Four major fab plants in Taiwan: the impact of power outage is being confirmed

Published: Mar 03, 2022 16:03 (GMT+8)
[Taiwan's four major wafer plants: the impact of the power outage is being confirmed] on the morning of the 3rd, news of a power outage came out again in Taiwan, saying that the blackout was due to the imbalance between power supply and demand in the south caused by the switch accident at the Xingda power plant. The Bamboo Science Administration said that at present, the known jurisdiction, including science parks such as Chunan and Tonggong, were not affected by the power outage, while the Southern Science Administration said that the voltage drop occurred after 9: 00, and the degree of influence of manufacturers was being checked. TSMC has its own continuous power system for emergency power generation.

On the morning of the 3rd, there was another news of a power outage in Taiwan, which said it was due to an imbalance between power supply and demand in the south caused by an accident in the switch yard of the Xingda power plant.

According to reports, TSMC said that there is no power outage and does not affect daily work, while some plant areas are affected by power voltage drop in the morning, lasting about 400 to more than 1000 milliseconds, and the actual impact is being confirmed.

UMC pointed out that the situation is still being understood; Liji and World Advanced responded that it has not been affected at present, but it is still in the process of understanding, and will explain to the outside world later.

The Bamboo Science Administration said that at present, the known jurisdiction, including science parks such as Chunan and Tonggong, were not affected by the power outage, while the Southern Science Administration said that the voltage drop occurred after 9: 00, and the degree of influence of manufacturers was being checked. TSMC has its own continuous power system for emergency power generation.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
Aterian secures four-year extension for Kinunga tantalum-niobium project
5 hours ago
Aterian secures four-year extension for Kinunga tantalum-niobium project
Read More
Aterian secures four-year extension for Kinunga tantalum-niobium project
Aterian secures four-year extension for Kinunga tantalum-niobium project
[SMM Tantalum and Niobium Flash] Aterian plc has secured a four-year extension of its exploration licence for the Kinunga project in southern Rwanda, allowing the company to advance investigations into its tantalum and niobium mineralisation. The company is evaluating the potential to recover tantalum- and niobium-bearing minerals from weathered pegmatites while separately exploring lithium mineralisation in deeper, fresh rock. Initial metallurgical testwork is underway, with particular attention to recovering fine and ultra-fine tantalum-bearing material that can be lost during conventional artisanal processing. Aterian is also engaging potential technical and development partners to support the evaluation. The proposed development approach includes representative sampling, metallurgical testing and the potential installation of a wash plant with an additional fines-recovery circuit. If testwork demonstrates satisfactory recovery rates and concentrate quality, the company intends to consider bulk sampling and pilot processing before making any commercial development decision. Aterian has not yet established a mineral resource, confirmed commercial recovery rates or announced a production timetable for Kinunga. The licence extension nevertheless provides additional time for the company to assess the project's potential as a future source of Rwandan tantalum and niobium concentrate.
5 hours ago
Connected Minerals advances niobium drilling at Bailundo project
5 hours ago
Connected Minerals advances niobium drilling at Bailundo project
Read More
Connected Minerals advances niobium drilling at Bailundo project
Connected Minerals advances niobium drilling at Bailundo project
[SMM Niobium Flash] Connected Minerals has advanced its maiden diamond drilling programme at the Bailundo Carbonatite Project in Angola, where it is exploring for niobium and rare earth elements. In its 29 October quarterly report, the Australian-listed company reported that approximately 937 metres had been drilled across 14 diamond drill collars as of 27 October. Samples from the first seven holes had been dispatched for laboratory analysis, with initial results expected in mid-November. The company also acquired historical exploration records containing 10 diamond drill holes totalling 3,414.4 metres. Historical results include an intersection of 205.5 metres grading 1.0% niobium pentoxide (Nb₂O₅) from surface. The current drilling programme is intended to test the continuity of the mineralisation and improve understanding of the deposit's geological characteristics ahead of further exploration. Connected Minerals holds an indirect 80% interest in the project and is targeting a maiden JORC mineral resource estimate by the end of 2027, subject to drilling results and technical validation. Importantly, the reported high-grade intersections are historical results and should not be confused with assays from the ongoing drilling programme. No new assay results were confirmed in the latest company report reviewed.
5 hours ago
Zambian Government approves new mineral rights covering tantalum and niobium
5 hours ago
Zambian Government approves new mineral rights covering tantalum and niobium
Read More
Zambian Government approves new mineral rights covering tantalum and niobium
Zambian Government approves new mineral rights covering tantalum and niobium
[SMM Tantalum and Niobium Flash] Zambia's Minerals Regulation Commission has published the results of its second Mining and Non-Mining Rights Licensing Committee meeting, held on 28 September 2026, including approvals for mineral-right applications covering tantalum and niobium. Among the approved applications, Camco Mining Zambia Limited received approval for a small-scale mining licence covering 352.05 hectares in Kalomo, Southern Province, listing both tantalum and niobium among its target commodities. Barukabba Investment Zambia Limited also received approval for a small-scale exploration licence covering 26.58 hectares in Mkushi, Central Province, with tantalum and niobium included in its application. The decisions provide evidence of continued interest in Zambia's critical mineral exploration sector, particularly in areas outside the country's established copper-producing regions. However, approval of mineral-right applications should not be interpreted as confirmation of mineral discoveries, established resources or planned commercial production. Further exploration, geological assessment and technical work would be required to determine whether these areas contain economically viable tantalum and niobium deposits.
5 hours ago
Register to Continue Reading
Gain access to the latest insights in metals and new energy
Already have an account?Sign in here