[SMM analysis] the operating rate of aluminum sheet and strip increased significantly in March compared with the previous month, and fell back in April into an established fact.

Publicado: Apr 13, 2020 19:01 (GMT+8)
SMM conducted a survey of the aluminum plate and strip market in March and learned that the average weighted operating rate of China's aluminum plate and strip industry was 62.25% in March, up 13 percentage points from the previous month, down more than 10 percentage points from the same period last year, and is expected to fall slightly to 61 per cent in April 2020.

SMM conducted a survey of the aluminum plate and strip market in March and learned that the average weighted operating rate of China's aluminum plate and strip industry was 62.25% in March, up 13 percentage points from the previous month, down more than 10 percentage points from the same period last year, and is expected to fall slightly to 61 per cent in April 2020.

Source: SMM

At the beginning of March, most of the production conditions of plate and strip enterprises in the industry returned to normal, and some enterprises were still in a state of semi-shutdown due to less orders and slow rework of employees. The start-up rate in March was higher than that in February, mainly due to the fact that most of the plate and belt enterprises in the industry were on holiday in February due to the influence of the epidemic situation, and the start-up rate was relatively low in March, while in March, with the gradual resumption of work and resumption of production, the start-up rate was also relatively higher, and some of the order production plans delayed during the February holiday were released in March, resulting in a significant increase in the start-up rate in March.

Last year, it is still worse than last year, and the terminal consumer market is limited by the weak performance of the epidemic. According to the order category, the performance of building plate and 3C electronic material is relatively stable, the performance of packaging orders such as tank material is relatively weak, the worst is automobile plate, the domestic automobile industry is depressed in March, and foreign car factories in Japan, Europe and the United States and Europe and the United States have stopped production, which has a direct impact on the export of relevant automobile aluminum and domestic trade orders. In addition, most of the aluminum plate and strip enterprises reported that the severity of the epidemic abroad gradually escalated in the middle and late March, and export orders were significantly affected. Customers have withdrawn orders and delayed pick-up of shipments, or customers have been affected by the foreign epidemic and then reduced their orders for cooperation with themselves. In the aspect of finished product inventory, most of the enterprises feedback that their finished product inventory is high, mainly due to the slow pick-up of end customers, and there is obvious pressure on their own funds.

As far as April is concerned, the current corporate feedback is not optimistic. First of all, the export proportion of large plate and strip enterprises in Shandong, Henan, and Fujian is relatively high, between 30% and 50% as a whole, and about 20% of the indirect exports of small and medium-sized enterprises also exist. However, the epidemic situation has not yet appeared an inflection point overseas, and there is even a further serious trend. Overseas countries have adopted measures to seal off countries and ports, and it seems to have become an established fact that export orders continue to decline from April to May. Against the background of weak domestic trade orders, Foreign trade has made matters worse, and the start-up rate in April is expected to be lower than in March.

(SMM Xuman 021-51595898)

 

Declaração sobre a Fonte de Dados: Com exceção das informações publicamente disponíveis, todos os demais dados são processados pela SMM com base em informações publicamente disponíveis, comunicação de mercado e com base no modelo de base de dados interna da SMM. São apenas para referência e não constituem recomendações para a tomada de decisão.

Para quaisquer perguntas ou para obter mais informações, entre em contato: lemonzhao@smm.cn
Para mais informações sobre como aceder aos nossos relatórios de investigação, entre em contato:service.en@smm.cn
Notícias Relacionadas
【SMM Aluminum Flash News】Global Aluminum Can Recycling Rate Rises to 76%, Targeting 80% by 2030
há 3 minutos
【SMM Aluminum Flash News】Global Aluminum Can Recycling Rate Rises to 76%, Targeting 80% by 2030
Leia mais
【SMM Aluminum Flash News】Global Aluminum Can Recycling Rate Rises to 76%, Targeting 80% by 2030
【SMM Aluminum Flash News】Global Aluminum Can Recycling Rate Rises to 76%, Targeting 80% by 2030
The 2026 Global Beverage Container Recycling Dataset released by the Global Beverage Can Circularity Alliance shows that the global aluminum can recycling rate has increased from 74.8% to 76%, while the collection rate reached 77%, remaining ahead of other major beverage packaging formats. PET bottles recorded collection and recycling rates of 69% and 54%, respectively, compared with 56% and 51% for glass bottles. The dataset covers markets representing at least 84% of global sales for each packaging format. The industry is targeting an 80% recycling rate for used beverage cans by 2030, followed by a goal of approaching 100% by 2050. India, Indonesia, Saudi Arabia, Türkiye and Nigeria are among the emerging beverage markets highlighted for further improvements in collection and recycling systems.
há 3 minutos
【SMM Aluminum Flash News】Cameroon’s Minim Martap Bauxite Project Faces Funding Setback, First Shipment Delayed
há 3 minutos
【SMM Aluminum Flash News】Cameroon’s Minim Martap Bauxite Project Faces Funding Setback, First Shipment Delayed
Leia mais
【SMM Aluminum Flash News】Cameroon’s Minim Martap Bauxite Project Faces Funding Setback, First Shipment Delayed
【SMM Aluminum Flash News】Cameroon’s Minim Martap Bauxite Project Faces Funding Setback, First Shipment Delayed
Canyon Resources’ Minim Martap bauxite project in Cameroon faces fresh uncertainty after AFG Bank Cameroon suspended further drawdowns from the project’s syndicated financing facility on August 24, pending a review of its development schedule, financial model and economic assumptions. Canyon has confirmed that Phase 1 will not meet its previous timetable and has withdrawn its Q4 2026 first-shipment target, with no new date announced. Minim Martap has a mineral resource of around 1.1 billion tonnes and an ore reserve of 144 million tonnes, averaging approximately 51% alumina and 2% silica. Canyon held around AUD 31 million in cash at the end of July, while approximately $75 million had already been drawn from the CFA 82 billion syndicated facility. The company is reducing non-essential spending while reassessing the project’s development and funding pathway.
há 3 minutos
【SMM Notícias Rápidas sobre Alumínio】Caterpillar Lança Três Novas Máquinas na Índia para Aplicações de Mineração e Infraestrutura
há 4 minutos
【SMM Notícias Rápidas sobre Alumínio】Caterpillar Lança Três Novas Máquinas na Índia para Aplicações de Mineração e Infraestrutura
Leia mais
【SMM Notícias Rápidas sobre Alumínio】Caterpillar Lança Três Novas Máquinas na Índia para Aplicações de Mineração e Infraestrutura
【SMM Notícias Rápidas sobre Alumínio】Caterpillar Lança Três Novas Máquinas na Índia para Aplicações de Mineração e Infraestrutura
A Caterpillar lançou a escavadeira hidráulica Cat 355, o trator de esteiras Cat D5 e a motoniveladora Cat 120 GC na bauma CONEXPO India 2026, visando aplicações em mineração, infraestrutura pesada e construção de estradas. A Cat 355 conta com motor C13B e sistema eletro-hidráulico com opções de caçamba de até 4,5 m³, enquanto o Cat D5 é equipado com motor C7.1 de 170 hp e lâmina de 4,3 m³. A Cat 120 GC foi projetada principalmente para manutenção de estradas e aplicações de acabamento. Os lançamentos ampliam ainda mais a oferta de equipamentos da Caterpillar para os setores de mineração e infraestrutura da Índia.
há 4 minutos