Conversion Margins of Aluminium Billets in South China May Rebound As Aluminium Inventory Accumulation Misses Expectations

Publicado: Jan 29, 2023 15:56 (GMT+8)
Fuente: SMM
SMM predicts that the aluminium billet inventory will surge high before falling rapidly, while conversion margins will fluctuate upwards.

SHANGHAI, Jan 29 (SMM) - According to SMM statistics, as of January 29, 2023, the domestic aluminium inventory was 929,000 mt, an increase of 185,000 mt compared with the pre-holiday inventory (January 19). The domestic inventory of aluminium billets added 35,300 mt to 167,200 mt. In south China, the inventory of aluminium ingots stood at 198,700 mt, an increase of 43,400 mt, and the inventory of aluminium billets stood at 83,700 mt, up 16,800 mt. SMM estimates that the inventory of aluminium ingots in south China will be close to 215,000 mt on January 30, the first trading day after the Chinese New Year (CNY) holiday, with an increase of 60,000 mt. Meanwhile, the aluminium billet inventory will gain about 20,000 mt to reach 90,000 mt. In other words, the total aluminium inventory will rise by 80,000 mt within three days after the production resumption post the CNY holiday. That said, the increase still falls shy of the previous forecast of 115,000 mt.

According to SMM data, the national aluminium billet inventory increased by 35,000 mt or 26.7% during the CNY holiday. Compared with the inventory data during the same period in the past five years, this year's inventory increment ranks only fourth. In other words, the amount of increase is acceptable. In south China, the inventory of aluminium billets stood at 83,700 mt, a relatively low level during the past five years and only higher than that in 2020. In terms of conversion margins, on the last trading day before the CNY holiday, the conversion margins of φ90 and φ120 aluminium billets were 200 yuan/mt and 100 yuan/mt respectively, an absolute low level compared with the data in the past two years.

In the past two years, the aluminium billet inventory showed an inverted V-shaped trend during the CNY holiday. Although the inventory usually climbed after the holiday, it will immediately fall from highs. In contrast, the conversion margins usually show an upward trend after the CNY holiday.  

What about post-holiday inventory and conversion margins this year?

SMM predicts that the previous pattern will remain this year. Specifically, the aluminium billet inventory will surge high before falling rapidly, while conversion margins will fluctuate upwards. The reasons are as follows. First, the current conversion margins are low, which indicates a sufficient upward room for rebound. As the accumulation of stocks during the holiday misses the expectation, the market is confident that conversion margins will pick up after the holiday without the pressure of high inventory. Second, the economy is sure to recover with the pandemic under control, and the consumption is likely to pick up. Before the holiday, most downstream extrusion factories took holidays early without restocking in advance, resulting in a sharp drop in the outflows of billets from the social warehouses. The muted trades once triggered bearish sentiment. However, there are signs of an economic recovery and thriving consumption after the holiday. The demand for aluminium billets will rebound with the rising operating rates of extrusion factories. Therefore, it is expected that the aluminium billet inventory will be consumed, though it will take time. Before the holiday the aluminium prices in south China soared above 10,000 yuan/mt, and the most-trade SHFE aluminium contract also showed huge momentum. During the CNY holiday, LME aluminium consolidated at highs and as of January 29 rose by 0.52% compared with pre-holiday. If SHFE aluminium opens high tomorrow and moves sideways at high levels, the conversion margins of aluminium billets in south China will rebound. SMM thinks that the conversion margins of φ120 aluminium billets are likely to return to above 200 yuan/mt.

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
Oferta revisada de prima MJP de CIF para el cuarto trimestre de 2026 por RTA a 280 USD/tm
25 Sep 2026 09:33 (GMT+8)
Oferta revisada de prima MJP de CIF para el cuarto trimestre de 2026 por RTA a 280 USD/tm
Leer más
Oferta revisada de prima MJP de CIF para el cuarto trimestre de 2026 por RTA a 280 USD/tm
Oferta revisada de prima MJP de CIF para el cuarto trimestre de 2026 por RTA a 280 USD/tm
Oferta revisada de prima MJP CIF para el cuarto trimestre de 2026 por RTA a 280 USD/tm (frente a 310 USD/tm). Vigencia: 28 de septiembre de 2026
25 Sep 2026 09:33 (GMT+8)
El laminador de aluminio avanzado de Henan Yirui inicia producción, apuntando al crecimiento en el mercado de alta gama
24 Sep 2026 20:58 (GMT+8)
El laminador de aluminio avanzado de Henan Yirui inicia producción, apuntando al crecimiento en el mercado de alta gama
Leer más
El laminador de aluminio avanzado de Henan Yirui inicia producción, apuntando al crecimiento en el mercado de alta gama
El laminador de aluminio avanzado de Henan Yirui inicia producción, apuntando al crecimiento en el mercado de alta gama
El 20 de septiembre, el laminador desbastador de chapa gruesa del proyecto de fabricación inteligente de nuevos materiales a base de aluminio con capacidad de 720.000 toneladas anuales de Henan Yirui New Materials Technology Co., Ltd. entró oficialmente en producción. Con una inversión total de 1.500 millones de RMB, el proyecto aprovecha la planta existente para construir una línea de laminación en caliente continua "1+4" de nivel internacional, respaldada por equipos de procesamiento de aluminio líderes en la industria, como hornos de recalentamiento de empuje. El proyecto también ha construido un sistema de IoT industrial capaz de monitorear en tiempo real y regular dinámicamente parámetros clave de producción como la fuerza de laminación y la temperatura, garantizando eficazmente la calidad estable de productos de aluminio de alta gama y aumentando continuamente la participación de mercado de productos de alto valor añadido.
24 Sep 2026 20:58 (GMT+8)
Guinea amplía la cooperación minera con Glencore y busca impulsar los ingresos y la industrialización
24 Sep 2026 20:58 (GMT+8)
Guinea amplía la cooperación minera con Glencore y busca impulsar los ingresos y la industrialización
Leer más
Guinea amplía la cooperación minera con Glencore y busca impulsar los ingresos y la industrialización
Guinea amplía la cooperación minera con Glencore y busca impulsar los ingresos y la industrialización
Guinea planea ampliar su cooperación con Glencore en el refinado de alúmina, energía, oro y metales básicos, con el objetivo de aumentar los ingresos mineros, promover el procesamiento local y la industrialización de los recursos minerales, y fortalecer la cooperación con los mercados y las empresas mineras internacionales de China, Oriente Medio y otras regiones.
24 Sep 2026 20:58 (GMT+8)