hours ago
Emerita Extends Final Review of Iberian Belt West PFS, Release Expected in Coming Weeks
Read More
Emerita Extends Final Review of Iberian Belt West PFS, Release Expected in Coming Weeks
Emerita Extends Final Review of Iberian Belt West PFS, Release Expected in Coming Weeks
Emerita Resources has provided an update on the Preliminary Feasibility Study (PFS) for its Iberian Belt West polymetallic project in Spain, saying the study is well advanced but remains under final technical review.​ The company said the review process has been expanded to include additional technical and quality-assurance oversight before publication. As a result, Emerita now expects the PFS to be released in the coming weeks rather than within the previously indicated timeframe.​ Iberian Belt West hosts copper, zinc, lead, gold and silver mineralization and is one of Emerita’s principal development-stage assets in Spain. The PFS is expected to provide updated detail on the proposed mine plan, processing configuration, capital requirements, operating costs and project economics.​ Emerita said the additional review work is intended to ensure consistency and completeness across the technical disciplines contributing to the study before it is finalized.​ The company did not announce a revised specific publication date, and no new production, capital or economic figures were disclosed in the latest update.​ The extended review delays the next major technical milestone for Iberian Belt West, but the company continues to indicate that the PFS is nearing completion. For the copper market, the significance of the study will depend on the production profile and project economics ultimately disclosed, particularly the contribution of copper relative to the project’s other payable metals. Attention will therefore remain on the timing of the PFS release and whether the final study materially changes the project’s development outlook.
5 hours ago
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
5 hours ago
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
Read More
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
Cascadia Minerals has reported additional drill results from its 2026 exploration programme at the Carmacks copper-gold project in Yukon, Canada, with new step-out drilling extending mineralization at Zone 2000S beyond the boundaries of the existing Mineral Resource.​ Drill hole CD-26-058 returned 75.55 metres grading 1.19% copper, 0.97 g/t gold, 10.4 g/t silver and 335 ppm molybdenum, equivalent to 2.18% copper-equivalent. The interval included 48.66 metres grading 1.61% copper, 1.39 g/t gold, 15.1 g/t silver and 475 ppm molybdenum, equivalent to 3.03% CuEq.​ Within the same hole, a higher-grade interval of 14.50 metres returned 2.30% copper, 2.68 g/t gold, 29.5 g/t silver and 1,015 ppm molybdenum, equivalent to 5.08% CuEq.​ A second hole, CD-26-059, intersected 93.99 metres grading 0.96% copper, 0.70 g/t gold, 4.6 g/t silver and 919 ppm molybdenum, equivalent to 1.94% CuEq. This included 63.97 metres at 1.26% copper, 0.96 g/t gold, 6.3 g/t silver and 1,049 ppm molybdenum, equivalent to 2.52% CuEq.​ Cascadia said the latest results continue to expand mineralization at Zone 2000S beyond the limits of the current Mineral Resource and highlight the higher-grade nature of the extension. The reported drill intervals represent drilled thicknesses, with true widths estimated at approximately 60–70%.​ The latest step-out results indicate that copper-gold mineralization at Zone 2000S extends beyond the boundaries of the current Carmacks Mineral Resource. The broad intervals and higher-grade internal zones could support future resource expansion if additional drilling confirms continuity. However, the new intersections have not yet been incorporated into an updated Mineral Resource Estimate, meaning their ultimate impact on project scale and mine planning remains to be determined.
5 hours ago