[SMM Analysis] China's pre-baked anode exports increased by 23.4% in the first half of the year compared with the same period last year.

Đã xuất bản: Jul 28, 2020 09:10
SMM July 28th: according to customs statistics, domestic exports of prebaked anodes totaled 114000 tons in June 2020, down 12.78% from the same period last year and 30.95% from the previous month. From January to June, domestic exports of pre-baked anodes totaled 796500 tons, an increase of 23.4 percent over the same period last year.

SMM July 28th: according to customs statistics, domestic exports of prebaked anodes totaled 114000 tons in June 2020, down 12.78% from the same period last year and 30.95% from the previous month. From January to June, domestic exports of pre-baked anodes totaled 796500 tons, an increase of 23.4 percent over the same period last year.

Table 1 domestic export statistics of prebaked anodes in June 2020 (unit: 10,000 tons)

This month, the main exporters of domestic prebaked anodes are Canada, Russia and Malaysia, totaling 68000 tons, accounting for 59.6%. Among them, the total amount of anodes exported to Canada is about 24000 tons, down 33.7% from the previous month. The total amount of anodes exported to Russia was about 23700 tons, down 0.69% from the previous month. The total amount of anodes exported to Malaysia was about 20000 tons, down 48.76 per cent from the previous month.

Source: China Customs

SMM brief analysis: from the perspective of customs data, the export volume of China's prebaked anodes in the first half of this year was not affected by the epidemic and was on the rise as a whole. affected by the oversupply at home, domestic anode enterprises are paying more attention to foreign market demand, but due to the continued spread of the overseas epidemic, some overseas electrolytic aluminum enterprises have adjusted their operating capacity, and the anode orders of overseas aluminum plants after June may be affected. SMM predicts that the total amount of anode exports may be restrained in the second half of the year.

 

 

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
SHFE: Khối lượng chứng chỉ hợp kim nhôm đúc tăng 430 tấn lên 23.534 tấn vào ngày 14/9
16 giờ trước
SHFE: Khối lượng chứng chỉ hợp kim nhôm đúc tăng 430 tấn lên 23.534 tấn vào ngày 14/9
Đọc thêm
SHFE: Khối lượng chứng chỉ hợp kim nhôm đúc tăng 430 tấn lên 23.534 tấn vào ngày 14/9
SHFE: Khối lượng chứng chỉ hợp kim nhôm đúc tăng 430 tấn lên 23.534 tấn vào ngày 14/9
[SMM Tin nhanh] Dữ liệu từ SHFE cho thấy, ngày 14/9, tổng khối lượng chứng quyền đăng ký đối với hợp kim nhôm đúc là 23.534 tấn, tăng 430 tấn so với ngày giao dịch trước đó. Cụ thể, tổng khối lượng đăng ký tại Thượng Hải là 1.625 tấn, không đổi so với ngày giao dịch trước; tại Quảng Đông là 1.403 tấn, giảm 59 tấn; tại Giang Tô là 8.150 tấn, tăng 941 tấn; tại Chiết Giang là 10.012 tấn, giảm 362 tấn; tại Trùng Khánh là 2.165 tấn, không đổi; và tại Tứ Xuyên là 179 tấn, giảm 90 tấn.
16 giờ trước
Dữ liệu: Diễn biến thị trường SHFE, DCE (14/9)
16 giờ trước
Dữ liệu: Diễn biến thị trường SHFE, DCE (14/9)
Đọc thêm
Dữ liệu: Diễn biến thị trường SHFE, DCE (14/9)
Dữ liệu: Diễn biến thị trường SHFE, DCE (14/9)
Bảng dưới đây cho thấy biến động giá kim loại đen và kim loại màu trên SHFE và DCE vào ngày 14 tháng 9 năm 2026
16 giờ trước
Lượng xuất xưởng phôi nhôm tăng lên 38.900 tấn trong tuần từ 7-13/9
17 giờ trước
Lượng xuất xưởng phôi nhôm tăng lên 38.900 tấn trong tuần từ 7-13/9
Đọc thêm
Lượng xuất xưởng phôi nhôm tăng lên 38.900 tấn trong tuần từ 7-13/9
Lượng xuất xưởng phôi nhôm tăng lên 38.900 tấn trong tuần từ 7-13/9
【SMM Thống kê xuất kho phôi nhôm hàng tuần】Theo thống kê của SMM, từ ngày 7–13 tháng 9, tổng lượng xuất kho phôi nhôm trong nước đạt 38.900 tấn, tăng 2.800 tấn so với tuần trước.
17 giờ trước