SMM Evening Comments (Jun 18): SHFE base metals closed mostly higher on lingering recovery hopes

เผยแพร่แล้ว: Jun 18, 2020 18:31 (GMT+8)
SHFE nonferrous metals strengthened for the most part on Thursday, as lingering optimism over economic reopening outweighed concerns over a rise in coronavirus cases.

SHANGHAI, Jun 18 (SMM) – SHFE nonferrous metals strengthened for the most part on Thursday, as lingering optimism over economic reopening outweighed concerns over a rise in coronavirus cases.

 

Lead advanced 1.3% to be the biggest gainer, zinc rose 0.7%, tin climbed 0.4% and copper added 0.3%, while nickel stayed flat. Aluminium retreated 0.4%.

 

For copper, aluminium and zinc, their contracts for August delivery overtook the July ones became the most actively traded.

 

On the LME, base metals rose across the board as of 18:17 Beijing time, as oil prices resumed their rally.

 

A Chinese Centers for Disease Control and Prevention expert said at a news conference Thursday that a coronavirus outbreak in Beijing, which saw 21 new cases confirmed on Wednesday and 31 the day before, was now under control.

 

US jobless claims data is set to come out tonight, offering an update on the pace of the labor market’s recovery from the pandemic. Economist polled by Dow Jones expected a total of 1.30 million new filings for the week ending June 13, a decline from 1.54 million from the week prior.

 

Copper: The most traded contract for August delivery on the SHFE hovered in a tight range around the upper Bollinger band during the daytime session, holding onto overnight gains to close 0.26% higher at 46,760 yuan/mt. Its discount against the July contract came in at 160 yuan/mt, with little change to fundamentals which remain positive. With support at the five-day moving average, the contract is likely to try to break above the 47,000 mark.

 

Aluminium: The most liquid SHFE contract for August delivery moved in a tight range during the daytime session, failing to recover from overnight losses to close 0.4% lower at 13,555 yuan/mt, as SMM data showed that social inventories of primary aluminium ingots in China registered a much smaller decline this week. Fears of an end to the inventory decline amid the influx of imported cargoes and the release of invisible stockpiles, will limit upside in SHFE aluminium, deterring it from crossing the 14,000 mark.

 

Zinc: The most active contract on the SHFE for August delivery traded in a small range of 50 yuan/mt during the daytime session, and held onto overnight gains to close 0.73% higher at 16,625 yuan/mt. It is unlikely to stage a substantial pullback tonight, as market optimism stemming from slow mine resumption outweighs fears of a second wave of coronavirus outbreaks.

 

Nickel: The most traded SHFE contract for August delivery recovered from earlier losses to close flat at 103,250 yuan/mt, as longs and shorts diverged. It is expected to remain between the upper and middle Bollinger bands tonight.

The market has barely reacted to the implementation of Indonesia’s revised mining law on June 17. The new law allows miners building smelters to export ore for the next three years, but stipulates that the government can rule against the export of specific ores under a separate regulation.

 

Lead: The most active SHFE July contract advanced 1.26% to end at 14,485 yuan/mt, after hitting a two-week peak of 14,500 yuan/mt earlier in the session. It is likely to remain firm tonight if its LME counterpart extends its gains.

                                                                               

Tin: Longs lifted the most active SHFE August contract during the daytime session, which closed 0.38% higher at 138,490 yuan/mt after hovering in a tight range around the flatline in overnight trading. Pressure is seen at a previous high of 139,500.

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
High spot prices caused by high premiums; secondary copper rod enterprises maintain yesterday's quotes unchanged [SMM Secondary Copper Daily Review]
2 นาทีที่แล้ว
High spot prices caused by high premiums; secondary copper rod enterprises maintain yesterday's quotes unchanged [SMM Secondary Copper Daily Review]
อ่านเพิ่มเติม
High spot prices caused by high premiums; secondary copper rod enterprises maintain yesterday's quotes unchanged [SMM Secondary Copper Daily Review]
High spot prices caused by high premiums; secondary copper rod enterprises maintain yesterday's quotes unchanged [SMM Secondary Copper Daily Review]
2 นาทีที่แล้ว
โรงถลุงทองแดง Nchanga ของ Vedanta KCM กลับมาเดินเครื่องหลังการบำรุงรักษา
48 นาทีที่แล้ว
โรงถลุงทองแดง Nchanga ของ Vedanta KCM กลับมาเดินเครื่องหลังการบำรุงรักษา
อ่านเพิ่มเติม
โรงถลุงทองแดง Nchanga ของ Vedanta KCM กลับมาเดินเครื่องหลังการบำรุงรักษา
โรงถลุงทองแดง Nchanga ของ Vedanta KCM กลับมาเดินเครื่องหลังการบำรุงรักษา
SMM วันที่ 22 กันยายน: ตามรายงานของสื่อต่างประเทศเมื่อวันที่ 21 กันยายน บริษัท Konkola Copper Mines (KCM) ซึ่งเป็นบริษัทลูกในแซมเบียของ Vedanta Resources เปิดเผยว่าโรงถลุงทองแดง Nchanga ได้กลับมาดำเนินการอีกครั้งหลังจากการบำรุงรักษาและซ่อมแซมนานกว่าสามเดือน โรงถลุงแห่งนี้เริ่มดำเนินการในปี 2010 ด้วยเงินลงทุนก่อสร้างประมาณ 350 ล้านดอลลาร์สหรัฐ และมีกำลังการผลิตทองแดงปีละ 311,000 ตัน การปิดซ่อมบำรุงเดิมมีกำหนด 60 วัน แต่หลังจากพบรายการซ่อมแซมสำคัญเพิ่มเติมระหว่างการตรวจสอบโดยละเอียด ระยะเวลาบำรุงรักษาจึงขยายเป็น 106 วัน ด้วยค่าใช้จ่ายปรับปรุงประมาณ 40 ล้านดอลลาร์สหรัฐ นับเป็นการยกเครื่องครั้งใหญ่ครั้งแรกในรอบแปดปีของโรงถลุงแห่งนี้ ข้อมูลจากกระทรวงเหมืองแร่แซมเบียระบุว่าการผลิตทองแดงของ KCM ในปี 2025 อยู่ที่ 80,200 ตัน การบำรุงรักษาครั้งนี้เป็นส่วนหนึ่งของกลยุทธ์การปรับปรุงอุปกรณ์โดยรวมของบริษัท และ KCM มีแผนเพิ่มการผลิตทองแดงเป็น 300,000 ตันต่อปีภายในปี 2030 ขณะเดียวกัน รัฐบาลแซมเบียกำลังผลักดันการขยายอุตสาหกรรมทองแดงของประเทศ โดยวางแผนเพิ่มการผลิตทองแดงทั่วประเทศจาก 890,300 ตันในปี 2025 เป็น 3 ล้านตันภายในปี 2031 ปัจจุบันแซมเบียเป็นผู้ผลิตทองแดงรายใหญ่อันดับสองของแอฟริกา
48 นาทีที่แล้ว
【แฟลช | สภาพอากาศแปรปรวนทำให้อุปทานโมลิบดีนัมของชิลียังคงตึงตัว】
1 ชั่วโมงที่แล้ว
【แฟลช | สภาพอากาศแปรปรวนทำให้อุปทานโมลิบดีนัมของชิลียังคงตึงตัว】
อ่านเพิ่มเติม
【แฟลช | สภาพอากาศแปรปรวนทำให้อุปทานโมลิบดีนัมของชิลียังคงตึงตัว】
【แฟลช | สภาพอากาศแปรปรวนทำให้อุปทานโมลิบดีนัมของชิลียังคงตึงตัว】
SMM ได้รับข้อมูลจากทีมข่าวกรองตลาดของผู้ประกอบการเหมืองรายใหญ่ในต่างประเทศว่า ปริมาณฝนที่สูงกว่าปกติและสภาพอากาศเลวร้ายทั่วบางพื้นที่ของอเมริกาใต้ในเดือนกรกฎาคมและสิงหาคม ส่งผลกระทบต่อตารางการผลิตและการบำรุงรักษาของเหมืองบางแห่ง การดำเนินงานในภูมิภาคดีขึ้นในเดือนกันยายน แต่ปริมาณแร่ยังคงตึงตัว เหมืองทองแดง-โมลิบดีนัมบางแห่งยังคงมีความจำเป็นต้องบำรุงรักษาหลังสภาพอากาศเลวร้าย ซึ่งอาจยังคงจำกัดอุปทานโมลิบดีนัมผลพลอยได้ของชิลี และหนุนราคาโมลิบดีนัมในต่างประเทศให้อยู่ในระดับสูง
1 ชั่วโมงที่แล้ว