China’s Bauxite Imports Plummeted 2.56 Million mt MoM in June

Published: Aug 01, 2022 10:55 (GMT+8)
Source: SMM
SHANGHAI, Aug 1 (SMM) - Customs data showed that China imported 9.42 million mt of bauxite in June, down 21.4% MoM and 7.1% YoY.

SHANGHAI, Aug 1 (SMM) - Customs data showed that China imported 9.42 million mt of bauxite in June, down 21.4% MoM and 7.1% YoY. The figure was down a staggering 2.56 million mt from that in May and failed to sustain the monthly imports above 10 million mt recorded in previous months. Imports from Australia were 2.44 million mt, down 21.19% month-on-month and 23.14% year-on-year; imports from Guinea were 5.75 million mt, a decrease of 17.16% month-on-month, but up 9.05% year-on-year; imports from Indonesia were 1.05 million mt, a drop of 40% MoM and 35.8% YoY; imports from Montenegro, Malaysia and Jamaica were 99,400 mt, 36,300 mt and 44,500 mt respectively. China imported a merely 0.04 mt of bauxite from Ghana and 0.02 mt from Cameroon.
Imports from Australia
As the hurricane in Australia disrupted both mining and transportation in June, local mining companies focused on the delivery of long-term orders. Since Australia suffered no extreme weather in July, the production and shipments are expected to have returned to normal.
Imports from Indonesia
Market concerns about a potential export ban by Indonesia have intensified. Most mines in Indonesia have basically run out of their export quotas since June. The shipments under long-term orders have already been shocked, and there has been virtually no spot bauxite available for shipments. Chinese alumina refineries who use Indonesian ore are now seeking Guinean and Australian ore as alternatives. The market is pessimistic that Indonesia may begin to prohibit the exports of bauxite at the end of the year. Although the Chinese alumina industry will not suffer an irreparable trauma if the export ban comes into force, the instability of alumina production will be heightened.  
Imports from Guinea
The rainy season in Guinea falls from May to November, while the dry season begins in December and ends in April. The decline in bauxite imports from Guinea was partly due to the rainy season, which lowered its bauxite output. In addition, the demand for Guinean ore softened slightly after most Chinese alumina refineries who use Guinean ore have stockpiled ore that could sustain 1-3 months of production. Bauxite shipments from Guinea kept refreshing record high in the first half of the year. However, China’s demand for Guinean ore will regain upward momentum after the current stockpiles run out over time. SMM believes that China’s bauxite imports from Guinea will recover after the rainy season in Guinea ends. It is worth noting that the unstable regime and frequent strikes in Guinea will be important factors affecting the mining and shipment of Guinean ore in the future.
On the whole, the decline in bauxite exports from Guinea and Australia in June was caused by bad weather, rather than policy restrictions. SMM predicts that China’s bauxite imports from Australia may have picked up in July along with the recovery of output in the country while imports from Guinea may have continued to fall due to the rainy season. In view of the enormous uncertainty as for when Indonesia will impose a ban on its bauxite exports, it is vital for Chinese alumina refineries to take countermeasures in advance so as to minimise the negative impact. 
 

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
[ADC12 Daily Review] ADC12 Most-Traded Contract Closes Higher; Spot Sentiment Recovers but Demand Improvement Remains Insufficient
41 mins ago
[ADC12 Daily Review] ADC12 Most-Traded Contract Closes Higher; Spot Sentiment Recovers but Demand Improvement Remains Insufficient
Read More
[ADC12 Daily Review] ADC12 Most-Traded Contract Closes Higher; Spot Sentiment Recovers but Demand Improvement Remains Insufficient
[ADC12 Daily Review] ADC12 Most-Traded Contract Closes Higher; Spot Sentiment Recovers but Demand Improvement Remains Insufficient
[ADC12 Price Daily Commentary: Cast Aluminum Most-Traded Contract Closes Higher, Spot Sentiment Recovers but Demand Improvement Remains Insufficient] The most-traded AD2612 cast aluminum alloy futures contract opened at 22,750 yuan/mt today. After briefly shooting up to 22,835 yuan/mt at the open, it pulled back, dipping to a session low of 22,705 yuan/mt in early trading before stabilizing. The price center then gradually climbed, with volume-driven gains before midday pushing it to a session high of 22,915 yuan/mt. It closed at 22,890 yuan/mt at midday, up 200 yuan/mt, or 0.88%, from yesterday's settlement price.
41 mins ago
Jereh Launches Lithium Battery Recycling Project in Jinan, Shandong Province
3 hours ago
Jereh Launches Lithium Battery Recycling Project in Jinan, Shandong Province
Read More
Jereh Launches Lithium Battery Recycling Project in Jinan, Shandong Province
Jereh Launches Lithium Battery Recycling Project in Jinan, Shandong Province
On October 13, the Management Committee of Jinan Start-up Area for Replacing Old Growth Drivers with New Ones in Shandong Province released the first public announcement of the environmental impact assessment for the Jereh Lithium Battery Resource Recycling Project of Jereh Resources Recycling Technology (Jinan) Co., Ltd. The new project is located in the Green New Intelligent Manufacturing Industrial Park on Xiehu Road, Taiping Subdistrict, Jiyang District, Jinan, Shandong Province, specifically in Buildings 14-B# and 15# of Phase II of the green building area. The project is expected to build two production lines: one for dismantling, crushing, and pulverizing 25,000 mt of scrap LFP batteries per year, and another for dismantling, crushing, and pulverizing 60,000 mt of scrap LFP and ternary lithium batteries per year. Major equipment includes battery pack dismantling equipment, crushing equipment, pyrolysis equipment, sorting equipment, and supporting environmental protection facilities. In terms of process, the project adopts procedures including battery pack code-scanning traceability and dismantling, battery cell code-scanning traceability, discharge-free crushing, oxygen-free pyrolysis, and sorting. Exhaust gas generated from crushing and pyrolysis will be sent to supporting waste gas purification facilities for treatment. The final recovered products include black mass, copper products, and aluminum products. Upon completion, the project will have a disposal capacity of 85,000 mt of scrap LFP and ternary lithium batteries per year.
3 hours ago
Gleich Aluminium Upgrades with New IMA Schelling Cutting System, Reducing Scrap and Boosting Efficiency
3 hours ago
Gleich Aluminium Upgrades with New IMA Schelling Cutting System, Reducing Scrap and Boosting Efficiency
Read More
Gleich Aluminium Upgrades with New IMA Schelling Cutting System, Reducing Scrap and Boosting Efficiency
Gleich Aluminium Upgrades with New IMA Schelling Cutting System, Reducing Scrap and Boosting Efficiency
Gleich Aluminium has successfully installed a new IMA Schelling fm 8 sheets & plates cutting system at its plant in Kaltenkirchen, Germany, replacing the original sawing machine. The entire installation was completed in just three weeks while maintaining normal operations. As an enterprise with 150 employees and an annual output of approximately 20,000 mt of aluminum, Gleich Aluminium has a clear need for equipment upgrades. The company's general manager, Sebastian Ricken, pointed out that design details and cost-effectiveness were the key deciding factors in this selection. The new system features intelligent nesting, which can automatically group hundreds of orders by material thickness through software and calculate the optimal cutting plan before processing, thereby keeping the scrap rate below 10%.
3 hours ago