[SMM Analysis] A brief Analysis of the reasons for the sudden increase in Import data of Copper Ore and unwrought Copper in June

Published: Jul 14, 2020 12:50 (GMT+8)

SMM7: according to the latest data released by the General Administration of Customs, China imported 656000 tons of unwrought copper and copper materials in June and 436000 tons in May, a month-on-month increase of 50.5 percent and a year-on-year increase of 98.8 percent (see figure 1 below). China imported 1.594 million tons of copper ore and its concentrate in June and 1.69 million tons in May, down 5.7 percent from the previous month and an increase of 8.7 percent over the same period last year.

SMM believes that the month-on-month increase in unwrought copper in June was due to the following reasons:

1: the import window of electrolytic copper opened for a long time in May, and the import profit was high (see figure 2 for details). The import profit in May was more than 250 yuan / ton for a long time, and even reached 640 yuan / ton at the highest. However, affected by factors such as the shipping date, a large number of imported copper was not cleared into the domestic market until June.

In June, the average monthly price of Shanghai Pingshui copper is 69.5 yuan / ton, and that of good copper is 104.5 yuan / ton. In June, the monthly average price of Guangdong Pingshui copper is 179.5 yuan / ton, and the monthly average price of good copper is 204yuan / ton, which is much higher than the long order price. Thus it can be seen that Gaoshengshui is another important reason for importers to increase customs clearance.

In June, the price gap of fine waste widened, maintaining a profit of 1500 yuan / ton for a long time and nearly 2000 yuan / ton at its peak. (see figure 4 for details); and the local market has been able to import in the name of recycled copper since July, so many importers of scrap copper are actively importing in order to digest the import approvals previously obtained.

Looking forward to July, we believe that the import volume of unwrought copper in July will be lower than that in June (the opening time of the import window will be reduced), and the import volume of scrap copper will also decrease month-on-month, but will still increase compared with the same period last year.

However, compared with the surge in electrolytic copper imports, copper concentrate imports were 1.594 million tons in June, which decreased by 5.7% month-on-month, although it increased by 8.7% compared with the same period last year (see figure 5 for details).

The main reason why copper concentrate imports continued to decline month-on-month is that South America is the main source of China's copper concentrate imports, with physical tonnage from Chile and Peru accounting for 54% of China's total copper concentrate imports in May. However, the epidemic situation in the above two countries has been poorly controlled, the operating rate of local mines is not high, even some mines are still being closed, and the port delivery efficiency is inefficient, which are all important factors contributing to the tight supply of copper concentrates. we expect imports of copper concentrates to continue to decline in July.

 

"View SMM spot copper historical price

"Click to participate in the second China (Yingtan) Copper Industry Summit Forum and the 15th China International Copper Industry chain Summit"

"these enterprises have signed up! (part of the list of participants is attached)

To sign up for the summit or apply to join the SMM industry exchange group, please scan the code:

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
[SMM Announcement] Chinese Market Metal Prices and News Updates Suspended during National Day Holiday (Oct 1-7)
38 mins ago
[SMM Announcement] Chinese Market Metal Prices and News Updates Suspended during National Day Holiday (Oct 1-7)
Read More
[SMM Announcement] Chinese Market Metal Prices and News Updates Suspended during National Day Holiday (Oct 1-7)
[SMM Announcement] Chinese Market Metal Prices and News Updates Suspended during National Day Holiday (Oct 1-7)
38 mins ago
Koryx Copper Completes Haib PFS Drilling, Targets Updated Resource and PFS by Year-End
50 mins ago
Koryx Copper Completes Haib PFS Drilling, Targets Updated Resource and PFS by Year-End
Read More
Koryx Copper Completes Haib PFS Drilling, Targets Updated Resource and PFS by Year-End
Koryx Copper Completes Haib PFS Drilling, Targets Updated Resource and PFS by Year-End
Koryx Copper has completed its infill and expansion drilling programme at the wholly owned Haib Copper Project in southern Namibia, advancing the project toward an updated Mineral Resource Estimate (MRE) and Pre-Feasibility Study (PFS) targeted for publication before the end of 2026.​ The company reported assay results from a further 18 drill holes totalling 7,074 metres. Among the latest results, hole HM199 returned 438 metres grading 0.40% copper equivalent (CuEq), including 224 metres at 0.51% CuEq. Hole HM193 returned 681 metres at 0.34% CuEq, including 22 metres at 0.71% CuEq and 169 metres at 0.40% CuEq.​ Koryx said the results continued to demonstrate wide mineralised intercepts across the Haib deposit, together with higher-grade zones closer to surface in some areas. The company said the results broadly correlate with its existing geological model, while the completed drilling programme will feed into geological modelling and estimation work for the updated resource estimate and PFS.​ Haib is a large disseminated porphyry copper-molybdenum-gold deposit. Koryx currently envisages developing the project as a large-scale open-pit operation using conventional sulphide milling and flotation to produce copper and molybdenum concentrates.​ The latest drilling follows Koryx's March 2026 Mineral Resource Estimate, which reported 744 million mt of Indicated material grading 0.28% copper, containing approximately 2.09 million mt of copper, and 579 million mt of Inferred material grading 0.24% copper, containing approximately 1.39 million mt of copper, using a 0.15% copper cut-off. Koryx said the updated MRE and PFS remain on track for publication before the end of 2026.​ Completion of the PFS drilling programme marks another step in Koryx Copper's advancement of Haib toward a potential large-scale copper development. The latest drilling continues to show broad mineralised intervals, while the upcoming updated resource estimate will provide greater clarity on whether recent infill and expansion drilling has materially changed the project's resource base. Attention will now turn to the updated MRE and PFS expected before year-end, which should provide further detail on the proposed mine configuration, processing strategy, production profile and project economics.
50 mins ago
KCM Restarts Chingola B Mine, Targets Over 200,000 mt/month of Ore Productio
55 mins ago
KCM Restarts Chingola B Mine, Targets Over 200,000 mt/month of Ore Productio
Read More
KCM Restarts Chingola B Mine, Targets Over 200,000 mt/month of Ore Productio
KCM Restarts Chingola B Mine, Targets Over 200,000 mt/month of Ore Productio
Konkola Copper Mines (KCM) has restarted mining operations at its Chingola B Mine in Zambia, bringing the previously dormant operation back into production as part of the company's wider expansion programme across its Nchanga and Konkola operations.​ Chingola B, which forms part of the Nchanga mining complex, is projected to produce more than 200,000 mt of ore per month, compared with around 60,000 mt/month before its closure. The additional mine output is expected to increase ore feed available to KCM's processing operations.​ KCM Group Chief Executive Officer Deshnee Naidoo said the restart forms part of the company's broader programme to increase production across its operations and will add production at Nchanga underground. According to Naidoo, Chingola B is expected to contribute another 200,000 mt/month of ore as the company rebuilds its mining operations.​ The restart comes as KCM targets annual copper production of 300,000 mt by 2030. The company said its expansion programme is supported by more than US$1 billion of investment from Vedanta Resources across its operations.​ The development also comes amid Zambia's broader target of increasing national copper production to 3 million mt/year by 2031. KCM said the reactivation of dormant assets such as Chingola B is expected to contribute to efforts to increase domestic mine supply.​ The restart of Chingola B could strengthen ore availability across KCM's Nchanga operations, with planned output of more than 200,000 mt/month representing a substantial increase from the approximately 60,000 mt/month reported before closure. The additional mine feed is particularly relevant following KCM's recent rehabilitation and restart of the Nchanga Smelter. However, the 200,000 mt/month figure refers to ore production rather than contained or refined copper output, meaning the ultimate contribution to KCM's copper production will depend on ore grades, recoveries and processing performance. Progress at Chingola B will therefore be an important component of KCM's wider target of reaching 300,000 mt/year of copper production by 2030.
55 mins ago